annotate tests/test-export.t @ 23923:ab6fd3205dad stable

largefiles: fix commit of a directory with no largefile changes (issue4330)

When a directory is named in the commit file list, the previous behavior was to
walk the list, and if no normal files in the directory were also named, add the
corresponding standin for each largefile in that directory.  The directory is
then dropped from the list, so that committing a directory with no normal file
changes works.  It then added the corresponding standin directory for the first
largefile seen, by prefixing it with '.hglf/'.

The latter is unnecessary since each affected largefile is explicitly referenced
by its standin in the list.  It also caused an abort if there were no changed
largefiles in the directory, because none of its standins changed:

    abort: .hglf/foo/bar: no match under directory!

This list of files is used to tweak a matcher in lfutil.updatestandinsbymatch(),
which is what is passed to commit().

The status() call that is ultimately done in the commit code with this matcher
seems to have some OS specific differences.  It is not necessary to append '.'
for Windows to run the largefiles tests cleanly.  But if '.' is not added to the
list, the match function isn't called on Linux, so status() would miss any
normal files that were also in a named directory.  The commit then proceeds
without those normal files, or says "nothing changed" if there were no changed
largefiles in the directory.  This is not filesystem specific, as VFAT on Linux
had the same behavior as when run on ext4.  It is also not an issue with
lfilesrepo.status(), since that only calls the overridden implementation when
paths are passed to commit.  I dont have access to an OS X machine ATM to test
there.

Maybe there's a better way to do this.  But since the standin directory for the
first largefile was previously being added, and that caused the same walk in
status(), there's no preformance change to this.  There is no danger of
erroneously committing files in '.', because the original match function is
called, and if it fails, the lfutil.updatestandinsbymatch() tweaked matcher only
indicates a match if the file is in the list of standins- and '.' never is.  The
added tests confirm this.

  $ hg init repo
  $ cd repo
  $ touch foo
  $ hg add foo
  $ for i in 0 1 2 3 4 5 6 7 8 9 10 11; do
  >    echo "foo-$i" >> foo
  >    hg ci -m "foo-$i"
  > done

  $ for out in "%nof%N" "%%%H" "%b-%R" "%h" "%r" "%m"; do
  >    echo
  >    echo "# foo-$out.patch"
  >    hg export -v -o "foo-$out.patch" 2:tip
  > done
  
  # foo-%nof%N.patch
  exporting patches:
  foo-01of10.patch
  foo-02of10.patch
  foo-03of10.patch
  foo-04of10.patch
  foo-05of10.patch
  foo-06of10.patch
  foo-07of10.patch
  foo-08of10.patch
  foo-09of10.patch
  foo-10of10.patch
  
  # foo-%%%H.patch
  exporting patches:
  foo-%617188a1c80f869a7b66c85134da88a6fb145f67.patch
  foo-%dd41a5ff707a5225204105611ba49cc5c229d55f.patch
  foo-%f95a5410f8664b6e1490a4af654e4b7d41a7b321.patch
  foo-%4346bcfde53b4d9042489078bcfa9c3e28201db2.patch
  foo-%afda8c3a009cc99449a05ad8aa4655648c4ecd34.patch
  foo-%35284ce2b6b99c9d2ac66268fe99e68e1974e1aa.patch
  foo-%9688c41894e6931305fa7165a37f6568050b4e9b.patch
  foo-%747d3c68f8ec44bb35816bfcd59aeb50b9654c2f.patch
  foo-%5f17a83f5fbd9414006a5e563eab4c8a00729efd.patch
  foo-%f3acbafac161ec68f1598af38f794f28847ca5d3.patch
  
  # foo-%b-%R.patch
  exporting patches:
  foo-repo-2.patch
  foo-repo-3.patch
  foo-repo-4.patch
  foo-repo-5.patch
  foo-repo-6.patch
  foo-repo-7.patch
  foo-repo-8.patch
  foo-repo-9.patch
  foo-repo-10.patch
  foo-repo-11.patch
  
  # foo-%h.patch
  exporting patches:
  foo-617188a1c80f.patch
  foo-dd41a5ff707a.patch
  foo-f95a5410f866.patch
  foo-4346bcfde53b.patch
  foo-afda8c3a009c.patch
  foo-35284ce2b6b9.patch
  foo-9688c41894e6.patch
  foo-747d3c68f8ec.patch
  foo-5f17a83f5fbd.patch
  foo-f3acbafac161.patch
  
  # foo-%r.patch
  exporting patches:
  foo-02.patch
  foo-03.patch
  foo-04.patch
  foo-05.patch
  foo-06.patch
  foo-07.patch
  foo-08.patch
  foo-09.patch
  foo-10.patch
  foo-11.patch
  
  # foo-%m.patch
  exporting patches:
  foo-foo_2.patch
  foo-foo_3.patch
  foo-foo_4.patch
  foo-foo_5.patch
  foo-foo_6.patch
  foo-foo_7.patch
  foo-foo_8.patch
  foo-foo_9.patch
  foo-foo_10.patch
  foo-foo_11.patch

Doing it again clobbers the files rather than appending:
  $ hg export -v -o "foo-%m.patch" 2:3
  exporting patches:
  foo-foo_2.patch
  foo-foo_3.patch
  $ grep HG foo-foo_2.patch | wc -l
  \s*1 (re)
  $ grep HG foo-foo_3.patch | wc -l
  \s*1 (re)

Exporting 4 changesets to a file:

  $ hg export -o export_internal 1 2 3 4
  $ grep HG export_internal | wc -l
  \s*4 (re)

Doing it again clobbers the file rather than appending:
  $ hg export -o export_internal 1 2 3 4
  $ grep HG export_internal | wc -l
  \s*4 (re)

Exporting 4 changesets to stdout:

  $ hg export 1 2 3 4 | grep HG | wc -l
  \s*4 (re)

Exporting revision -2 to a file:

  $ hg export -- -2
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID 5f17a83f5fbd9414006a5e563eab4c8a00729efd
  # Parent  747d3c68f8ec44bb35816bfcd59aeb50b9654c2f
  foo-10
  
  diff -r 747d3c68f8ec -r 5f17a83f5fbd foo
  --- a/foo	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -8,3 +8,4 @@
   foo-7
   foo-8
   foo-9
  +foo-10

Checking if only alphanumeric characters are used in the file name (%m option):

  $ echo "line" >> foo
  $ hg commit -m " !\"#$%&(,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_\`abcdefghijklmnopqrstuvwxyz{|}~"
  $ hg export -v -o %m.patch tip
  exporting patch:
  ____________0123456789_______ABCDEFGHIJKLMNOPQRSTUVWXYZ______abcdefghijklmnopqrstuvwxyz____.patch

Catch exporting unknown revisions (especially empty revsets, see issue3353)

  $ hg export
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID 197ecd81a57f760b54f34a58817ad5b04991fa47
  # Parent  f3acbafac161ec68f1598af38f794f28847ca5d3
   !"#$%&(,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
  
  diff -r f3acbafac161 -r 197ecd81a57f foo
  --- a/foo	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -10,3 +10,4 @@
   foo-9
   foo-10
   foo-11
  +line

  $ hg export ""
  hg: parse error: empty query
  [255]
  $ hg export 999
  abort: unknown revision '999'!
  [255]
  $ hg export "not all()"
  abort: export requires at least one changeset
  [255]

Check for color output
  $ cat <<EOF >> $HGRCPATH
  > [color]
  > mode = ansi
  > [extensions]
  > color =
  > EOF

  $ hg export --color always --nodates tip
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID * (glob)
  # Parent * (glob)
   !"#$%&(,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
  
  \x1b[0;1mdiff -r f3acbafac161 -r 197ecd81a57f foo\x1b[0m (esc)
  \x1b[0;31;1m--- a/foo\x1b[0m (esc)
  \x1b[0;32;1m+++ b/foo\x1b[0m (esc)
  \x1b[0;35m@@ -10,3 +10,4 @@\x1b[0m (esc)
   foo-9
   foo-10
   foo-11
  \x1b[0;32m+line\x1b[0m (esc)


  $ cd ..