annotate tests/test-setdiscovery.t @ 41247:a89b20a49c13

rust-cpython: using MissingAncestors from Python code

As precedently done with LazyAncestors on cpython.rs, we test for the
presence of the 'rustext' module.

incrementalmissingrevs() has two callers within the Mercurial core:
`setdiscovery.partialdiscovery` and the `only()` revset.

This move shows a significant discovery performance improvement
in cases where the baseline is slow: using perfdiscovery on the PyPy
repos, prepared with `contrib/discovery-helper <repo> 50 100`, we
get averaged medians of 403ms with the Rust version vs 742ms without
(about 45% better).

But there are still indications that performance can be worse in cases
the baseline is fast, possibly due to the conversion from Python to
Rust and back becoming the bottleneck. We could measure this on
mozilla-central in cases were the delta is just a few changesets.
This requires confirmation, but if that's the reason, then an
upcoming `partialdiscovery` fully in Rust should solve the problem.

Differential Revision: https://phab.mercurial-scm.org/D5551

Function to test discovery between two repos in both directions, using both the local shortcut
(which is currently not activated by default) and the full remotable protocol:

  $ testdesc() { # revs_a, revs_b, dagdesc
  >     if [ -d foo ]; then rm -rf foo; fi
  >     hg init foo
  >     cd foo
  >     hg debugbuilddag "$3"
  >     hg clone . a $1 --quiet
  >     hg clone . b $2 --quiet
  >     echo
  >     echo "% -- a -> b tree"
  >     hg -R a debugdiscovery b --verbose --old
  >     echo
  >     echo "% -- a -> b set"
  >     hg -R a debugdiscovery b --verbose --debug --config progress.debug=true
  >     echo
  >     echo "% -- a -> b set (tip only)"
  >     hg -R a debugdiscovery b --verbose --debug --config progress.debug=true --rev tip
  >     echo
  >     echo "% -- b -> a tree"
  >     hg -R b debugdiscovery a --verbose --old
  >     echo
  >     echo "% -- b -> a set"
  >     hg -R b debugdiscovery a --verbose --debug --config progress.debug=true
  >     echo
  >     echo "% -- b -> a set (tip only)"
  >     hg -R b debugdiscovery a --verbose --debug --config progress.debug=true --rev tip
  >     cd ..
  > }


Small superset:

  $ testdesc '-ra1 -ra2' '-rb1 -rb2 -rb3' '
  > +2:f +1:a1:b1
  > <f +4 :a2
  > +5 :b2
  > <f +3 :b3'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: 01241442b3c2 66f7d451a68b b5714e113bc0
  common heads: 01241442b3c2 b5714e113bc0
  local is subset
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  all local heads known remotely
  common heads: 01241442b3c2 b5714e113bc0
  local is subset
  
  % -- a -> b set (tip only)
  comparing with b
  query 1; heads
  searching for changes
  all local heads known remotely
  common heads: b5714e113bc0
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 01241442b3c2 b5714e113bc0
  common heads: 01241442b3c2 b5714e113bc0
  remote is subset
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  all remote heads known locally
  common heads: 01241442b3c2 b5714e113bc0
  remote is subset
  
  % -- b -> a set (tip only)
  comparing with a
  query 1; heads
  searching for changes
  all remote heads known locally
  common heads: 01241442b3c2 b5714e113bc0
  remote is subset


Many new:

  $ testdesc '-ra1 -ra2' '-rb' '
  > +2:f +3:a1 +3:b
  > <f +30 :a2'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: bebd167eb94d
  common heads: bebd167eb94d
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  taking initial sample
  searching: 2 queries
  query 2; still undecided: 29, sample size is: 29
  2 total queries in *.????s (glob)
  common heads: bebd167eb94d
  
  % -- a -> b set (tip only)
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 31, sample size is: 31
  2 total queries in *.????s (glob)
  common heads: 66f7d451a68b
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 66f7d451a68b bebd167eb94d
  common heads: bebd167eb94d
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  taking initial sample
  searching: 2 queries
  query 2; still undecided: 2, sample size is: 2
  2 total queries in *.????s (glob)
  common heads: bebd167eb94d
  
  % -- b -> a set (tip only)
  comparing with a
  query 1; heads
  searching for changes
  taking initial sample
  searching: 2 queries
  query 2; still undecided: 2, sample size is: 2
  2 total queries in *.????s (glob)
  common heads: bebd167eb94d

Both sides many new with stub:

  $ testdesc '-ra1 -ra2' '-rb' '
  > +2:f +2:a1 +30 :b
  > <f +30 :a2'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: 2dc09a01254d
  common heads: 2dc09a01254d
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  taking initial sample
  searching: 2 queries
  query 2; still undecided: 29, sample size is: 29
  2 total queries in *.????s (glob)
  common heads: 2dc09a01254d
  
  % -- a -> b set (tip only)
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 31, sample size is: 31
  2 total queries in *.????s (glob)
  common heads: 66f7d451a68b
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 2dc09a01254d 66f7d451a68b
  common heads: 2dc09a01254d
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  taking initial sample
  searching: 2 queries
  query 2; still undecided: 29, sample size is: 29
  2 total queries in *.????s (glob)
  common heads: 2dc09a01254d
  
  % -- b -> a set (tip only)
  comparing with a
  query 1; heads
  searching for changes
  taking initial sample
  searching: 2 queries
  query 2; still undecided: 29, sample size is: 29
  2 total queries in *.????s (glob)
  common heads: 2dc09a01254d


Both many new:

  $ testdesc '-ra' '-rb' '
  > +2:f +30 :b
  > <f +30 :a'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: 66f7d451a68b
  common heads: 66f7d451a68b
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 31, sample size is: 31
  2 total queries in *.????s (glob)
  common heads: 66f7d451a68b
  
  % -- a -> b set (tip only)
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 31, sample size is: 31
  2 total queries in *.????s (glob)
  common heads: 66f7d451a68b
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 66f7d451a68b
  common heads: 66f7d451a68b
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 31, sample size is: 31
  2 total queries in *.????s (glob)
  common heads: 66f7d451a68b
  
  % -- b -> a set (tip only)
  comparing with a
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 31, sample size is: 31
  2 total queries in *.????s (glob)
  common heads: 66f7d451a68b


Both many new skewed:

  $ testdesc '-ra' '-rb' '
  > +2:f +30 :b
  > <f +50 :a'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: 66f7d451a68b
  common heads: 66f7d451a68b
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 51, sample size is: 51
  2 total queries in *.????s (glob)
  common heads: 66f7d451a68b
  
  % -- a -> b set (tip only)
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 51, sample size is: 51
  2 total queries in *.????s (glob)
  common heads: 66f7d451a68b
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 66f7d451a68b
  common heads: 66f7d451a68b
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 31, sample size is: 31
  2 total queries in *.????s (glob)
  common heads: 66f7d451a68b
  
  % -- b -> a set (tip only)
  comparing with a
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 31, sample size is: 31
  2 total queries in *.????s (glob)
  common heads: 66f7d451a68b


Both many new on top of long history:

  $ testdesc '-ra' '-rb' '
  > +1000:f +30 :b
  > <f +50 :a'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: 7ead0cba2838
  common heads: 7ead0cba2838
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 1049, sample size is: 11
  sampling from both directions
  searching: 3 queries
  query 3; still undecided: 31, sample size is: 31
  3 total queries in *.????s (glob)
  common heads: 7ead0cba2838
  
  % -- a -> b set (tip only)
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 1049, sample size is: 11
  sampling from both directions
  searching: 3 queries
  query 3; still undecided: 31, sample size is: 31
  3 total queries in *.????s (glob)
  common heads: 7ead0cba2838
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 7ead0cba2838
  common heads: 7ead0cba2838
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 1029, sample size is: 11
  sampling from both directions
  searching: 3 queries
  query 3; still undecided: 15, sample size is: 15
  3 total queries in *.????s (glob)
  common heads: 7ead0cba2838
  
  % -- b -> a set (tip only)
  comparing with a
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 1029, sample size is: 11
  sampling from both directions
  searching: 3 queries
  query 3; still undecided: 15, sample size is: 15
  3 total queries in *.????s (glob)
  common heads: 7ead0cba2838


One with >200 heads, which used to use up all of the sample:

  $ hg init manyheads
  $ cd manyheads
  $ echo "+300:r @a" >dagdesc
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "@b *r+3" >>dagdesc # one more head
  $ hg debugbuilddag <dagdesc
  reading DAG from stdin

  $ hg heads -t --template . | wc -c
  \s*261 (re)

  $ hg clone -b a . a
  adding changesets
  adding manifests
  adding file changes
  added 1340 changesets with 0 changes to 0 files (+259 heads)
  new changesets 1ea73414a91b:1c51e2c80832
  updating to branch a
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone -b b . b
  adding changesets
  adding manifests
  adding file changes
  added 304 changesets with 0 changes to 0 files
  new changesets 1ea73414a91b:513314ca8b3a
  updating to branch b
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg -R a debugdiscovery b --debug --verbose --config progress.debug=true
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 1240, sample size is: 100
  sampling from both directions
  searching: 3 queries
  query 3; still undecided: 1140, sample size is: 200
  sampling from both directions
  searching: 4 queries
  query 4; still undecided: \d+, sample size is: 200 (re)
  sampling from both directions
  searching: 5 queries
  query 5; still undecided: \d+, sample size is: 200 (re)
  sampling from both directions
  searching: 6 queries
  query 6; still undecided: \d+, sample size is: \d+ (re)
  6 total queries in *.????s (glob)
  common heads: 3ee37d65064a
  $ hg -R a debugdiscovery b --debug --verbose --config progress.debug=true --rev tip
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 303, sample size is: 9
  sampling from both directions
  searching: 3 queries
  query 3; still undecided: 3, sample size is: 3
  3 total queries in *.????s (glob)
  common heads: 3ee37d65064a

Test actual protocol when pulling one new head in addition to common heads

  $ hg clone -U b c
  $ hg -R c id -ir tip
  513314ca8b3a
  $ hg -R c up -qr default
  $ touch c/f
  $ hg -R c ci -Aqm "extra head"
  $ hg -R c id -i
  e64a39e7da8b

  $ hg serve -R c -p $HGPORT -d --pid-file=hg.pid -A access.log -E errors.log
  $ cat hg.pid >> $DAEMON_PIDS

  $ hg -R b incoming http://localhost:$HGPORT/ -T '{node|short}\n'
  comparing with http://localhost:$HGPORT/
  searching for changes
  e64a39e7da8b

  $ killdaemons.py
  $ cut -d' ' -f6- access.log | grep -v cmd=known # cmd=known uses random sampling
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D513314ca8b3ae4dac8eec56966265b00fcf866db x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:$USUAL_BUNDLE_CAPS$&cg=1&common=513314ca8b3ae4dac8eec56966265b00fcf866db&heads=e64a39e7da8b0d54bc63e81169aff001c13b3477 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  $ cat errors.log

  $ cd ..


Issue 4438 - test coverage for 3ef893520a85 issues.

  $ mkdir issue4438
  $ cd issue4438
#if false
generate new bundles:
  $ hg init r1
  $ for i in `"$PYTHON" $TESTDIR/seq.py 101`; do hg -R r1 up -qr null && hg -R r1 branch -q b$i && hg -R r1 ci -qmb$i; done
  $ hg clone -q r1 r2
  $ for i in `"$PYTHON" $TESTDIR/seq.py 10`; do hg -R r1 up -qr null && hg -R r1 branch -q c$i && hg -R r1 ci -qmc$i; done
  $ hg -R r2 branch -q r2change && hg -R r2 ci -qmr2change
  $ hg -R r1 bundle -qa $TESTDIR/bundles/issue4438-r1.hg
  $ hg -R r2 bundle -qa $TESTDIR/bundles/issue4438-r2.hg
#else
use existing bundles:
  $ hg init r1
  $ hg -R r1 -q unbundle $TESTDIR/bundles/issue4438-r1.hg
  $ hg -R r1 -q up
  $ hg init r2
  $ hg -R r2 -q unbundle $TESTDIR/bundles/issue4438-r2.hg
  $ hg -R r2 -q up
#endif

Set iteration order could cause wrong and unstable results - fixed in 73cfaa348650:

  $ hg -R r1 outgoing r2 -T'{rev} '
  comparing with r2
  searching for changes
  101 102 103 104 105 106 107 108 109 110  (no-eol)

The case where all the 'initialsamplesize' samples already were common would
give 'all remote heads known locally' without checking the remaining heads -
fixed in 86c35b7ae300:

  $ cat >> $TESTTMP/unrandomsample.py << EOF
  > import random
  > def sample(population, k):
  >     return sorted(population)[:k]
  > random.sample = sample
  > EOF

  $ cat >> r1/.hg/hgrc << EOF
  > [extensions]
  > unrandomsample = $TESTTMP/unrandomsample.py
  > EOF

  $ hg -R r1 outgoing r2 -T'{rev} ' --config extensions.blackbox= \
  > --config blackbox.track='command commandfinish discovery'
  comparing with r2
  searching for changes
  101 102 103 104 105 106 107 108 109 110  (no-eol)
  $ hg -R r1 --config extensions.blackbox= blackbox --config blackbox.track=
  * @5d0b986a083e0d91f116de4691e2aaa54d5bbec0 (*)> serve --cmdserver chgunix * (glob) (chg !)
  * @5d0b986a083e0d91f116de4691e2aaa54d5bbec0 (*)> -R r1 outgoing r2 *-T{rev} * --config *extensions.blackbox=* (glob)
  * @5d0b986a083e0d91f116de4691e2aaa54d5bbec0 (*)> found 101 common and 1 unknown server heads, 2 roundtrips in *.????s (glob)
  * @5d0b986a083e0d91f116de4691e2aaa54d5bbec0 (*)> -R r1 outgoing r2 *-T{rev} * --config *extensions.blackbox=* exited 0 after *.?? seconds (glob)
  $ cd ..