annotate mercurial/exthelper.py @ 41247:a89b20a49c13

rust-cpython: using MissingAncestors from Python code

As precedently done with LazyAncestors on cpython.rs, we test for the
presence of the 'rustext' module.

incrementalmissingrevs() has two callers within the Mercurial core:
`setdiscovery.partialdiscovery` and the `only()` revset.

This move shows a significant discovery performance improvement
in cases where the baseline is slow: using perfdiscovery on the PyPy
repos, prepared with `contrib/discovery-helper <repo> 50 100`, we
get averaged medians of 403ms with the Rust version vs 742ms without
(about 45% better).

But there are still indications that performance can be worse in cases
the baseline is fast, possibly due to the conversion from Python to
Rust and back becoming the bottleneck. We could measure this on
mozilla-central in cases were the delta is just a few changesets.
This requires confirmation, but if that's the reason, then an
upcoming `partialdiscovery` fully in Rust should solve the problem.

Differential Revision: https://phab.mercurial-scm.org/D5551

# Copyright 2012 Logilab SA        <[e-mail]>
#                Pierre-Yves David <[e-mail]>
#                Octobus <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

#####################################################################
### Extension helper                                              ###
#####################################################################

from __future__ import absolute_import

from . import (
    commands,
    error,
    extensions,
    registrar,
)

class exthelper(object):
    """Helper for modular extension setup

    A single helper should be instantiated for each module of an
    extension, where a command or function needs to be wrapped, or a
    command, extension hook, fileset, revset or template needs to be
    registered.  Helper methods are then used as decorators for
    these various purposes.  If an extension spans multiple modules,
    all helper instances should be merged in the main module.

    All decorators return the original function and may be chained.

    Aside from the helper functions with examples below, several
    registrar method aliases are available for adding commands,
    configitems, filesets, revsets, and templates.  Simply decorate
    the appropriate methods, and assign the corresponding exthelper
    variable to a module level variable of the extension.  The
    extension loading mechanism will handle the rest.

    example::

        # ext.py
        eh = exthelper.exthelper()

        # As needed:
        cmdtable = eh.cmdtable
        configtable = eh.configtable
        filesetpredicate = eh.filesetpredicate
        revsetpredicate = eh.revsetpredicate
        templatekeyword = eh.templatekeyword

        @eh.command('mynewcommand',
            [('r', 'rev', [], _('operate on these revisions'))],
            _('-r REV...'),
            helpcategory=command.CATEGORY_XXX)
        def newcommand(ui, repo, *revs, **opts):
            # implementation goes here

        eh.configitem('experimental', 'foo',
            default=False,
        )

        @eh.filesetpredicate('lfs()')
        def filesetbabar(mctx, x):
            return mctx.predicate(...)

        @eh.revsetpredicate('hidden')
        def revsetbabar(repo, subset, x):
            args = revset.getargs(x, 0, 0, 'babar accept no argument')
            return [r for r in subset if 'babar' in repo[r].description()]

        @eh.templatekeyword('babar')
        def kwbabar(ctx):
            return 'babar'
    """

    def __init__(self):
        self._uipopulatecallables = []
        self._uicallables = []
        self._extcallables = []
        self._repocallables = []
        self._commandwrappers = []
        self._extcommandwrappers = []
        self._functionwrappers = []
        self._duckpunchers = []
        self.cmdtable = {}
        self.command = registrar.command(self.cmdtable)
        self.configtable = {}
        self.configitem = registrar.configitem(self.configtable)
        self.filesetpredicate = registrar.filesetpredicate()
        self.revsetpredicate = registrar.revsetpredicate()
        self.templatekeyword = registrar.templatekeyword()

    def merge(self, other):
        self._uicallables.extend(other._uicallables)
        self._uipopulatecallables.extend(other._uipopulatecallables)
        self._extcallables.extend(other._extcallables)
        self._repocallables.extend(other._repocallables)
        self.filesetpredicate._merge(other.filesetpredicate)
        self.revsetpredicate._merge(other.revsetpredicate)
        self.templatekeyword._merge(other.templatekeyword)
        self._commandwrappers.extend(other._commandwrappers)
        self._extcommandwrappers.extend(other._extcommandwrappers)
        self._functionwrappers.extend(other._functionwrappers)
        self._duckpunchers.extend(other._duckpunchers)
        self.cmdtable.update(other.cmdtable)
        for section, items in other.configtable.iteritems():
            if section in self.configtable:
                self.configtable[section].update(items)
            else:
                self.configtable[section] = items

    def finaluisetup(self, ui):
        """Method to be used as the extension uisetup

        The following operations belong here:

        - Changes to ui.__class__ . The ui object that will be used to run the
          command has not yet been created. Changes made here will affect ui
          objects created after this, and in particular the ui that will be
          passed to runcommand
        - Command wraps (extensions.wrapcommand)
        - Changes that need to be visible to other extensions: because
          initialization occurs in phases (all extensions run uisetup, then all
          run extsetup), a change made here will be visible to other extensions
          during extsetup
        - Monkeypatch or wrap function (extensions.wrapfunction) of dispatch
          module members
        - Setup of pre-* and post-* hooks
        - pushkey setup
        """
        for cont, funcname, func in self._duckpunchers:
            setattr(cont, funcname, func)
        for command, wrapper, opts in self._commandwrappers:
            entry = extensions.wrapcommand(commands.table, command, wrapper)
            if opts:
                for opt in opts:
                    entry[1].append(opt)
        for cont, funcname, wrapper in self._functionwrappers:
            extensions.wrapfunction(cont, funcname, wrapper)
        for c in self._uicallables:
            c(ui)

    def finaluipopulate(self, ui):
        """Method to be used as the extension uipopulate

        This is called once per ui instance to:

        - Set up additional ui members
        - Update configuration by ``ui.setconfig()``
        - Extend the class dynamically
        """
        for c in self._uipopulatecallables:
            c(ui)

    def finalextsetup(self, ui):
        """Method to be used as a the extension extsetup

        The following operations belong here:

        - Changes depending on the status of other extensions. (if
          extensions.find('mq'))
        - Add a global option to all commands
        """
        knownexts = {}

        for ext, command, wrapper, opts in self._extcommandwrappers:
            if ext not in knownexts:
                try:
                    e = extensions.find(ext)
                except KeyError:
                    # Extension isn't enabled, so don't bother trying to wrap
                    # it.
                    continue
                knownexts[ext] = e.cmdtable
            entry = extensions.wrapcommand(knownexts[ext], command, wrapper)
            if opts:
                for opt in opts:
                    entry[1].append(opt)

        for c in self._extcallables:
            c(ui)

    def finalreposetup(self, ui, repo):
        """Method to be used as the extension reposetup

        The following operations belong here:

        - All hooks but pre-* and post-*
        - Modify configuration variables
        - Changes to repo.__class__, repo.dirstate.__class__
        """
        for c in self._repocallables:
            c(ui, repo)

    def uisetup(self, call):
        """Decorated function will be executed during uisetup

        example::

            @eh.uisetup
            def setupbabar(ui):
                print 'this is uisetup!'
        """
        self._uicallables.append(call)
        return call

    def uipopulate(self, call):
        """Decorated function will be executed during uipopulate

        example::

            @eh.uipopulate
            def setupfoo(ui):
                print 'this is uipopulate!'
        """
        self._uipopulatecallables.append(call)
        return call

    def extsetup(self, call):
        """Decorated function will be executed during extsetup

        example::

            @eh.extsetup
            def setupcelestine(ui):
                print 'this is extsetup!'
        """
        self._extcallables.append(call)
        return call

    def reposetup(self, call):
        """Decorated function will be executed during reposetup

        example::

            @eh.reposetup
            def setupzephir(ui, repo):
                print 'this is reposetup!'
        """
        self._repocallables.append(call)
        return call

    def wrapcommand(self, command, extension=None, opts=None):
        """Decorated function is a command wrapper

        The name of the command must be given as the decorator argument.
        The wrapping is installed during `uisetup`.

        If the second option `extension` argument is provided, the wrapping
        will be applied in the extension commandtable. This argument must be a
        string that will be searched using `extension.find` if not found and
        Abort error is raised. If the wrapping applies to an extension, it is
        installed during `extsetup`.

        example::

            @eh.wrapcommand('summary')
            def wrapsummary(orig, ui, repo, *args, **kwargs):
                ui.note('Barry!')
                return orig(ui, repo, *args, **kwargs)

        The `opts` argument allows specifying a list of tuples for additional
        arguments for the command.  See ``mercurial.fancyopts.fancyopts()`` for
        the format of the tuple.

        """
        if opts is None:
            opts = []
        else:
            for opt in opts:
                if not isinstance(opt, tuple):
                    raise error.ProgrammingError('opts must be list of tuples')
                if len(opt) not in (4, 5):
                    msg = 'each opt tuple must contain 4 or 5 values'
                    raise error.ProgrammingError(msg)

        def dec(wrapper):
            if extension is None:
                self._commandwrappers.append((command, wrapper, opts))
            else:
                self._extcommandwrappers.append((extension, command, wrapper,
                                                 opts))
            return wrapper
        return dec

    def wrapfunction(self, container, funcname):
        """Decorated function is a function wrapper

        This function takes two arguments, the container and the name of the
        function to wrap. The wrapping is performed during `uisetup`.
        (there is no extension support)

        example::

            @eh.function(discovery, 'checkheads')
            def wrapfunction(orig, *args, **kwargs):
                ui.note('His head smashed in and his heart cut out')
                return orig(*args, **kwargs)
        """
        def dec(wrapper):
            self._functionwrappers.append((container, funcname, wrapper))
            return wrapper
        return dec

    def addattr(self, container, funcname):
        """Decorated function is to be added to the container

        This function takes two arguments, the container and the name of the
        function to wrap. The wrapping is performed during `uisetup`.

        Adding attributes to a container like this is discouraged, because the
        container modification is visible even in repositories that do not
        have the extension loaded.  Therefore, care must be taken that the
        function doesn't make assumptions that the extension was loaded for the
        current repository.  For `ui` and `repo` instances, a better option is
        to subclass the instance in `uipopulate` and `reposetup` respectively.

        https://www.mercurial-scm.org/wiki/WritingExtensions

        example::

            @eh.addattr(context.changectx, 'babar')
            def babar(ctx):
                return 'babar' in ctx.description
        """
        def dec(func):
            self._duckpunchers.append((container, funcname, func))
            return func
        return dec