tests/test-chg.t

revlog: don't say "not found" on internal error

If index_node() returned NULL, then index_find_node() and and
nt_partialmatch() used to return -2 to signal that the node was not
found. However, we were passing in a revnum to index_node() that we
knew should exist, so the only reason it could return NULL was due to
some internal error or perhaps out of memory. Let's not use "not
found" for these cases. I suppose we never noticed this because these
error never happen in practice.

I think there are more places where we should error out instead of
reporting that the node was not found, but the cases mentioned above
were all I cared about right now (because using the same error code
for all failures simplified some future patches).

Differential Revision: https://phab.mercurial-scm.org/D3457

#require chg

  $ cp $HGRCPATH $HGRCPATH.orig

init repo

  $ chg init foo
  $ cd foo

ill-formed config

  $ chg status
  $ echo '=brokenconfig' >> $HGRCPATH
  $ chg status
  hg: parse error at * (glob)
  [255]

  $ cp $HGRCPATH.orig $HGRCPATH

long socket path

  $ sockpath=$TESTTMP/this/path/should/be/longer/than/one-hundred-and-seven/characters/where/107/is/the/typical/size/limit/of/unix-domain-socket
  $ mkdir -p $sockpath
  $ bakchgsockname=$CHGSOCKNAME
  $ CHGSOCKNAME=$sockpath/server
  $ export CHGSOCKNAME
  $ chg root
  $TESTTMP/foo
  $ rm -rf $sockpath
  $ CHGSOCKNAME=$bakchgsockname
  $ export CHGSOCKNAME

  $ cd ..

editor
------

  $ cat >> pushbuffer.py <<EOF
  > def reposetup(ui, repo):
  >     repo.ui.pushbuffer(subproc=True)
  > EOF

  $ chg init editor
  $ cd editor

by default, system() should be redirected to the client:

  $ touch foo
  $ CHGDEBUG= HGEDITOR=cat chg ci -Am channeled --edit 2>&1 \
  > | egrep "HG:|run 'cat"
  chg: debug: * run 'cat "*"' at '$TESTTMP/editor' (glob)
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to abort commit.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: added foo

but no redirection should be made if output is captured:

  $ touch bar
  $ CHGDEBUG= HGEDITOR=cat chg ci -Am bufferred --edit \
  > --config extensions.pushbuffer="$TESTTMP/pushbuffer.py" 2>&1 \
  > | egrep "HG:|run 'cat"
  [1]

check that commit commands succeeded:

  $ hg log -T '{rev}:{desc}\n'
  1:bufferred
  0:channeled

  $ cd ..

pager
-----

  $ cat >> fakepager.py <<EOF
  > import sys
  > for line in sys.stdin:
  >     sys.stdout.write('paged! %r\n' % line)
  > EOF

enable pager extension globally, but spawns the master server with no tty:

  $ chg init pager
  $ cd pager
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > pager =
  > [pager]
  > pager = $PYTHON $TESTTMP/fakepager.py
  > EOF
  $ chg version > /dev/null
  $ touch foo
  $ chg ci -qAm foo

pager should be enabled if the attached client has a tty:

  $ chg log -l1 -q --config ui.formatted=True
  paged! '0:1f7b0de80e11\n'
  $ chg log -l1 -q --config ui.formatted=False
  0:1f7b0de80e11

chg waits for pager if runcommand raises

  $ cat > $TESTTMP/crash.py <<EOF
  > from mercurial import registrar
  > cmdtable = {}
  > command = registrar.command(cmdtable)
  > @command(b'crash')
  > def pagercrash(ui, repo, *pats, **opts):
  >     ui.write('going to crash\n')
  >     raise Exception('.')
  > EOF

  $ cat > $TESTTMP/fakepager.py <<EOF
  > from __future__ import absolute_import
  > import sys
  > import time
  > for line in iter(sys.stdin.readline, ''):
  >     if 'crash' in line: # only interested in lines containing 'crash'
  >         # if chg exits when pager is sleeping (incorrectly), the output
  >         # will be captured by the next test case
  >         time.sleep(1)
  >         sys.stdout.write('crash-pager: %s' % line)
  > EOF

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > crash = $TESTTMP/crash.py
  > EOF

  $ chg crash --pager=on --config ui.formatted=True 2>/dev/null
  crash-pager: going to crash
  [255]

  $ cd ..

server lifecycle
----------------

chg server should be restarted on code change, and old server will shut down
automatically. In this test, we use the following time parameters:

 - "sleep 1" to make mtime different
 - "sleep 2" to notice mtime change (polling interval is 1 sec)

set up repository with an extension:

  $ chg init extreload
  $ cd extreload
  $ touch dummyext.py
  $ cat <<EOF >> .hg/hgrc
  > [extensions]
  > dummyext = dummyext.py
  > EOF

isolate socket directory for stable result:

  $ OLDCHGSOCKNAME=$CHGSOCKNAME
  $ mkdir chgsock
  $ CHGSOCKNAME=`pwd`/chgsock/server

warm up server:

  $ CHGDEBUG= chg log 2>&1 | egrep 'instruction|start'
  chg: debug: * start cmdserver at $TESTTMP/extreload/chgsock/server.* (glob)

new server should be started if extension modified:

  $ sleep 1
  $ touch dummyext.py
  $ CHGDEBUG= chg log 2>&1 | egrep 'instruction|start'
  chg: debug: * instruction: unlink $TESTTMP/extreload/chgsock/server-* (glob)
  chg: debug: * instruction: reconnect (glob)
  chg: debug: * start cmdserver at $TESTTMP/extreload/chgsock/server.* (glob)

old server will shut down, while new server should still be reachable:

  $ sleep 2
  $ CHGDEBUG= chg log 2>&1 | (egrep 'instruction|start' || true)

socket file should never be unlinked by old server:
(simulates unowned socket by updating mtime, which makes sure server exits
at polling cycle)

  $ ls chgsock/server-*
  chgsock/server-* (glob)
  $ touch chgsock/server-*
  $ sleep 2
  $ ls chgsock/server-*
  chgsock/server-* (glob)

since no server is reachable from socket file, new server should be started:
(this test makes sure that old server shut down automatically)

  $ CHGDEBUG= chg log 2>&1 | egrep 'instruction|start'
  chg: debug: * start cmdserver at $TESTTMP/extreload/chgsock/server.* (glob)

shut down servers and restore environment:

  $ rm -R chgsock
  $ CHGSOCKNAME=$OLDCHGSOCKNAME
  $ cd ..