tests/test-rebase-pull.t

tests-subrepo-git: emit a different "pwned" message based on the test

Having a single "pwned" message which may or may not be emitted during the
tests for CVE-2016-3068 leads to extra confusion.  Allow each test to emit
a more detailed message based on what the expectations are.

In both cases, we expect a version of git which has had the vulnerability
plugged, as well as a version of mercurial which also knows about
GIT_ALLOW_PROTOCOL.  For the first test, we make sure GIT_ALLOW_PROTOCOL is
unset, meaning that the ext-protocol subrepo should be ignored; if it
isn't, there's either a problem with mercurial or the installed copy of
git.

For the second test, we explicitly allow ext-protocol subrepos, which means
that the subrepo will be accessed and a message emitted confirming that
this was, in fact, our intention.

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > rebase=
  > 
  > [alias]
  > tglog = log -G --template "{rev}: '{desc}' {branches}\n"
  > EOF


  $ hg init a
  $ cd a

  $ echo C1 > C1
  $ hg ci -Am C1
  adding C1

  $ echo C2 > C2
  $ hg ci -Am C2
  adding C2

  $ cd ..

  $ hg clone a b
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg clone a c
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd b

  $ echo L1 > L1
  $ hg ci -Am L1
  adding L1


  $ cd ../a

  $ echo R1 > R1
  $ hg ci -Am R1
  adding R1


  $ cd ../b

Now b has one revision to be pulled from a:

  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  rebasing 2:ff8d69a621f9 "L1"
  saved backup bundle to $TESTTMP/b/.hg/strip-backup/ff8d69a621f9-160fa373-backup.hg (glob)

  $ hg tglog
  @  3: 'L1'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  
Re-run:

  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  no changes found


Invoke pull --rebase and nothing to rebase:

  $ cd ../c

  $ hg book norebase
  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  nothing to rebase - updating instead
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updating bookmark norebase

  $ hg tglog -l 1
  @  2: 'R1'
  |
  ~

pull --rebase --update should ignore --update:

  $ hg pull --rebase --update
  pulling from $TESTTMP/a (glob)
  searching for changes
  no changes found

pull --rebase doesn't update if nothing has been pulled:

  $ hg up -q 1

  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  no changes found

  $ hg tglog -l 1
  o  2: 'R1'
  |
  ~

  $ cd ..

pull --rebase works when a specific revision is pulled (issue3619)

  $ cd a
  $ hg tglog
  @  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  
  $ echo R2 > R2
  $ hg ci -Am R2
  adding R2
  $ echo R3 > R3
  $ hg ci -Am R3
  adding R3
  $ cd ../c
  $ hg tglog
  o  2: 'R1'
  |
  @  1: 'C2'
  |
  o  0: 'C1'
  
  $ echo L1 > L1
  $ hg ci -Am L1
  adding L1
  created new head
  $ hg pull --rev tip --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  rebasing 3:ff8d69a621f9 "L1"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/ff8d69a621f9-160fa373-backup.hg (glob)
  $ hg tglog
  @  5: 'L1'
  |
  o  4: 'R3'
  |
  o  3: 'R2'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  
pull --rebase works with bundle2 turned on

  $ cd ../a
  $ echo R4 > R4
  $ hg ci -Am R4
  adding R4
  $ hg tglog
  @  5: 'R4'
  |
  o  4: 'R3'
  |
  o  3: 'R2'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  
  $ cd ../c
  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  rebasing 5:518d153c0ba3 "L1"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/518d153c0ba3-73407f14-backup.hg (glob)
  $ hg tglog
  @  6: 'L1'
  |
  o  5: 'R4'
  |
  o  4: 'R3'
  |
  o  3: 'R2'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  

pull --rebase only update if there is nothing to rebase

  $ cd ../a
  $ echo R5 > R5
  $ hg ci -Am R5
  adding R5
  $ hg tglog
  @  6: 'R5'
  |
  o  5: 'R4'
  |
  o  4: 'R3'
  |
  o  3: 'R2'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  
  $ cd ../c
  $ echo L2 > L2
  $ hg ci -Am L2
  adding L2
  $ hg up 'desc(L1)'
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  rebasing 6:0d0727eb7ce0 "L1"
  rebasing 7:c1f58876e3bf "L2"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/0d0727eb7ce0-ef61ccb2-backup.hg (glob)
  $ hg tglog
  o  8: 'L2'
  |
  @  7: 'L1'
  |
  o  6: 'R5'
  |
  o  5: 'R4'
  |
  o  4: 'R3'
  |
  o  3: 'R2'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  

pull --rebase update (no rebase) use proper update:

- warn about other head.

  $ cd ../a
  $ echo R6 > R6
  $ hg ci -Am R6
  adding R6
  $ cd ../c
  $ hg up 'desc(R5)'
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  nothing to rebase - updating instead
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  1 other heads for branch "default"
  $ hg tglog
  @  9: 'R6'
  |
  | o  8: 'L2'
  | |
  | o  7: 'L1'
  |/
  o  6: 'R5'
  |
  o  5: 'R4'
  |
  o  4: 'R3'
  |
  o  3: 'R2'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  

Multiple pre-existing heads on the branch
-----------------------------------------

Pull bring content, but nothing on the current branch, we should not consider
pre-existing heads.

  $ cd ../a
  $ hg branch unrelatedbranch
  marked working directory as branch unrelatedbranch
  (branches are permanent and global, did you want a bookmark?)
  $ echo B1 > B1
  $ hg commit -Am B1
  adding B1
  $ cd ../c
  $ hg up 'desc(L2)'
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  nothing to rebase

There is two local heads and we pull a third one.
The second local head should not confuse the `hg pull rebase`.

  $ hg up 'desc(R6)'
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ echo M1 > M1
  $ hg commit -Am M1
  adding M1
  $ cd ../a
  $ hg up 'desc(R6)'
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo R7 > R7
  $ hg commit -Am R7
  adding R7
  $ cd ../c
  $ hg up 'desc(L2)'
  2 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  rebasing 7:864e0a2d2614 "L1"
  rebasing 8:6dc0ea5dcf55 "L2"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/864e0a2d2614-2f72c89c-backup.hg (glob)
  $ hg tglog
  @  12: 'L2'
  |
  o  11: 'L1'
  |
  o  10: 'R7'
  |
  | o  9: 'M1'
  |/
  | o  8: 'B1' unrelatedbranch
  |/
  o  7: 'R6'
  |
  o  6: 'R5'
  |
  o  5: 'R4'
  |
  o  4: 'R3'
  |
  o  3: 'R2'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'