tests/test-merge-types.t

exchange: make clone bundles non-experimental and enabled by default

The clone bundles feature was introduced in Mercurial 3.6 behind an
experimental and disabled by default flag. The feature has been enabled
on hg.mozilla.org for a few months and has served many terabytes of
clones. Users have been encouraged to use the feature and reception
has been very positive (mainly due to faster clones as a result of
connecting to a CDN). I have heard no feedback about changing the
feature other than inquiries about when it will be enabled by default.
So, I think the feature is ready to be enabled by default.

This patch renames experimental.clonebundles to ui.clonebundles,
documents the option, and enables it by default. References to the
experimental state of clone bundles have been removed. The remaining
config option docs in clonebundles.py have been removed because they
are redudant with `hg help config`.

There are some oddities with behavior of clone bundles. Because clones
with clone bundles are effectively 2 `hg pull` operations, there may be
2 transactions. This could result in hooks running twice. If the
subsequent pull is aborted, it could result in partial rollback and an
incomplete clone. This behavior is a bit wonky and should probably
be documented. If this patch is accepted, I'll send a follow-up to
document it. I don't think this behavior should prevent the feature
being enabled by default. Reworking the clone mechanism to support
interrupted or multi-part clones feels like a major new feature and
something that when implemented can change the hook and rollback
semantics of clone bundles. Besides, partial clone is better than
full rollback and hooks running on initial clone are likely rare, so I
think the impact is minimal.

#require symlink execbit

  $ tellmeabout() {
  > if [ -h $1 ]; then
  >     echo $1 is a symlink:
  >     $TESTDIR/readlink.py $1
  > elif [ -x $1 ]; then
  >     echo $1 is an executable file with content:
  >     cat $1
  > else
  >     echo $1 is a plain file with content:
  >     cat $1
  > fi
  > }

  $ hg init test1
  $ cd test1

  $ echo a > a
  $ hg ci -Aqmadd
  $ chmod +x a
  $ hg ci -mexecutable

  $ hg up -q 0
  $ rm a
  $ ln -s symlink a
  $ hg ci -msymlink
  created new head

Symlink is local parent, executable is other:

  $ hg merge --debug
    searching for copies back to rev 1
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: c334dc3be0da, local: 521a1e40188f+, remote: 3574f3e69b1c
   preserving a for resolve of a
   a: versions differ -> m (premerge)
  picked tool ':merge' for a (binary False symlink True changedelete False)
  merging a
  my a@521a1e40188f+ other a@3574f3e69b1c ancestor a@c334dc3be0da
  warning: internal :merge cannot merge symlinks for a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]

  $ tellmeabout a
  a is a symlink:
  a -> symlink
  $ hg resolve a --tool internal:other
  (no more unresolved files)
  $ tellmeabout a
  a is an executable file with content:
  a
  $ hg st
  M a
  ? a.orig

Symlink is other parent, executable is local:

  $ hg update -C 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg merge --debug --tool :union
    searching for copies back to rev 1
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: c334dc3be0da, local: 3574f3e69b1c+, remote: 521a1e40188f
   preserving a for resolve of a
   a: versions differ -> m (premerge)
  picked tool ':union' for a (binary False symlink True changedelete False)
  merging a
  my a@3574f3e69b1c+ other a@521a1e40188f ancestor a@c334dc3be0da
  warning: internal :union cannot merge symlinks for a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]

  $ tellmeabout a
  a is an executable file with content:
  a

  $ hg update -C 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg merge --debug --tool :merge3
    searching for copies back to rev 1
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: c334dc3be0da, local: 3574f3e69b1c+, remote: 521a1e40188f
   preserving a for resolve of a
   a: versions differ -> m (premerge)
  picked tool ':merge3' for a (binary False symlink True changedelete False)
  merging a
  my a@3574f3e69b1c+ other a@521a1e40188f ancestor a@c334dc3be0da
  warning: internal :merge3 cannot merge symlinks for a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]

  $ tellmeabout a
  a is an executable file with content:
  a

  $ hg update -C 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg merge --debug --tool :merge-local
    searching for copies back to rev 1
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: c334dc3be0da, local: 3574f3e69b1c+, remote: 521a1e40188f
   preserving a for resolve of a
   a: versions differ -> m (premerge)
  picked tool ':merge-local' for a (binary False symlink True changedelete False)
  merging a
  my a@3574f3e69b1c+ other a@521a1e40188f ancestor a@c334dc3be0da
  warning: internal :merge-local cannot merge symlinks for a
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]

  $ tellmeabout a
  a is an executable file with content:
  a

  $ hg update -C 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg merge --debug --tool :merge-other
    searching for copies back to rev 1
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: c334dc3be0da, local: 3574f3e69b1c+, remote: 521a1e40188f
   preserving a for resolve of a
   a: versions differ -> m (premerge)
  picked tool ':merge-other' for a (binary False symlink True changedelete False)
  merging a
  my a@3574f3e69b1c+ other a@521a1e40188f ancestor a@c334dc3be0da
  warning: internal :merge-other cannot merge symlinks for a
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]

  $ tellmeabout a
  a is an executable file with content:
  a

Update to link without local change should get us a symlink (issue3316):

  $ hg up -C 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg up
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg st
  ? a.orig

Update to link with local change should cause a merge prompt (issue3200):

  $ hg up -Cq 0
  $ echo data > a
  $ HGMERGE= hg up -y --debug
    searching for copies back to rev 2
  resolving manifests
   branchmerge: False, force: False, partial: False
   ancestor: c334dc3be0da, local: c334dc3be0da+, remote: 521a1e40188f
   preserving a for resolve of a
   a: versions differ -> m (premerge)
  (couldn't find merge tool hgmerge|tool hgmerge can't handle symlinks) (re)
  picked tool ':prompt' for a (binary False symlink True changedelete False)
  no tool found to merge a
  keep (l)ocal, take (o)ther, or leave (u)nresolved? u
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges
  [1]
  $ hg diff --git
  diff --git a/a b/a
  old mode 120000
  new mode 100644
  --- a/a
  +++ b/a
  @@ -1,1 +1,1 @@
  -symlink
  \ No newline at end of file
  +data


Test only 'l' change - happens rarely, except when recovering from situations
where that was what happened.

  $ hg init test2
  $ cd test2
  $ printf base > f
  $ hg ci -Aqm0
  $ echo file > f
  $ echo content >> f
  $ hg ci -qm1
  $ hg up -qr0
  $ rm f
  $ ln -s base f
  $ hg ci -qm2
  $ hg merge
  merging f
  warning: internal :merge cannot merge symlinks for f
  warning: conflicts while merging f! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ tellmeabout f
  f is a symlink:
  f -> base

  $ hg up -Cqr1
  $ hg merge
  merging f
  warning: internal :merge cannot merge symlinks for f
  warning: conflicts while merging f! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ tellmeabout f
  f is a plain file with content:
  file
  content

  $ cd ..

Test removed 'x' flag merged with change to symlink

  $ hg init test3
  $ cd test3
  $ echo f > f
  $ chmod +x f
  $ hg ci -Aqm0
  $ chmod -x f
  $ hg ci -qm1
  $ hg up -qr0
  $ rm f
  $ ln -s dangling f
  $ hg ci -qm2
  $ hg merge
  merging f
  warning: internal :merge cannot merge symlinks for f
  warning: conflicts while merging f! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ tellmeabout f
  f is a symlink:
  f -> dangling

  $ hg up -Cqr1
  $ hg merge
  merging f
  warning: internal :merge cannot merge symlinks for f
  warning: conflicts while merging f! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ tellmeabout f
  f is a plain file with content:
  f

Test removed 'x' flag merged with content change - both ways

  $ hg up -Cqr0
  $ echo change > f
  $ hg ci -qm3
  $ hg merge -r1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ tellmeabout f
  f is a plain file with content:
  change

  $ hg up -qCr1
  $ hg merge -r3
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ tellmeabout f
  f is a plain file with content:
  change

  $ cd ..

Test merge with no common ancestor:
a: just different
b: x vs -, different (cannot calculate x, cannot ask merge tool)
c: x vs -, same (cannot calculate x, merge tool is no good)
d: x vs l, different
e: x vs l, same
f: - vs l, different
g: - vs l, same
h: l vs l, different
(where same means the filelog entry is shared and there thus is an ancestor!)

  $ hg init test4
  $ cd test4
  $ echo 0 > 0
  $ hg ci -Aqm0

  $ echo 1 > a
  $ echo 1 > b
  $ chmod +x b
  $ echo x > c
  $ chmod +x c
  $ echo 1 > d
  $ chmod +x d
  $ printf x > e
  $ chmod +x e
  $ echo 1 > f
  $ printf x > g
  $ ln -s 1 h
  $ hg ci -qAm1

  $ hg up -qr0
  $ echo 2 > a
  $ echo 2 > b
  $ echo x > c
  $ ln -s 2 d
  $ ln -s x e
  $ ln -s 2 f
  $ ln -s x g
  $ ln -s 2 h
  $ hg ci -Aqm2

  $ hg merge
  merging a
  warning: cannot merge flags for b
  merging b
  warning: cannot merge flags for c
  merging d
  warning: internal :merge cannot merge symlinks for d
  warning: conflicts while merging d! (edit, then use 'hg resolve --mark')
  merging f
  warning: internal :merge cannot merge symlinks for f
  warning: conflicts while merging f! (edit, then use 'hg resolve --mark')
  merging h
  warning: internal :merge cannot merge symlinks for h
  warning: conflicts while merging h! (edit, then use 'hg resolve --mark')
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  warning: conflicts while merging b! (edit, then use 'hg resolve --mark')
  3 files updated, 0 files merged, 0 files removed, 5 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ hg resolve -l
  U a
  U b
  U d
  U f
  U h
  $ tellmeabout a
  a is a plain file with content:
  <<<<<<< local: 0139c5610547 - test: 2
  2
  =======
  1
  >>>>>>> other: 97e29675e796  - test: 1
  $ tellmeabout b
  b is a plain file with content:
  <<<<<<< local: 0139c5610547 - test: 2
  2
  =======
  1
  >>>>>>> other: 97e29675e796  - test: 1
  $ tellmeabout c
  c is a plain file with content:
  x
  $ tellmeabout d
  d is a symlink:
  d -> 2
  $ tellmeabout e
  e is a symlink:
  e -> x
  $ tellmeabout f
  f is a symlink:
  f -> 2
  $ tellmeabout g
  g is a symlink:
  g -> x
  $ tellmeabout h
  h is a symlink:
  h -> 2

  $ hg up -Cqr1
  $ hg merge
  merging a
  warning: cannot merge flags for b
  merging b
  warning: cannot merge flags for c
  merging d
  warning: internal :merge cannot merge symlinks for d
  warning: conflicts while merging d! (edit, then use 'hg resolve --mark')
  merging f
  warning: internal :merge cannot merge symlinks for f
  warning: conflicts while merging f! (edit, then use 'hg resolve --mark')
  merging h
  warning: internal :merge cannot merge symlinks for h
  warning: conflicts while merging h! (edit, then use 'hg resolve --mark')
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  warning: conflicts while merging b! (edit, then use 'hg resolve --mark')
  3 files updated, 0 files merged, 0 files removed, 5 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ tellmeabout a
  a is a plain file with content:
  <<<<<<< local: 97e29675e796  - test: 1
  1
  =======
  2
  >>>>>>> other: 0139c5610547 - test: 2
  $ tellmeabout b
  b is an executable file with content:
  <<<<<<< local: 97e29675e796  - test: 1
  1
  =======
  2
  >>>>>>> other: 0139c5610547 - test: 2
  $ tellmeabout c
  c is an executable file with content:
  x
  $ tellmeabout d
  d is an executable file with content:
  1
  $ tellmeabout e
  e is an executable file with content:
  x (no-eol)
  $ tellmeabout f
  f is a plain file with content:
  1
  $ tellmeabout g
  g is a plain file with content:
  x (no-eol)
  $ tellmeabout h
  h is a symlink:
  h -> 1

  $ cd ..