annotate tests/test-update-branches.t @ 41247:a89b20a49c13

rust-cpython: using MissingAncestors from Python code

As precedently done with LazyAncestors on cpython.rs, we test for the
presence of the 'rustext' module.

incrementalmissingrevs() has two callers within the Mercurial core:
`setdiscovery.partialdiscovery` and the `only()` revset.

This move shows a significant discovery performance improvement
in cases where the baseline is slow: using perfdiscovery on the PyPy
repos, prepared with `contrib/discovery-helper <repo> 50 100`, we
get averaged medians of 403ms with the Rust version vs 742ms without
(about 45% better).

But there are still indications that performance can be worse in cases
the baseline is fast, possibly due to the conversion from Python to
Rust and back becoming the bottleneck. We could measure this on
mozilla-central in cases were the delta is just a few changesets.
This requires confirmation, but if that's the reason, then an
upcoming `partialdiscovery` fully in Rust should solve the problem.

Differential Revision: https://phab.mercurial-scm.org/D5551

# Construct the following history tree:
#
# @  5:e1bb631146ca  b1
# |
# o  4:a4fdb3b883c4 0:b608b9236435  b1
# |
# | o  3:4b57d2520816 1:44592833ba9f
# | |
# | | o  2:063f31070f65
# | |/
# | o  1:44592833ba9f
# |/
# o  0:b608b9236435

  $ mkdir b1
  $ cd b1
  $ hg init
  $ echo foo > foo
  $ echo zero > a
  $ hg init sub
  $ echo suba > sub/suba
  $ hg --cwd sub ci -Am addsuba
  adding suba
  $ echo 'sub = sub' > .hgsub
  $ hg ci -qAm0
  $ echo one > a ; hg ci -m1
  $ echo two > a ; hg ci -m2
  $ hg up -q 1
  $ echo three > a ; hg ci -qm3
  $ hg up -q 0
  $ hg branch -q b1
  $ echo four > a ; hg ci -qm4
  $ echo five > a ; hg ci -qm5

Initial repo state:

  $ hg log -G --template '{rev}:{node|short} {parents} {branches}\n'
  @  5:ff252e8273df  b1
  |
  o  4:d047485b3896 0:60829823a42a  b1
  |
  | o  3:6efa171f091b 1:0786582aa4b1
  | |
  | | o  2:bd10386d478c
  | |/
  | o  1:0786582aa4b1
  |/
  o  0:60829823a42a
  

Make sure update doesn't assume b1 is a repository if invoked from outside:

  $ cd ..
  $ hg update b1
  abort: no repository found in '$TESTTMP' (.hg not found)!
  [255]
  $ cd b1

Test helper functions:

  $ revtest () {
  >     msg=$1
  >     dirtyflag=$2   # 'clean', 'dirty' or 'dirtysub'
  >     startrev=$3
  >     targetrev=$4
  >     opt=$5
  >     hg up -qC $startrev
  >     test $dirtyflag = dirty && echo dirty > foo
  >     test $dirtyflag = dirtysub && echo dirty > sub/suba
  >     hg up $opt $targetrev
  >     hg parent --template 'parent={rev}\n'
  >     hg stat -S
  > }

  $ norevtest () {
  >     msg=$1
  >     dirtyflag=$2   # 'clean', 'dirty' or 'dirtysub'
  >     startrev=$3
  >     opt=$4
  >     hg up -qC $startrev
  >     test $dirtyflag = dirty && echo dirty > foo
  >     test $dirtyflag = dirtysub && echo dirty > sub/suba
  >     hg up $opt
  >     hg parent --template 'parent={rev}\n'
  >     hg stat -S
  > }

Test cases are documented in a table in the update function of merge.py.
Cases are run as shown in that table, row by row.

  $ norevtest 'none clean linear' clean 4
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=5

  $ norevtest 'none clean same'   clean 2
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "bd10386d478c: 2"
  1 other heads for branch "default"
  parent=2


  $ revtest 'none clean linear' clean 1 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=2

  $ revtest 'none clean same'   clean 2 3
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=3

  $ revtest 'none clean cross'  clean 3 4
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=4


  $ revtest 'none dirty linear' dirty 1 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=2
  M foo

  $ revtest 'none dirtysub linear' dirtysub 1 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=2
  M sub/suba

  $ revtest 'none dirty same'   dirty 2 3
  abort: uncommitted changes
  (commit or update --clean to discard changes)
  parent=2
  M foo

  $ revtest 'none dirtysub same'   dirtysub 2 3
  abort: uncommitted changes
  (commit or update --clean to discard changes)
  parent=2
  M sub/suba

  $ revtest 'none dirty cross'  dirty 3 4
  abort: uncommitted changes
  (commit or update --clean to discard changes)
  parent=3
  M foo

  $ norevtest 'none dirty cross'  dirty 2
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "bd10386d478c: 2"
  1 other heads for branch "default"
  parent=2
  M foo

  $ revtest 'none dirtysub cross'  dirtysub 3 4
  abort: uncommitted changes
  (commit or update --clean to discard changes)
  parent=3
  M sub/suba

  $ revtest '-C dirty linear'   dirty 1 2 -C
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=2

  $ revtest '-c dirty linear'   dirty 1 2 -c
  abort: uncommitted changes
  parent=1
  M foo

  $ revtest '-m dirty linear'   dirty 1 2 -m
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=2
  M foo

  $ revtest '-m dirty cross'  dirty 3 4 -m
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=4
  M foo

  $ revtest '-c dirtysub linear'   dirtysub 1 2 -c
  abort: uncommitted changes in subrepository "sub"
  parent=1
  M sub/suba

  $ norevtest '-c clean same'   clean 2 -c
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "bd10386d478c: 2"
  1 other heads for branch "default"
  parent=2

  $ revtest '-cC dirty linear'  dirty 1 2 -cC
  abort: can only specify one of -C/--clean, -c/--check, or -m/--merge
  parent=1
  M foo

  $ revtest '-mc dirty linear'  dirty 1 2 -mc
  abort: can only specify one of -C/--clean, -c/--check, or -m/--merge
  parent=1
  M foo

  $ revtest '-mC dirty linear'  dirty 1 2 -mC
  abort: can only specify one of -C/--clean, -c/--check, or -m/--merge
  parent=1
  M foo

  $ echo '[commands]' >> .hg/hgrc
  $ echo 'update.check = abort' >> .hg/hgrc

  $ revtest 'none dirty linear' dirty 1 2
  abort: uncommitted changes
  parent=1
  M foo

  $ revtest 'none dirty linear' dirty 1 2 -c
  abort: uncommitted changes
  parent=1
  M foo

  $ revtest 'none dirty linear' dirty 1 2 -C
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=2

  $ echo 'update.check = none' >> .hg/hgrc

  $ revtest 'none dirty cross'  dirty 3 4
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=4
  M foo

  $ revtest 'none dirty linear' dirty 1 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=2
  M foo

  $ revtest 'none dirty linear' dirty 1 2 -c
  abort: uncommitted changes
  parent=1
  M foo

  $ revtest 'none dirty linear' dirty 1 2 -C
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=2

  $ hg co -qC 3
  $ echo dirty >> a
  $ hg co --tool :merge3 4
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges
  [1]
  $ hg st
  M a
  ? a.orig
  $ cat a
  <<<<<<< working copy: 6efa171f091b - test: 3
  three
  dirty
  ||||||| base
  three
  =======
  four
  >>>>>>> destination:  d047485b3896 b1 - test: 4
  $ rm a.orig

  $ echo 'update.check = noconflict' >> .hg/hgrc

  $ revtest 'none dirty cross'  dirty 3 4
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=4
  M foo

  $ revtest 'none dirty linear' dirty 1 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=2
  M foo

  $ revtest 'none dirty linear' dirty 1 2 -c
  abort: uncommitted changes
  parent=1
  M foo

  $ revtest 'none dirty linear' dirty 1 2 -C
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=2

Locally added file is allowed
  $ hg up -qC 3
  $ echo a > bar
  $ hg add bar
  $ hg up -q 4
  $ hg st
  A bar
  $ hg forget bar
  $ rm bar

Locally removed file is allowed
  $ hg up -qC 3
  $ hg rm foo
  $ hg up -q 4

File conflict is not allowed
  $ hg up -qC 3
  $ echo dirty >> a
  $ hg up -q 4
  abort: conflicting changes
  (commit or update --clean to discard changes)
  [255]
  $ hg up -m 4
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges
  [1]
  $ rm a.orig

Change/delete conflict is not allowed
  $ hg up -qC 3
  $ hg rm foo
  $ hg up -q 4

Uses default value of "linear" when value is misspelled
  $ echo 'update.check = linyar' >> .hg/hgrc

  $ revtest 'dirty cross'  dirty 3 4
  abort: uncommitted changes
  (commit or update --clean to discard changes)
  parent=3
  M foo

Setup for later tests
  $ revtest 'none dirty linear' dirty 1 2 -c
  abort: uncommitted changes
  parent=1
  M foo

  $ cd ..

Test updating to null revision

  $ hg init null-repo
  $ cd null-repo
  $ echo a > a
  $ hg add a
  $ hg ci -m a
  $ hg up -qC 0
  $ echo b > b
  $ hg add b
  $ hg up null
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg st
  A b
  $ hg up -q 0
  $ hg st
  A b
  $ hg up -qC null
  $ hg st
  ? b
  $ cd ..

Test updating with closed head
---------------------------------------------------------------------

  $ hg clone -U -q b1 closed-heads
  $ cd closed-heads

Test updating if at least one non-closed branch head exists

if on the closed branch head:
- update to "."
- "updated to a closed branch head ...." message is displayed
- "N other heads for ...." message is displayed

  $ hg update -q -C 3
  $ hg commit --close-branch -m 6
  $ norevtest "on closed branch head" clean 6
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  no open descendant heads on branch "default", updating to a closed head
  (committing will reopen the head, use 'hg heads .' to see 1 other heads)
  parent=6

if descendant non-closed branch head exists, and it is only one branch head:
- update to it, even if its revision is less than closed one
- "N other heads for ...." message isn't displayed

  $ norevtest "non-closed 2 should be chosen" clean 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=2

if all descendant branch heads are closed, but there is another branch head:
- update to the tipmost descendant head
- "updated to a closed branch head ...." message is displayed
- "N other heads for ...." message is displayed

  $ norevtest "all descendant branch heads are closed" clean 3
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  no open descendant heads on branch "default", updating to a closed head
  (committing will reopen the head, use 'hg heads .' to see 1 other heads)
  parent=6

Test updating if all branch heads are closed

if on the closed branch head:
- update to "."
- "updated to a closed branch head ...." message is displayed
- "all heads of branch ...." message is displayed

  $ hg update -q -C 2
  $ hg commit --close-branch -m 7
  $ norevtest "all heads of branch default are closed" clean 6
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  no open descendant heads on branch "default", updating to a closed head
  (committing will reopen branch "default")
  parent=6

if not on the closed branch head:
- update to the tipmost descendant (closed) head
- "updated to a closed branch head ...." message is displayed
- "all heads of branch ...." message is displayed

  $ norevtest "all heads of branch default are closed" clean 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  no open descendant heads on branch "default", updating to a closed head
  (committing will reopen branch "default")
  parent=7

  $ cd ..

Test updating if "default" branch doesn't exist and no revision is
checked out (= "default" is used as current branch)

  $ hg init no-default-branch
  $ cd no-default-branch

  $ hg branch foobar
  marked working directory as branch foobar
  (branches are permanent and global, did you want a bookmark?)
  $ echo a > a
  $ hg commit -m "#0" -A
  adding a
  $ echo 1 >> a
  $ hg commit -m "#1"
  $ hg update -q 0
  $ echo 3 >> a
  $ hg commit -m "#2"
  created new head
  $ hg commit --close-branch -m "#3"

if there is at least one non-closed branch head:
- update to the tipmost branch head

  $ norevtest "non-closed 1 should be chosen" clean null
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  parent=1

if all branch heads are closed
- update to "tip"
- "updated to a closed branch head ...." message is displayed
- "all heads for branch "XXXX" are closed" message is displayed

  $ hg update -q -C 1
  $ hg commit --close-branch -m "#4"

  $ norevtest "all branches are closed" clean null
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  no open descendant heads on branch "foobar", updating to a closed head
  (committing will reopen branch "foobar")
  parent=4

  $ cd ../b1

Test obsolescence behavior
---------------------------------------------------------------------

successors should be taken in account when checking head destination

  $ cat << EOF >> $HGRCPATH
  > [ui]
  > logtemplate={rev}:{node|short} {desc|firstline}
  > [experimental]
  > evolution.createmarkers=True
  > EOF

Test no-argument update to a successor of an obsoleted changeset

  $ hg log -G
  o  5:ff252e8273df 5
  |
  o  4:d047485b3896 4
  |
  | o  3:6efa171f091b 3
  | |
  | | o  2:bd10386d478c 2
  | |/
  | @  1:0786582aa4b1 1
  |/
  o  0:60829823a42a 0
  
  $ hg book bm -r 3
  $ hg status
  M foo

We add simple obsolescence marker between 3 and 4 (indirect successors)

  $ hg id --debug -i -r 3
  6efa171f091b00a3c35edc15d48c52a498929953
  $ hg id --debug -i -r 4
  d047485b3896813b2a624e86201983520f003206
  $ hg debugobsolete 6efa171f091b00a3c35edc15d48c52a498929953 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
  obsoleted 1 changesets
  $ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa d047485b3896813b2a624e86201983520f003206

Test that 5 is detected as a valid destination from 3 and also accepts moving
the bookmark (issue4015)

  $ hg up --quiet --hidden 3
  $ hg up 5
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg book bm
  moving bookmark 'bm' forward from 6efa171f091b
  $ hg bookmarks
   * bm                        5:ff252e8273df

Test that we abort before we warn about the hidden commit if the working
directory is dirty
  $ echo conflict > a
  $ hg up --hidden 3
  abort: uncommitted changes
  (commit or update --clean to discard changes)
  [255]

Test that we still warn also when there are conflicts
  $ hg up -m --hidden 3
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges
  (leaving bookmark bm)
  updated to hidden changeset 6efa171f091b
  (hidden revision '6efa171f091b' was rewritten as: d047485b3896)
  [1]
  $ hg revert -r . a
  $ hg resolve -m
  (no more unresolved files)

Test that 4 is detected as the no-argument destination from 3 and also moves
the bookmark with it
  $ hg up --quiet 0          # we should be able to update to 3 directly
  $ hg up --quiet --hidden 3 # but not implemented yet.
  updated to hidden changeset 6efa171f091b
  (hidden revision '6efa171f091b' was rewritten as: d047485b3896)
  $ hg book -f bm
  $ hg up
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updating bookmark bm
  $ hg book
   * bm                        4:d047485b3896

Test that 5 is detected as a valid destination from 1
  $ hg up --quiet 0          # we should be able to update to 3 directly
  $ hg up --quiet --hidden 3 # but not implemented yet.
  updated to hidden changeset 6efa171f091b
  (hidden revision '6efa171f091b' was rewritten as: d047485b3896)
  $ hg up 5
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Test that 5 is not detected as a valid destination from 2
  $ hg up --quiet 0
  $ hg up --quiet 2
  $ hg up 5
  abort: uncommitted changes
  (commit or update --clean to discard changes)
  [255]

Test that we don't crash when updating from a pruned changeset (i.e. has no
successors). Behavior should probably be that we update to the first
non-obsolete parent but that will be decided later.
  $ hg id --debug -r 2
  bd10386d478cd5a9faf2e604114c8e6da62d3889
  $ hg up --quiet 0
  $ hg up --quiet 2
  $ hg debugobsolete bd10386d478cd5a9faf2e604114c8e6da62d3889
  obsoleted 1 changesets
  $ hg up
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

Test experimental revset support

  $ hg log -r '_destupdate()'
  2:bd10386d478c 2 (no-eol)

Test that boolean flags allow --no-flag specification to override [defaults]
  $ cat >> $HGRCPATH <<EOF
  > [defaults]
  > update = --check
  > EOF
  $ hg co 2
  abort: uncommitted changes
  [255]
  $ hg co --no-check 2
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved