annotate tests/test-batching.py @ 48598:a6f16ec07ed7

stream-clone: add a explicit test for format change during stream clone

They are different kind of requirements, the one which impact the data storage
and are relevant to the files being streamed and the one which does not. For
example some requirements are only relevant to the working copy, like sparse, or
dirstate-v2.

Since they are irrelevant to the content being streamed, they do not prevent the
receiving side to use streaming clone and mercurial skip adverting them over
the wire and, ideally, within the bundle.

In addition, this let the client decide to use whichever format it desire for
the part that does not affect the store itself. So the configuration related to
these format are used as normal when doing a streaming clone.

In practice, the feature was not really tested and is badly broken with bundle-2,
since the requirements are not filtered out from the stream bundle.

So we start with adding simple tests as a good base before the fix and adjust
the feature.

Differential Revision: https://phab.mercurial-scm.org/D12029

# test-batching.py - tests for transparent command batching
#
# Copyright 2011 Peter Arrenbrecht <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import, print_function

import contextlib

from mercurial import (
    localrepo,
    pycompat,
    wireprotov1peer,
)


def bprint(*bs):
    print(*[pycompat.sysstr(b) for b in bs])


# equivalent of repo.repository
class thing(object):
    def hello(self):
        return b"Ready."


# equivalent of localrepo.localrepository
class localthing(thing):
    def foo(self, one, two=None):
        if one:
            return b"%s and %s" % (
                one,
                two,
            )
        return b"Nope"

    def bar(self, b, a):
        return b"%s und %s" % (
            b,
            a,
        )

    def greet(self, name=None):
        return b"Hello, %s" % name

    @contextlib.contextmanager
    def commandexecutor(self):
        e = localrepo.localcommandexecutor(self)
        try:
            yield e
        finally:
            e.close()


# usage of "thing" interface
def use(it):

    # Direct call to base method shared between client and server.
    bprint(it.hello())

    # Direct calls to proxied methods. They cause individual roundtrips.
    bprint(it.foo(b"Un", two=b"Deux"))
    bprint(it.bar(b"Eins", b"Zwei"))

    # Batched call to a couple of proxied methods.

    with it.commandexecutor() as e:
        ffoo = e.callcommand(b'foo', {b'one': b'One', b'two': b'Two'})
        fbar = e.callcommand(b'bar', {b'b': b'Eins', b'a': b'Zwei'})
        fbar2 = e.callcommand(b'bar', {b'b': b'Uno', b'a': b'Due'})

    bprint(ffoo.result())
    bprint(fbar.result())
    bprint(fbar2.result())


# local usage
mylocal = localthing()
print()
bprint(b"== Local")
use(mylocal)

# demo remoting; mimicks what wireproto and HTTP/SSH do

# shared


def escapearg(plain):
    return (
        plain.replace(b':', b'::')
        .replace(b',', b':,')
        .replace(b';', b':;')
        .replace(b'=', b':=')
    )


def unescapearg(escaped):
    return (
        escaped.replace(b':=', b'=')
        .replace(b':;', b';')
        .replace(b':,', b',')
        .replace(b'::', b':')
    )


# server side

# equivalent of wireproto's global functions
class server(object):
    def __init__(self, local):
        self.local = local

    def _call(self, name, args):
        args = dict(arg.split(b'=', 1) for arg in args)
        return getattr(self, name)(**args)

    def perform(self, req):
        bprint(b"REQ:", req)
        name, args = req.split(b'?', 1)
        args = args.split(b'&')
        vals = dict(arg.split(b'=', 1) for arg in args)
        res = getattr(self, pycompat.sysstr(name))(**pycompat.strkwargs(vals))
        bprint(b"  ->", res)
        return res

    def batch(self, cmds):
        res = []
        for pair in cmds.split(b';'):
            name, args = pair.split(b':', 1)
            vals = {}
            for a in args.split(b','):
                if a:
                    n, v = a.split(b'=')
                    vals[n] = unescapearg(v)
            res.append(
                escapearg(
                    getattr(self, pycompat.sysstr(name))(
                        **pycompat.strkwargs(vals)
                    )
                )
            )
        return b';'.join(res)

    def foo(self, one, two):
        return mangle(self.local.foo(unmangle(one), unmangle(two)))

    def bar(self, b, a):
        return mangle(self.local.bar(unmangle(b), unmangle(a)))

    def greet(self, name):
        return mangle(self.local.greet(unmangle(name)))


myserver = server(mylocal)

# local side

# equivalent of wireproto.encode/decodelist, that is, type-specific marshalling
# here we just transform the strings a bit to check we're properly en-/decoding
def mangle(s):
    return b''.join(pycompat.bytechr(ord(c) + 1) for c in pycompat.bytestr(s))


def unmangle(s):
    return b''.join(pycompat.bytechr(ord(c) - 1) for c in pycompat.bytestr(s))


# equivalent of wireproto.wirerepository and something like http's wire format
class remotething(thing):
    def __init__(self, server):
        self.server = server

    def _submitone(self, name, args):
        req = name + b'?' + b'&'.join([b'%s=%s' % (n, v) for n, v in args])
        return self.server.perform(req)

    def _submitbatch(self, cmds):
        req = []
        for name, args in cmds:
            args = b','.join(n + b'=' + escapearg(v) for n, v in args)
            req.append(name + b':' + args)
        req = b';'.join(req)
        res = self._submitone(
            b'batch',
            [
                (
                    b'cmds',
                    req,
                )
            ],
        )
        for r in res.split(b';'):
            yield r

    @contextlib.contextmanager
    def commandexecutor(self):
        e = wireprotov1peer.peerexecutor(self)
        try:
            yield e
        finally:
            e.close()

    @wireprotov1peer.batchable
    def foo(self, one, two=None):
        encoded_args = [
            (
                b'one',
                mangle(one),
            ),
            (
                b'two',
                mangle(two),
            ),
        ]
        return encoded_args, unmangle

    @wireprotov1peer.batchable
    def bar(self, b, a):
        return [
            (
                b'b',
                mangle(b),
            ),
            (
                b'a',
                mangle(a),
            ),
        ], unmangle

    # greet is coded directly. It therefore does not support batching. If it
    # does appear in a batch, the batch is split around greet, and the call to
    # greet is done in its own roundtrip.
    def greet(self, name=None):
        return unmangle(
            self._submitone(
                b'greet',
                [
                    (
                        b'name',
                        mangle(name),
                    )
                ],
            )
        )


# demo remote usage

myproxy = remotething(myserver)
print()
bprint(b"== Remote")
use(myproxy)