tests/test-blackbox.t

exchange: make clone bundles non-experimental and enabled by default

The clone bundles feature was introduced in Mercurial 3.6 behind an
experimental and disabled by default flag. The feature has been enabled
on hg.mozilla.org for a few months and has served many terabytes of
clones. Users have been encouraged to use the feature and reception
has been very positive (mainly due to faster clones as a result of
connecting to a CDN). I have heard no feedback about changing the
feature other than inquiries about when it will be enabled by default.
So, I think the feature is ready to be enabled by default.

This patch renames experimental.clonebundles to ui.clonebundles,
documents the option, and enables it by default. References to the
experimental state of clone bundles have been removed. The remaining
config option docs in clonebundles.py have been removed because they
are redudant with `hg help config`.

There are some oddities with behavior of clone bundles. Because clones
with clone bundles are effectively 2 `hg pull` operations, there may be
2 transactions. This could result in hooks running twice. If the
subsequent pull is aborted, it could result in partial rollback and an
incomplete clone. This behavior is a bit wonky and should probably
be documented. If this patch is accepted, I'll send a follow-up to
document it. I don't think this behavior should prevent the feature
being enabled by default. Reworking the clone mechanism to support
interrupted or multi-part clones feels like a major new feature and
something that when implemented can change the hook and rollback
semantics of clone bundles. Besides, partial clone is better than
full rollback and hooks running on initial clone are likely rare, so I
think the impact is minimal.

setup
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > blackbox=
  > mock=$TESTDIR/mockblackbox.py
  > mq=
  > EOF
  $ hg init blackboxtest
  $ cd blackboxtest

command, exit codes, and duration

  $ echo a > a
  $ hg add a
  $ hg blackbox
  1970/01/01 00:00:00 bob (*)> add a (glob)
  1970/01/01 00:00:00 bob (*)> add a exited 0 after * seconds (glob)

incoming change tracking

create two heads to verify that we only see one change in the log later
  $ hg commit -ma
  $ hg up null
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo b > b
  $ hg commit -Amb
  adding b
  created new head

clone, commit, pull
  $ hg clone . ../blackboxtest2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo c > c
  $ hg commit -Amc
  adding c
  $ cd ../blackboxtest2
  $ hg pull
  pulling from $TESTTMP/blackboxtest (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  (run 'hg update' to get a working copy)
  $ hg blackbox -l 5
  1970/01/01 00:00:00 bob (*)> pull (glob)
  1970/01/01 00:00:00 bob (*)> updated served branch cache in ?.???? seconds (glob)
  1970/01/01 00:00:00 bob (*)> wrote served branch cache with 1 labels and 2 nodes (glob)
  1970/01/01 00:00:00 bob (*)> 1 incoming changes - new heads: d02f48003e62 (glob)
  1970/01/01 00:00:00 bob (*)> pull exited 0 after * seconds (glob)

we must not cause a failure if we cannot write to the log

  $ hg rollback
  repository tip rolled back to revision 1 (undo pull)

#if unix-permissions no-root
  $ chmod 000 .hg/blackbox.log
  $ hg --debug incoming
  warning: cannot write to blackbox.log: Permission denied
  comparing with $TESTTMP/blackboxtest (glob)
  query 1; heads
  searching for changes
  all local heads known remotely
  changeset:   2:d02f48003e62c24e2659d97d30f2a83abe5d5d51
  tag:         tip
  phase:       draft
  parent:      1:6563da9dcf87b1949716e38ff3e3dfaa3198eb06
  parent:      -1:0000000000000000000000000000000000000000
  manifest:    2:ab9d46b053ebf45b7996f2922b9893ff4b63d892
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files+:      c
  extra:       branch=default
  description:
  c
  
  
#endif
  $ hg pull
  pulling from $TESTTMP/blackboxtest (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  (run 'hg update' to get a working copy)

a failure reading from the log is fine
#if unix-permissions no-root
  $ hg blackbox -l 3
  abort: Permission denied: $TESTTMP/blackboxtest2/.hg/blackbox.log
  [255]

  $ chmod 600 .hg/blackbox.log
#endif

backup bundles get logged

  $ touch d
  $ hg commit -Amd
  adding d
  created new head
  $ hg strip tip
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  saved backup bundle to $TESTTMP/blackboxtest2/.hg/strip-backup/*-backup.hg (glob)
  $ hg blackbox -l 5
  1970/01/01 00:00:00 bob (*)> strip tip (glob)
  1970/01/01 00:00:00 bob (*)> saved backup bundle to $TESTTMP/blackboxtest2/.hg/strip-backup/*-backup.hg (glob)
  1970/01/01 00:00:00 bob (*)> updated base branch cache in ?.???? seconds (glob)
  1970/01/01 00:00:00 bob (*)> wrote base branch cache with 1 labels and 2 nodes (glob)
  1970/01/01 00:00:00 bob (*)> strip tip exited 0 after * seconds (glob)

extension and python hooks - use the eol extension for a pythonhook

  $ echo '[extensions]' >> .hg/hgrc
  $ echo 'eol=' >> .hg/hgrc
  $ echo '[hooks]' >> .hg/hgrc
  $ echo 'update = echo hooked' >> .hg/hgrc
  $ hg update
  hooked
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg blackbox -l 5
  1970/01/01 00:00:00 bob (*)> update (glob)
  1970/01/01 00:00:00 bob (*)> writing .hg/cache/tags2-visible with 0 tags (glob)
  1970/01/01 00:00:00 bob (*)> pythonhook-preupdate: hgext.eol.preupdate finished in * seconds (glob)
  1970/01/01 00:00:00 bob (*)> exthook-update: echo hooked finished in * seconds (glob)
  1970/01/01 00:00:00 bob (*)> update exited 0 after * seconds (glob)

log rotation

  $ echo '[blackbox]' >> .hg/hgrc
  $ echo 'maxsize = 20 b' >> .hg/hgrc
  $ echo 'maxfiles = 3' >> .hg/hgrc
  $ hg status
  $ hg status
  $ hg status
  $ hg tip -q
  2:d02f48003e62
  $ ls .hg/blackbox.log*
  .hg/blackbox.log
  .hg/blackbox.log.1
  .hg/blackbox.log.2

cleanup
  $ cd ..