annotate tests/test-fileset.t @ 31454:a5bad127128d

branchmap: handle nullrev in setcachedata

906be86990 recently changed to switch from:

  self._rbcrevs[rbcrevidx:rbcrevidx + _rbcrecsize] = rec

to

  pack_into(_rbcrecfmt, self._rbcrevs, rbcrevidx, node, branchidx)

This causes an exception if rbcrevidx is -1 (i.e. the nullrev). The old code
handled this because python handles out of bound sets to arrays gracefully. The
new code throws because the self._rbcrevs buffer isn't long enough to write 8
bytes to.  Normally it would've been resized by the immediately preceding line,
but because the 0 length buffer is greater than the idx (-1) times the size, no
resize happens.

Setting the branch for the nullrev doesn't make sense anyway, so let's skip it.
This was caught by external tests in the Facebook extensions repo, but I've
added a test here that catches the issue.

  $ fileset() {
  >   hg debugfileset "$@"
  > }

  $ hg init repo
  $ cd repo
  $ echo a > a1
  $ echo a > a2
  $ echo b > b1
  $ echo b > b2
  $ hg ci -Am addfiles
  adding a1
  adding a2
  adding b1
  adding b2

Test operators and basic patterns

  $ fileset -v a1
  ('symbol', 'a1')
  a1
  $ fileset -v 'a*'
  ('symbol', 'a*')
  a1
  a2
  $ fileset -v '"re:a\d"'
  ('string', 're:a\\d')
  a1
  a2
  $ fileset -v 'a1 or a2'
  (or
    ('symbol', 'a1')
    ('symbol', 'a2'))
  a1
  a2
  $ fileset 'a1 | a2'
  a1
  a2
  $ fileset 'a* and "*1"'
  a1
  $ fileset 'a* & "*1"'
  a1
  $ fileset 'not (r"a*")'
  b1
  b2
  $ fileset '! ("a*")'
  b1
  b2
  $ fileset 'a* - a1'
  a2
  $ fileset 'a_b'
  $ fileset '"\xy"'
  hg: parse error: invalid \x escape
  [255]

Test files status

  $ rm a1
  $ hg rm a2
  $ echo b >> b2
  $ hg cp b1 c1
  $ echo c > c2
  $ echo c > c3
  $ cat > .hgignore <<EOF
  > \.hgignore
  > 2$
  > EOF
  $ fileset 'modified()'
  b2
  $ fileset 'added()'
  c1
  $ fileset 'removed()'
  a2
  $ fileset 'deleted()'
  a1
  $ fileset 'missing()'
  a1
  $ fileset 'unknown()'
  c3
  $ fileset 'ignored()'
  .hgignore
  c2
  $ fileset 'hgignore()'
  a2
  b2
  $ fileset 'clean()'
  b1
  $ fileset 'copied()'
  c1

Test files status in different revisions

  $ hg status -m
  M b2
  $ fileset -r0 'revs("wdir()", modified())' --traceback
  b2
  $ hg status -a
  A c1
  $ fileset -r0 'revs("wdir()", added())'
  c1
  $ hg status --change 0 -a
  A a1
  A a2
  A b1
  A b2
  $ hg status -mru
  M b2
  R a2
  ? c3
  $ fileset -r0 'added() and revs("wdir()", modified() or removed() or unknown())'
  b2
  a2
  $ fileset -r0 'added() or revs("wdir()", added())'
  a1
  a2
  b1
  b2
  c1

Test files properties

  >>> file('bin', 'wb').write('\0a')
  $ fileset 'binary()'
  $ fileset 'binary() and unknown()'
  bin
  $ echo '^bin$' >> .hgignore
  $ fileset 'binary() and ignored()'
  bin
  $ hg add bin
  $ fileset 'binary()'
  bin

  $ fileset 'grep("b{1}")'
  b2
  c1
  b1
  $ fileset 'grep("missingparens(")'
  hg: parse error: invalid match pattern: unbalanced parenthesis
  [255]

#if execbit
  $ chmod +x b2
  $ fileset 'exec()'
  b2
#endif

#if symlink
  $ ln -s b2 b2link
  $ fileset 'symlink() and unknown()'
  b2link
  $ hg add b2link
#endif

#if no-windows
  $ echo foo > con.xml
  $ fileset 'not portable()'
  con.xml
  $ hg --config ui.portablefilenames=ignore add con.xml
#endif

  >>> file('1k', 'wb').write(' '*1024)
  >>> file('2k', 'wb').write(' '*2048)
  $ hg add 1k 2k
  $ fileset 'size("bar")'
  hg: parse error: couldn't parse size: bar
  [255]
  $ fileset '(1k, 2k)'
  hg: parse error: can't use a list in this context
  (see hg help "filesets.x or y")
  [255]
  $ fileset 'size(1k)'
  1k
  $ fileset '(1k or 2k) and size("< 2k")'
  1k
  $ fileset '(1k or 2k) and size("<=2k")'
  1k
  2k
  $ fileset '(1k or 2k) and size("> 1k")'
  2k
  $ fileset '(1k or 2k) and size(">=1K")'
  1k
  2k
  $ fileset '(1k or 2k) and size(".5KB - 1.5kB")'
  1k
  $ fileset 'size("1M")'
  $ fileset 'size("1 GB")'

Test merge states

  $ hg ci -m manychanges
  $ hg up -C 0
  * files updated, 0 files merged, * files removed, 0 files unresolved (glob)
  $ echo c >> b2
  $ hg ci -m diverging b2
  created new head
  $ fileset 'resolved()'
  $ fileset 'unresolved()'
  $ hg merge
  merging b2
  warning: conflicts while merging b2! (edit, then use 'hg resolve --mark')
  * files updated, 0 files merged, 1 files removed, 1 files unresolved (glob)
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ fileset 'resolved()'
  $ fileset 'unresolved()'
  b2
  $ echo e > b2
  $ hg resolve -m b2
  (no more unresolved files)
  $ fileset 'resolved()'
  b2
  $ fileset 'unresolved()'
  $ hg ci -m merge

Test subrepo predicate

  $ hg init sub
  $ echo a > sub/suba
  $ hg -R sub add sub/suba
  $ hg -R sub ci -m sub
  $ echo 'sub = sub' > .hgsub
  $ hg init sub2
  $ echo b > sub2/b
  $ hg -R sub2 ci -Am sub2
  adding b
  $ echo 'sub2 = sub2' >> .hgsub
  $ fileset 'subrepo()'
  $ hg add .hgsub
  $ fileset 'subrepo()'
  sub
  sub2
  $ fileset 'subrepo("sub")'
  sub
  $ fileset 'subrepo("glob:*")'
  sub
  sub2
  $ hg ci -m subrepo

Test that .hgsubstate is updated as appropriate during a conversion.  The
saverev property is enough to alter the hashes of the subrepo.

  $ hg init ../converted
  $ hg --config extensions.convert= convert --config convert.hg.saverev=True  \
  >      sub ../converted/sub
  initializing destination ../converted/sub repository
  scanning source...
  sorting...
  converting...
  0 sub
  $ hg clone -U sub2 ../converted/sub2
  $ hg --config extensions.convert= convert --config convert.hg.saverev=True  \
  >      . ../converted
  scanning source...
  sorting...
  converting...
  4 addfiles
  3 manychanges
  2 diverging
  1 merge
  0 subrepo
  no ".hgsubstate" updates will be made for "sub2"
  $ hg up -q -R ../converted -r tip
  $ hg --cwd ../converted cat sub/suba sub2/b -r tip
  a
  b
  $ oldnode=`hg log -r tip -T "{node}\n"`
  $ newnode=`hg log -R ../converted -r tip -T "{node}\n"`
  $ [ "$oldnode" != "$newnode" ] || echo "nothing changed"

Test with a revision

  $ hg log -G --template '{rev} {desc}\n'
  @  4 subrepo
  |
  o    3 merge
  |\
  | o  2 diverging
  | |
  o |  1 manychanges
  |/
  o  0 addfiles
  
  $ echo unknown > unknown
  $ fileset -r1 'modified()'
  b2
  $ fileset -r1 'added() and c1'
  c1
  $ fileset -r1 'removed()'
  a2
  $ fileset -r1 'deleted()'
  $ fileset -r1 'unknown()'
  $ fileset -r1 'ignored()'
  $ fileset -r1 'hgignore()'
  b2
  bin
  $ fileset -r1 'binary()'
  bin
  $ fileset -r1 'size(1k)'
  1k
  $ fileset -r3 'resolved()'
  $ fileset -r3 'unresolved()'

#if execbit
  $ fileset -r1 'exec()'
  b2
#endif

#if symlink
  $ fileset -r1 'symlink()'
  b2link
#endif

#if no-windows
  $ fileset -r1 'not portable()'
  con.xml
  $ hg forget 'con.xml'
#endif

  $ fileset -r4 'subrepo("re:su.*")'
  sub
  sub2
  $ fileset -r4 'subrepo("sub")'
  sub
  $ fileset -r4 'b2 or c1'
  b2
  c1

  >>> open('dos', 'wb').write("dos\r\n")
  >>> open('mixed', 'wb').write("dos\r\nunix\n")
  >>> open('mac', 'wb').write("mac\r")
  $ hg add dos mixed mac

(remove a1, to examine safety of 'eol' on removed files)
  $ rm a1

  $ fileset 'eol(dos)'
  dos
  mixed
  $ fileset 'eol(unix)'
  mixed
  .hgsub
  .hgsubstate
  b1
  b2
  c1
  $ fileset 'eol(mac)'
  mac

Test safety of 'encoding' on removed files

#if symlink
  $ fileset 'encoding("ascii")'
  dos
  mac
  mixed
  .hgsub
  .hgsubstate
  1k
  2k
  b1
  b2
  b2link
  bin
  c1
#else
  $ fileset 'encoding("ascii")'
  dos
  mac
  mixed
  .hgsub
  .hgsubstate
  1k
  2k
  b1
  b2
  bin
  c1
#endif

Test detection of unintentional 'matchctx.existing()' invocation

  $ cat > $TESTTMP/existingcaller.py <<EOF
  > from mercurial import registrar
  > 
  > filesetpredicate = registrar.filesetpredicate()
  > @filesetpredicate('existingcaller()', callexisting=False)
  > def existingcaller(mctx, x):
  >     # this 'mctx.existing()' invocation is unintentional
  >     return [f for f in mctx.existing()]
  > EOF

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > existingcaller = $TESTTMP/existingcaller.py
  > EOF

  $ fileset 'existingcaller()' 2>&1 | tail -1
  AssertionError: unexpected existing() invocation

Test 'revs(...)'
================

small reminder of the repository state

  $ hg log -G
  @  changeset:   4:160936123545
  |  tag:         tip
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     subrepo
  |
  o    changeset:   3:9d594e11b8c9
  |\   parent:      2:55b05bdebf36
  | |  parent:      1:830839835f98
  | |  user:        test
  | |  date:        Thu Jan 01 00:00:00 1970 +0000
  | |  summary:     merge
  | |
  | o  changeset:   2:55b05bdebf36
  | |  parent:      0:8a9576c51c1f
  | |  user:        test
  | |  date:        Thu Jan 01 00:00:00 1970 +0000
  | |  summary:     diverging
  | |
  o |  changeset:   1:830839835f98
  |/   user:        test
  |    date:        Thu Jan 01 00:00:00 1970 +0000
  |    summary:     manychanges
  |
  o  changeset:   0:8a9576c51c1f
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     addfiles
  
  $ hg status --change 0
  A a1
  A a2
  A b1
  A b2
  $ hg status --change 1
  M b2
  A 1k
  A 2k
  A b2link
  A bin
  A c1
  A con.xml
  R a2
  $ hg status --change 2
  M b2
  $ hg status --change 3
  M b2
  A 1k
  A 2k
  A b2link
  A bin
  A c1
  A con.xml
  R a2
  $ hg status --change 4
  A .hgsub
  A .hgsubstate
  $ hg status
  A dos
  A mac
  A mixed
  R con.xml
  ! a1
  ? b2.orig
  ? c3
  ? unknown

Test files at -r0 should be filtered by files at wdir
-----------------------------------------------------

  $ fileset -r0 '* and revs("wdir()", *)'
  a1
  b1
  b2

Test that "revs()" work at all
------------------------------

  $ fileset "revs('2', modified())"
  b2

Test that "revs()" work for file missing in the working copy/current context
----------------------------------------------------------------------------

(a2 not in working copy)

  $ fileset "revs('0', added())"
  a1
  a2
  b1
  b2

(none of the file exist in "0")

  $ fileset -r 0 "revs('4', added())"
  .hgsub
  .hgsubstate

Call with empty revset
--------------------------

  $ fileset "revs('2-2', modified())"

Call with revset matching multiple revs
---------------------------------------

  $ fileset "revs('0+4', added())"
  a1
  a2
  b1
  b2
  .hgsub
  .hgsubstate

overlapping set

  $ fileset "revs('1+2', modified())"
  b2

test 'status(...)'
=================

Simple case
-----------

  $ fileset "status(3, 4, added())"
  .hgsub
  .hgsubstate

use rev to restrict matched file
-----------------------------------------

  $ hg status --removed --rev 0 --rev 1
  R a2
  $ fileset "status(0, 1, removed())"
  a2
  $ fileset "* and status(0, 1, removed())"
  $ fileset -r 4 "status(0, 1, removed())"
  a2
  $ fileset -r 4 "* and status(0, 1, removed())"
  $ fileset "revs('4', * and status(0, 1, removed()))"
  $ fileset "revs('0', * and status(0, 1, removed()))"
  a2

check wdir()
------------

  $ hg status --removed  --rev 4
  R con.xml
  $ fileset "status(4, 'wdir()', removed())"
  con.xml

  $ hg status --removed --rev 2
  R a2
  $ fileset "status('2', 'wdir()', removed())"
  a2

test backward status
--------------------

  $ hg status --removed --rev 0 --rev 4
  R a2
  $ hg status --added --rev 4 --rev 0
  A a2
  $ fileset "status(4, 0, added())"
  a2

test cross branch status
------------------------

  $ hg status --added --rev 1 --rev 2
  A a2
  $ fileset "status(1, 2, added())"
  a2

test with multi revs revset
---------------------------
  $ hg status --added --rev 0:1 --rev 3:4
  A .hgsub
  A .hgsubstate
  A 1k
  A 2k
  A b2link
  A bin
  A c1
  A con.xml
  $ fileset "status('0:1', '3:4', added())"
  .hgsub
  .hgsubstate
  1k
  2k
  b2link
  bin
  c1
  con.xml

tests with empty value
----------------------

Fully empty revset

  $ fileset "status('', '4', added())"
  hg: parse error: first argument to status must be a revision
  [255]
  $ fileset "status('2', '', added())"
  hg: parse error: second argument to status must be a revision
  [255]

Empty revset will error at the revset layer

  $ fileset "status(' ', '4', added())"
  hg: parse error at 1: not a prefix: end
  [255]
  $ fileset "status('2', ' ', added())"
  hg: parse error at 1: not a prefix: end
  [255]