tests/test-largefiles-cache.t

exchange: make clone bundles non-experimental and enabled by default

The clone bundles feature was introduced in Mercurial 3.6 behind an
experimental and disabled by default flag. The feature has been enabled
on hg.mozilla.org for a few months and has served many terabytes of
clones. Users have been encouraged to use the feature and reception
has been very positive (mainly due to faster clones as a result of
connecting to a CDN). I have heard no feedback about changing the
feature other than inquiries about when it will be enabled by default.
So, I think the feature is ready to be enabled by default.

This patch renames experimental.clonebundles to ui.clonebundles,
documents the option, and enables it by default. References to the
experimental state of clone bundles have been removed. The remaining
config option docs in clonebundles.py have been removed because they
are redudant with `hg help config`.

There are some oddities with behavior of clone bundles. Because clones
with clone bundles are effectively 2 `hg pull` operations, there may be
2 transactions. This could result in hooks running twice. If the
subsequent pull is aborted, it could result in partial rollback and an
incomplete clone. This behavior is a bit wonky and should probably
be documented. If this patch is accepted, I'll send a follow-up to
document it. I don't think this behavior should prevent the feature
being enabled by default. Reworking the clone mechanism to support
interrupted or multi-part clones feels like a major new feature and
something that when implemented can change the hook and rollback
semantics of clone bundles. Besides, partial clone is better than
full rollback and hooks running on initial clone are likely rare, so I
think the impact is minimal.

Create user cache directory

  $ USERCACHE=`pwd`/cache; export USERCACHE
  $ cat <<EOF >> ${HGRCPATH}
  > [extensions]
  > hgext.largefiles=
  > [largefiles]
  > usercache=${USERCACHE}
  > EOF
  $ mkdir -p ${USERCACHE}

Create source repo, and commit adding largefile.

  $ hg init src
  $ cd src
  $ echo large > large
  $ hg add --large large
  $ hg commit -m 'add largefile'
  $ hg rm large
  $ hg commit -m 'branchhead without largefile'
  $ hg up -qr 0
  $ cd ..

Discard all cached largefiles in USERCACHE

  $ rm -rf ${USERCACHE}

Create mirror repo, and pull from source without largefile:
"pull" is used instead of "clone" for suppression of (1) updating to
tip (= caching largefile from source repo), and (2) recording source
repo as "default" path in .hg/hgrc.

  $ hg init mirror
  $ cd mirror
  $ hg pull ../src
  pulling from ../src
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  (run 'hg update' to get a working copy)

Update working directory to "tip", which requires largefile("large"),
but there is no cache file for it.  So, hg must treat it as
"missing"(!) file.

  $ hg update -r0
  getting changed largefiles
  large: largefile 7f7097b041ccf68cc5561e9600da4655d21c6d18 not available from file:/*/$TESTTMP/mirror (glob)
  0 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg status
  ! large

Update working directory to null: this cleanup .hg/largefiles/dirstate

  $ hg update null
  getting changed largefiles
  0 largefiles updated, 0 removed
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved

Update working directory to tip, again.

  $ hg update -r0
  getting changed largefiles
  large: largefile 7f7097b041ccf68cc5561e9600da4655d21c6d18 not available from file:/*/$TESTTMP/mirror (glob)
  0 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg status
  ! large
  $ cd ..

Verify that largefiles from pulled branchheads are fetched, also to an empty repo

  $ hg init mirror2
  $ hg -R mirror2 pull src -r0
  pulling from src
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  (run 'hg update' to get a working copy)

#if unix-permissions

Portable way to print file permissions:

  $ cat > ls-l.py <<EOF
  > #!/usr/bin/env python
  > import sys, os
  > path = sys.argv[1]
  > print '%03o' % (os.lstat(path).st_mode & 0777)
  > EOF
  $ chmod +x ls-l.py

Test that files in .hg/largefiles inherit mode from .hg/store, not
from file in working copy:

  $ cd src
  $ chmod 750 .hg/store
  $ chmod 660 large
  $ echo change >> large
  $ hg commit -m change
  created new head
  $ ../ls-l.py .hg/largefiles/e151b474069de4ca6898f67ce2f2a7263adf8fea
  640

Test permission of with files in .hg/largefiles created by update:

  $ cd ../mirror
  $ rm -r "$USERCACHE" .hg/largefiles # avoid links
  $ chmod 750 .hg/store
  $ hg pull ../src --update -q
  $ ../ls-l.py .hg/largefiles/e151b474069de4ca6898f67ce2f2a7263adf8fea
  640

Test permission of files created by push:

  $ hg serve -R ../src -d -p $HGPORT --pid-file hg.pid \
  >          --config "web.allow_push=*" --config web.push_ssl=no
  $ cat hg.pid >> $DAEMON_PIDS

  $ echo change >> large
  $ hg commit -m change

  $ rm -r "$USERCACHE"

  $ hg push -q http://localhost:$HGPORT/

  $ ../ls-l.py ../src/.hg/largefiles/b734e14a0971e370408ab9bce8d56d8485e368a9
  640

  $ cd ..

#endif

Test issue 4053 (remove --after on a deleted, uncommitted file shouldn't say
it is missing, but a remove on a nonexistent unknown file still should.  Same
for a forget.)

  $ cd src
  $ touch x
  $ hg add x
  $ mv x y
  $ hg remove -A x y ENOENT
  ENOENT: * (glob)
  not removing y: file is untracked
  [1]
  $ hg add y
  $ mv y z
  $ hg forget y z ENOENT
  ENOENT: * (glob)
  not removing z: file is already untracked
  [1]

Largefiles are accessible from the share's store
  $ cd ..
  $ hg share -q src share_dst --config extensions.share=
  $ hg -R share_dst update -r0
  getting changed largefiles
  1 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ echo modified > share_dst/large
  $ hg -R share_dst ci -m modified
  created new head

Only dirstate is in the local store for the share, and the largefile is in the
share source's local store.  Avoid the extra largefiles added in the unix
conditional above.
  $ hash=`hg -R share_dst cat share_dst/.hglf/large`
  $ echo $hash
  e2fb5f2139d086ded2cb600d5a91a196e76bf020

  $ find share_dst/.hg/largefiles/* | sort
  share_dst/.hg/largefiles/dirstate

  $ find src/.hg/largefiles/* | egrep "(dirstate|$hash)" | sort
  src/.hg/largefiles/dirstate
  src/.hg/largefiles/e2fb5f2139d086ded2cb600d5a91a196e76bf020

Inject corruption into the largefiles store and see how update handles that:

  $ cd src
  $ hg up -qC
  $ cat large
  modified
  $ rm large
  $ cat .hglf/large
  e2fb5f2139d086ded2cb600d5a91a196e76bf020
  $ mv .hg/largefiles/e2fb5f2139d086ded2cb600d5a91a196e76bf020 ..
  $ echo corruption > .hg/largefiles/e2fb5f2139d086ded2cb600d5a91a196e76bf020
  $ hg up -C
  getting changed largefiles
  large: data corruption in $TESTTMP/src/.hg/largefiles/e2fb5f2139d086ded2cb600d5a91a196e76bf020 with hash 6a7bb2556144babe3899b25e5428123735bb1e27 (glob)
  0 largefiles updated, 0 removed
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg st
  ! large
  ? z
  $ rm .hg/largefiles/e2fb5f2139d086ded2cb600d5a91a196e76bf020

#if serve

Test coverage of error handling from putlfile:

  $ mkdir $TESTTMP/mirrorcache
  $ hg serve -R ../mirror -d -p $HGPORT1 --pid-file hg.pid --config largefiles.usercache=$TESTTMP/mirrorcache
  $ cat hg.pid >> $DAEMON_PIDS

  $ hg push http://localhost:$HGPORT1 -f --config files.usercache=nocache
  pushing to http://localhost:$HGPORT1/
  searching for changes
  abort: remotestore: could not open file $TESTTMP/src/.hg/largefiles/e2fb5f2139d086ded2cb600d5a91a196e76bf020: HTTP Error 403: ssl required
  [255]

  $ rm .hg/largefiles/e2fb5f2139d086ded2cb600d5a91a196e76bf020

Test coverage of 'missing from store':

  $ hg serve -R ../mirror -d -p $HGPORT2 --pid-file hg.pid --config largefiles.usercache=$TESTTMP/mirrorcache --config "web.allow_push=*" --config web.push_ssl=no
  $ cat hg.pid >> $DAEMON_PIDS

  $ hg push http://localhost:$HGPORT2 -f --config largefiles.usercache=nocache
  pushing to http://localhost:$HGPORT2/
  searching for changes
  abort: largefile e2fb5f2139d086ded2cb600d5a91a196e76bf020 missing from store (needs to be uploaded)
  [255]

#endif