tests/test-parseindex2.py

wireprotov2: move response handling out of httppeer

And fix some bugs while we're here.

The code for processing response data from the unified framing
protocol is mostly peer agnostic. The peer-specific bits are the
configuration of the client reactor and how I/O is performed. I
initially implemented things in httppeer for expediency.

This commit establishes a module for holding the peer API level
code for the framing based protocol. Inside this module we have
a class to help coordinate higher-level activities, such as managing
response object.

The client handler bits could be rolled into clientreactor. However,
I want clientreactor to be sans I/O and I want it to only be
concerned with protocol-level details, not higher-level concepts
like how protocol events are converted into peer API concepts. I
want clientreactor to receive a frame and then tell the caller what
should probably be done about it. If we start putting things like
future resolution into clientreactor, we'll constrain how the protocol
can be used (e.g. by requiring futures).

The new code is loosely based on what was in httppeer before. I
changed things a bit around response handling. We now buffer the
entire response "body" and then handle it as one atomic unit. This
fixed a bug around decoding CBOR data that spanned multiple frames.
I also fixed an off-by-one bug where we failed to read a single byte
CBOR value at the end of the stream. That's why tests have changed.

The new state of httppeer is much cleaner. It is largely agnostic
about framing protocol implementation details. That's how it should
be: the framing protocol is designed to be largely transport
agnostic. We want peers merely putting bytes on the wire and telling
the framing protocol where to read response data from.

There's still a bit of work to be done here, especially for
representing responses. But at least we're a step closer to having a
higher-level peer interface that can be plugged into the SSH peer
someday.

I initially added this class to wireprotoframing. However, we'll
eventually need version 2 specific functions to convert CBOR responses
into data structures expected by the code calling commands. This
needs to live somewhere. Since that code would be shared across peers,
we need a common module. We have wireprotov1peer for the equivalent
version 1 code. So I decided to establish wireprotov2peer.

Differential Revision: https://phab.mercurial-scm.org/D3379

"""This unit test primarily tests parsers.parse_index2().

It also checks certain aspects of the parsers module as a whole.
"""

from __future__ import absolute_import, print_function

import struct
import subprocess
import sys

from mercurial.node import (
    nullid,
    nullrev,
)
from mercurial import (
    policy,
)

parsers = policy.importmod(r'parsers')

# original python implementation
def gettype(q):
    return int(q & 0xFFFF)

def offset_type(offset, type):
    return long(long(offset) << 16 | type)

indexformatng = ">Qiiiiii20s12x"

def py_parseindex(data, inline) :
    s = 64
    cache = None
    index = []
    nodemap = {nullid: nullrev}
    n = off = 0

    l = len(data) - s
    append = index.append
    if inline:
        cache = (0, data)
        while off <= l:
            e = struct.unpack(indexformatng, data[off:off + s])
            nodemap[e[7]] = n
            append(e)
            n += 1
            if e[1] < 0:
                break
            off += e[1] + s
    else:
        while off <= l:
            e = struct.unpack(indexformatng, data[off:off + s])
            nodemap[e[7]] = n
            append(e)
            n += 1
            off += s

    e = list(index[0])
    type = gettype(e[0])
    e[0] = offset_type(0, type)
    index[0] = tuple(e)

    # add the magic null revision at -1
    index.append((0, 0, 0, -1, -1, -1, -1, nullid))

    return index, cache

data_inlined = '\x00\x01\x00\x01\x00\x00\x00\x00\x00\x00\x01\x8c' \
    '\x00\x00\x04\x07\x00\x00\x00\x00\x00\x00\x15\x15\xff\xff\xff' \
    '\xff\xff\xff\xff\xff\xebG\x97\xb7\x1fB\x04\xcf\x13V\x81\tw\x1b' \
    'w\xdduR\xda\xc6\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' \
    'x\x9c\x9d\x93?O\xc30\x10\xc5\xf7|\x8a\xdb\x9a\xa8m\x06\xd8*\x95' \
    '\x81B\xa1\xa2\xa2R\xcb\x86Pd\x9a\x0b5$vd_\x04\xfd\xf6\x9c\xff@' \
    '\x11!\x0b\xd9\xec\xf7\xbbw\xe7gG6\xad6\x04\xdaN\xc0\x92\xa0$)' \
    '\xb1\x82\xa2\xd1%\x16\xa4\x8b7\xa9\xca\xd4-\xb2Y\x02\xfc\xc9' \
    '\xcaS\xf9\xaeX\xed\xb6\xd77Q\x02\x83\xd4\x19\xf5--Y\xea\xe1W' \
    '\xab\xed\x10\xceR\x0f_\xdf\xdf\r\xe1,\xf5\xf0\xcb\xf5 \xceR\x0f' \
    '_\xdc\x0e\x0e\xc3R\x0f_\xae\x96\x9b!\x9e\xa5\x1e\xbf\xdb,\x06' \
    '\xc7q\x9a/\x88\x82\xc3B\xea\xb5\xb4TJ\x93\xb6\x82\x0e\xe16\xe6' \
    'KQ\xdb\xaf\xecG\xa3\xd1 \x01\xd3\x0b_^\xe8\xaa\xa0\xae\xad\xd1' \
    '&\xbef\x1bz\x08\xb0|\xc9Xz\x06\xf6Z\x91\x90J\xaa\x17\x90\xaa' \
    '\xd2\xa6\x11$5C\xcf\xba#\xa0\x03\x02*2\x92-\xfc\xb1\x94\xdf\xe2' \
    '\xae\xb8\'m\x8ey0^\x85\xd3\x82\xb4\xf0`:\x9c\x00\x8a\xfd\x01' \
    '\xb0\xc6\x86\x8b\xdd\xae\x80\xf3\xa9\x9fd\x16\n\x00R%\x1a\x06' \
    '\xe9\xd8b\x98\x1d\xf4\xf3+\x9bf\x01\xd8p\x1b\xf3.\xed\x9f^g\xc3' \
    '^\xd9W81T\xdb\xd5\x04sx|\xf2\xeb\xd6`%?x\xed"\x831\xbf\xf3\xdc' \
    'b\xeb%gaY\xe1\xad\x9f\xb9f\'1w\xa9\xa5a\x83s\x82J\xb98\xbc4\x8b' \
    '\x83\x00\x9f$z\xb8#\xa5\xb1\xdf\x98\xd9\xec\x1b\x89O\xe3Ts\x9a4' \
    '\x17m\x8b\xfc\x8f\xa5\x95\x9a\xfc\xfa\xed,\xe5|\xa1\xfe\x15\xb9' \
    '\xbc\xb2\x93\x1f\xf2\x95\xff\xdf,\x1a\xc5\xe7\x17*\x93Oz:>\x0e'

data_non_inlined = '\x00\x00\x00\x01\x00\x00\x00\x00\x00\x01D\x19' \
    '\x00\x07e\x12\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff' \
    '\xff\xff\xff\xff\xd1\xf4\xbb\xb0\xbe\xfc\x13\xbd\x8c\xd3\x9d' \
    '\x0f\xcd\xd9;\x8c\x07\x8cJ/\x00\x00\x00\x00\x00\x00\x00\x00\x00' \
    '\x00\x00\x00\x00\x00\x00\x01D\x19\x00\x00\x00\x00\x00\xdf\x00' \
    '\x00\x01q\x00\x00\x00\x01\x00\x00\x00\x01\x00\x00\x00\x00\xff' \
    '\xff\xff\xff\xc1\x12\xb9\x04\x96\xa4Z1t\x91\xdfsJ\x90\xf0\x9bh' \
    '\x07l&\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' \
    '\x00\x01D\xf8\x00\x00\x00\x00\x01\x1b\x00\x00\x01\xb8\x00\x00' \
    '\x00\x01\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\x02\n' \
    '\x0e\xc6&\xa1\x92\xae6\x0b\x02i\xfe-\xe5\xbao\x05\xd1\xe7\x00' \
    '\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01F' \
    '\x13\x00\x00\x00\x00\x01\xec\x00\x00\x03\x06\x00\x00\x00\x01' \
    '\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x12\xcb\xeby1' \
    '\xb6\r\x98B\xcb\x07\xbd`\x8f\x92\xd9\xc4\x84\xbdK\x00\x00\x00' \
    '\x00\x00\x00\x00\x00\x00\x00\x00\x00'

def parse_index2(data, inline):
    index, chunkcache = parsers.parse_index2(data, inline)
    return list(index), chunkcache

def importparsers(hexversion):
    """Import mercurial.parsers with the given sys.hexversion."""
    # The file parsers.c inspects sys.hexversion to determine the version
    # of the currently-running Python interpreter, so we monkey-patch
    # sys.hexversion to simulate using different versions.
    code = ("import sys; sys.hexversion=%s; "
            "import mercurial.cext.parsers" % hexversion)
    cmd = "python -c \"%s\"" % code
    # We need to do these tests inside a subprocess because parser.c's
    # version-checking code happens inside the module init function, and
    # when using reload() to reimport an extension module, "The init function
    # of extension modules is not called a second time"
    # (from http://docs.python.org/2/library/functions.html?#reload).
    p = subprocess.Popen(cmd, shell=True,
                         stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
    return p.communicate()  # returns stdout, stderr

def printhexfail(testnumber, hexversion, stdout, expected):
    try:
        hexstring = hex(hexversion)
    except TypeError:
        hexstring = None
    print("FAILED: version test #%s with Python %s and patched "
          "sys.hexversion %r (%r):\n Expected %s but got:\n-->'%s'\n" %
          (testnumber, sys.version_info, hexversion, hexstring, expected,
           stdout))

def testversionokay(testnumber, hexversion):
    stdout, stderr = importparsers(hexversion)
    if stdout:
        printhexfail(testnumber, hexversion, stdout, expected="no stdout")

def testversionfail(testnumber, hexversion):
    stdout, stderr = importparsers(hexversion)
    # We include versionerrortext to distinguish from other ImportErrors.
    errtext = "ImportError: %s" % parsers.versionerrortext
    if errtext not in stdout:
        printhexfail(testnumber, hexversion, stdout,
                     expected="stdout to contain %r" % errtext)

def makehex(major, minor, micro):
    return int("%x%02x%02x00" % (major, minor, micro), 16)

def runversiontests():
    """Check the version-detection logic when importing parsers."""
    info = sys.version_info
    major, minor, micro = info[0], info[1], info[2]
    # Test same major-minor versions.
    testversionokay(1, makehex(major, minor, micro))
    testversionokay(2, makehex(major, minor, micro + 1))
    # Test different major-minor versions.
    testversionfail(3, makehex(major + 1, minor, micro))
    testversionfail(4, makehex(major, minor + 1, micro))
    testversionfail(5, "'foo'")

def runtest() :
    # Only test the version-detection logic if it is present.
    try:
        parsers.versionerrortext
    except AttributeError:
        pass
    else:
        runversiontests()

    # Check that parse_index2() raises TypeError on bad arguments.
    try:
        parse_index2(0, True)
    except TypeError:
        pass
    else:
        print("Expected to get TypeError.")

   # Check parsers.parse_index2() on an index file against the original
   # Python implementation of parseindex, both with and without inlined data.

    py_res_1 = py_parseindex(data_inlined, True)
    c_res_1 = parse_index2(data_inlined, True)

    py_res_2 = py_parseindex(data_non_inlined, False)
    c_res_2 = parse_index2(data_non_inlined, False)

    if py_res_1 != c_res_1:
        print("Parse index result (with inlined data) differs!")

    if py_res_2 != c_res_2:
        print("Parse index result (no inlined data) differs!")

    ix = parsers.parse_index2(data_inlined, True)[0]
    for i, r in enumerate(ix):
        if r[7] == nullid:
            i = -1
        try:
            if ix[r[7]] != i:
                print('Reverse lookup inconsistent for %r'
                    % r[7].encode('hex'))
        except TypeError:
            # pure version doesn't support this
            break

    print("done")

runtest()