tests/test-exchange-obsmarkers-case-A5.t

revlog: don't say "not found" on internal error

If index_node() returned NULL, then index_find_node() and and
nt_partialmatch() used to return -2 to signal that the node was not
found. However, we were passing in a revnum to index_node() that we
knew should exist, so the only reason it could return NULL was due to
some internal error or perhaps out of memory. Let's not use "not
found" for these cases. I suppose we never noticed this because these
error never happen in practice.

I think there are more places where we should error out instead of
reporting that the node was not found, but the cases mentioned above
were all I cared about right now (because using the same error code
for all failures simplified some future patches).

Differential Revision: https://phab.mercurial-scm.org/D3457

============================================
Testing obsolescence markers push: Cases A.5
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category A: simple cases
TestCase 5: partial reordering

A.5 partial reordering
======================

..
.. {{{
..   B ø⇠⇠
..     | ⇡
..   A ø⇠⇠⇠○ A'
..     | ⇡/
..     | ○ B'
..     |/
..     ● O
.. }}}
..
.. Marker exist from:
..
..  * `Aø⇠○ A'`
..  * `Bø⇠○ B'`
..
.. Command run:
..
..  * hg push -r B
..
.. Expected exchange:
..
..  * `Bø⇠○ B'`
..
.. Expected Exclude:
..
..  * `Aø⇠○ A'`

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

initial

  $ setuprepos A.5
  creating test repo for test case A.5
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A0
  $ mkcommit B0
  $ hg update 0
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ mkcommit B1
  created new head
  $ mkcommit A1
  $ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa `getid 'desc(A0)'`
  $ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'`
  obsoleted 1 changesets
  $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
  obsoleted 1 changesets
  $ hg log -G --hidden
  @  8c0a98c83722 (draft): A1
  |
  o  f6298a8ac3a4 (draft): B1
  |
  | x  6e72f0a95b5e (draft): B0
  | |
  | x  28b51eb45704 (draft): A0
  |/
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f 8c0a98c8372212c6efde4bfdcef006f27ff759d3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

Actual Test
-----------

  $ dotest A.5 B1
  ## Running testcase A.5
  # testing echange of "B1" (f6298a8ac3a4)
  ## initial state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f 8c0a98c8372212c6efde4bfdcef006f27ff759d3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "B1" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f 8c0a98c8372212c6efde4bfdcef006f27ff759d3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "f6298a8ac3a4" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  1 new obsolescence markers
  new changesets f6298a8ac3a4
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f 8c0a98c8372212c6efde4bfdcef006f27ff759d3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}