annotate tests/test-import-eol.t @ 41247:a89b20a49c13

rust-cpython: using MissingAncestors from Python code

As precedently done with LazyAncestors on cpython.rs, we test for the
presence of the 'rustext' module.

incrementalmissingrevs() has two callers within the Mercurial core:
`setdiscovery.partialdiscovery` and the `only()` revset.

This move shows a significant discovery performance improvement
in cases where the baseline is slow: using perfdiscovery on the PyPy
repos, prepared with `contrib/discovery-helper <repo> 50 100`, we
get averaged medians of 403ms with the Rust version vs 742ms without
(about 45% better).

But there are still indications that performance can be worse in cases
the baseline is fast, possibly due to the conversion from Python to
Rust and back becoming the bottleneck. We could measure this on
mozilla-central in cases were the delta is just a few changesets.
This requires confirmation, but if that's the reason, then an
upcoming `partialdiscovery` fully in Rust should solve the problem.

Differential Revision: https://phab.mercurial-scm.org/D5551

  $ cat > makepatch.py <<EOF
  > import sys
  > f = open(sys.argv[2], 'wb')
  > w = f.write
  > w(b'test message\n')
  > w(b'diff --git a/a b/a\n')
  > w(b'--- a/a\n')
  > w(b'+++ b/a\n')
  > w(b'@@ -1,5 +1,5 @@\n')
  > w(b' a\n')
  > w(b'-bbb\r\n')
  > w(b'+yyyy\r\n')
  > w(b' cc\r\n')
  > w({'empty:lf': b' \n',
  >    'empty:crlf': b' \r\n',
  >    'empty:stripped-lf': b'\n',
  >    'empty:stripped-crlf': b'\r\n'}[sys.argv[1]])
  > w(b' d\n')
  > w(b'-e\n')
  > w(b'\ No newline at end of file\n')
  > w(b'+z\r\n')
  > w(b'\ No newline at end of file\r\n')
  > EOF

  $ hg init repo
  $ cd repo
  $ echo '\.diff' > .hgignore


Test different --eol values

  $ "$PYTHON" -c 'open("a", "wb").write(b"a\nbbb\ncc\n\nd\ne")'
  $ hg ci -Am adda
  adding .hgignore
  adding a
  $ "$PYTHON" ../makepatch.py empty:lf eol.diff
  $ "$PYTHON" ../makepatch.py empty:crlf eol-empty-crlf.diff
  $ "$PYTHON" ../makepatch.py empty:stripped-lf eol-empty-stripped-lf.diff
  $ "$PYTHON" ../makepatch.py empty:stripped-crlf eol-empty-stripped-crlf.diff

invalid eol

  $ hg --config patch.eol='LFCR' import eol.diff
  applying eol.diff
  abort: unsupported line endings type: LFCR
  [255]
  $ hg revert -a


force LF

  $ hg --traceback --config patch.eol='LF' import eol.diff
  applying eol.diff
  $ hg id
  9e4ef7b3d4af tip
  $ cat a
  a
  yyyy
  cc
  
  d
  e (no-eol)
  $ hg st

 (test empty-line variants: all of them should generate the same revision)

  $ hg up -qC 0
  $ hg --config patch.eol='LF' import eol-empty-crlf.diff
  applying eol-empty-crlf.diff
  $ hg id
  9e4ef7b3d4af tip

  $ hg up -qC 0
  $ hg --config patch.eol='LF' import eol-empty-stripped-lf.diff
  applying eol-empty-stripped-lf.diff
  $ hg id
  9e4ef7b3d4af tip

  $ hg up -qC 0
  $ hg --config patch.eol='LF' import eol-empty-stripped-crlf.diff
  applying eol-empty-stripped-crlf.diff
  $ hg id
  9e4ef7b3d4af tip

force CRLF

  $ hg up -C 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg --traceback --config patch.eol='CRLF' import eol.diff
  applying eol.diff
  $ cat a
  a\r (esc)
  yyyy\r (esc)
  cc\r (esc)
  \r (esc)
  d\r (esc)
  e (no-eol)
  $ hg st


auto EOL on LF file

  $ hg up -C 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg --traceback --config patch.eol='auto' import eol.diff
  applying eol.diff
  $ cat a
  a
  yyyy
  cc
  
  d
  e (no-eol)
  $ hg st


auto EOL on CRLF file

  $ "$PYTHON" -c 'open("a", "wb").write(b"a\r\nbbb\r\ncc\r\n\r\nd\r\ne")'
  $ hg commit -m 'switch EOLs in a'
  $ hg --traceback --config patch.eol='auto' import eol.diff
  applying eol.diff
  $ cat a
  a\r (esc)
  yyyy\r (esc)
  cc\r (esc)
  \r (esc)
  d\r (esc)
  e (no-eol)
  $ hg st


auto EOL on new file or source without any EOL

  $ "$PYTHON" -c 'open("noeol", "wb").write(b"noeol")'
  $ hg add noeol
  $ hg commit -m 'add noeol'
  $ "$PYTHON" -c 'open("noeol", "wb").write(b"noeol\r\nnoeol\n")'
  $ "$PYTHON" -c 'open("neweol", "wb").write(b"neweol\nneweol\r\n")'
  $ hg add neweol
  $ hg diff --git > noeol.diff
  $ hg revert --no-backup noeol neweol
  $ rm neweol
  $ hg --traceback --config patch.eol='auto' import -m noeol noeol.diff
  applying noeol.diff
  $ cat noeol
  noeol\r (esc)
  noeol
  $ cat neweol
  neweol
  neweol\r (esc)
  $ hg st


Test --eol and binary patches

  $ "$PYTHON" -c 'open("b", "wb").write(b"a\x00\nb\r\nd")'
  $ hg ci -Am addb
  adding b
  $ "$PYTHON" -c 'open("b", "wb").write(b"a\x00\nc\r\nd")'
  $ hg diff --git > bin.diff
  $ hg revert --no-backup b

binary patch with --eol

  $ hg import --config patch.eol='CRLF' -m changeb bin.diff
  applying bin.diff
  $ cat b
  a\x00 (esc)
  c\r (esc)
  d (no-eol)
  $ hg st
  $ cd ..