annotate tests/test-mq-eol.t @ 23923:ab6fd3205dad stable

largefiles: fix commit of a directory with no largefile changes (issue4330)

When a directory is named in the commit file list, the previous behavior was to
walk the list, and if no normal files in the directory were also named, add the
corresponding standin for each largefile in that directory.  The directory is
then dropped from the list, so that committing a directory with no normal file
changes works.  It then added the corresponding standin directory for the first
largefile seen, by prefixing it with '.hglf/'.

The latter is unnecessary since each affected largefile is explicitly referenced
by its standin in the list.  It also caused an abort if there were no changed
largefiles in the directory, because none of its standins changed:

    abort: .hglf/foo/bar: no match under directory!

This list of files is used to tweak a matcher in lfutil.updatestandinsbymatch(),
which is what is passed to commit().

The status() call that is ultimately done in the commit code with this matcher
seems to have some OS specific differences.  It is not necessary to append '.'
for Windows to run the largefiles tests cleanly.  But if '.' is not added to the
list, the match function isn't called on Linux, so status() would miss any
normal files that were also in a named directory.  The commit then proceeds
without those normal files, or says "nothing changed" if there were no changed
largefiles in the directory.  This is not filesystem specific, as VFAT on Linux
had the same behavior as when run on ext4.  It is also not an issue with
lfilesrepo.status(), since that only calls the overridden implementation when
paths are passed to commit.  I dont have access to an OS X machine ATM to test
there.

Maybe there's a better way to do this.  But since the standin directory for the
first largefile was previously being added, and that caused the same walk in
status(), there's no preformance change to this.  There is no danger of
erroneously committing files in '.', because the original match function is
called, and if it fails, the lfutil.updatestandinsbymatch() tweaked matcher only
indicates a match if the file is in the list of standins- and '.' never is.  The
added tests confirm this.

Test interactions between mq and patch.eol


  $ cat <<EOF >> $HGRCPATH
  > [extensions]
  > mq =
  > [diff]
  > nodates = 1
  > EOF

  $ cat > makepatch.py <<EOF
  > f = file('eol.diff', 'wb')
  > w = f.write
  > w('test message\n')
  > w('diff --git a/a b/a\n')
  > w('--- a/a\n')
  > w('+++ b/a\n')
  > w('@@ -1,5 +1,5 @@\n')
  > w(' a\n')
  > w('-b\r\n')
  > w('+y\r\n')
  > w(' c\r\n')
  > w(' d\n')
  > w('-e\n')
  > w('\ No newline at end of file\n')
  > w('+z\r\n')
  > w('\ No newline at end of file\r\n')
  > EOF

  $ cat > cateol.py <<EOF
  > import sys
  > for line in file(sys.argv[1], 'rb'):
  >     line = line.replace('\r', '<CR>')
  >     line = line.replace('\n', '<LF>')
  >     print line
  > EOF

  $ hg init repo
  $ cd repo
  $ echo '\.diff' > .hgignore
  $ echo '\.rej' >> .hgignore


Test different --eol values

  $ $PYTHON -c 'file("a", "wb").write("a\nb\nc\nd\ne")'
  $ hg ci -Am adda
  adding .hgignore
  adding a
  $ python ../makepatch.py
  $ hg qimport eol.diff
  adding eol.diff to series file

should fail in strict mode

  $ hg qpush
  applying eol.diff
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working dir
  errors during apply, please fix and refresh eol.diff
  [2]
  $ hg qpop
  popping eol.diff
  patch queue now empty

invalid eol

  $ hg --config patch.eol='LFCR' qpush
  applying eol.diff
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working dir
  errors during apply, please fix and refresh eol.diff
  [2]
  $ hg qpop
  popping eol.diff
  patch queue now empty

force LF

  $ hg --config patch.eol='CRLF' qpush
  applying eol.diff
  now at: eol.diff
  $ hg qrefresh
  $ python ../cateol.py .hg/patches/eol.diff
  # HG changeset patch<LF>
  # Parent  0d0bf99a8b7a3842c6f8ef09e34f69156c4bd9d0<LF>
  test message<LF>
  <LF>
  diff -r 0d0bf99a8b7a a<LF>
  --- a/a<LF>
  +++ b/a<LF>
  @@ -1,5 +1,5 @@<LF>
  -a<LF>
  -b<LF>
  -c<LF>
  -d<LF>
  -e<LF>
  \ No newline at end of file<LF>
  +a<CR><LF>
  +y<CR><LF>
  +c<CR><LF>
  +d<CR><LF>
  +z<LF>
  \ No newline at end of file<LF>
  $ python ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty

push again forcing LF and compare revisions

  $ hg --config patch.eol='CRLF' qpush
  applying eol.diff
  now at: eol.diff
  $ python ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty

push again without LF and compare revisions

  $ hg qpush
  applying eol.diff
  now at: eol.diff
  $ python ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty
  $ cd ..


Test .rej file EOL are left unchanged

  $ hg init testeol
  $ cd testeol
  $ $PYTHON -c "file('a', 'wb').write('1\r\n2\r\n3\r\n4')"
  $ hg ci -Am adda
  adding a
  $ $PYTHON -c "file('a', 'wb').write('1\r\n2\r\n33\r\n4')"
  $ hg qnew patch1
  $ hg qpop
  popping patch1
  patch queue now empty
  $ $PYTHON -c "file('a', 'wb').write('1\r\n22\r\n33\r\n4')"
  $ hg ci -m changea

  $ hg --config 'patch.eol=LF' qpush
  applying patch1
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working dir
  errors during apply, please fix and refresh patch1
  [2]
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cat a.rej
  --- a
  +++ a
  @@ -1,4 +1,4 @@
   1\r (esc)
   2\r (esc)
  -3\r (esc)
  +33\r (esc)
   4
  \ No newline at end of file

  $ hg --config 'patch.eol=auto' qpush
  applying patch1
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working dir
  errors during apply, please fix and refresh patch1
  [2]
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cat a.rej
  --- a
  +++ a
  @@ -1,4 +1,4 @@
   1\r (esc)
   2\r (esc)
  -3\r (esc)
  +33\r (esc)
   4
  \ No newline at end of file
  $ cd ..