annotate tests/test-mq-guards.t @ 23923:ab6fd3205dad stable

largefiles: fix commit of a directory with no largefile changes (issue4330)

When a directory is named in the commit file list, the previous behavior was to
walk the list, and if no normal files in the directory were also named, add the
corresponding standin for each largefile in that directory.  The directory is
then dropped from the list, so that committing a directory with no normal file
changes works.  It then added the corresponding standin directory for the first
largefile seen, by prefixing it with '.hglf/'.

The latter is unnecessary since each affected largefile is explicitly referenced
by its standin in the list.  It also caused an abort if there were no changed
largefiles in the directory, because none of its standins changed:

    abort: .hglf/foo/bar: no match under directory!

This list of files is used to tweak a matcher in lfutil.updatestandinsbymatch(),
which is what is passed to commit().

The status() call that is ultimately done in the commit code with this matcher
seems to have some OS specific differences.  It is not necessary to append '.'
for Windows to run the largefiles tests cleanly.  But if '.' is not added to the
list, the match function isn't called on Linux, so status() would miss any
normal files that were also in a named directory.  The commit then proceeds
without those normal files, or says "nothing changed" if there were no changed
largefiles in the directory.  This is not filesystem specific, as VFAT on Linux
had the same behavior as when run on ext4.  It is also not an issue with
lfilesrepo.status(), since that only calls the overridden implementation when
paths are passed to commit.  I dont have access to an OS X machine ATM to test
there.

Maybe there's a better way to do this.  But since the standin directory for the
first largefile was previously being added, and that caused the same walk in
status(), there's no preformance change to this.  There is no danger of
erroneously committing files in '.', because the original match function is
called, and if it fails, the lfutil.updatestandinsbymatch() tweaked matcher only
indicates a match if the file is in the list of standins- and '.' never is.  The
added tests confirm this.

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH

  $ hg init
  $ hg qinit

  $ echo x > x
  $ hg ci -Ama
  adding x

  $ hg qnew a.patch
  $ echo a > a
  $ hg add a
  $ hg qrefresh

  $ hg qnew b.patch
  $ echo b > b
  $ hg add b
  $ hg qrefresh

  $ hg qnew c.patch
  $ echo c > c
  $ hg add c
  $ hg qrefresh

  $ hg qpop -a
  popping c.patch
  popping b.patch
  popping a.patch
  patch queue now empty


should fail

  $ hg qguard does-not-exist.patch +bleh
  abort: no patch named does-not-exist.patch
  [255]


should fail

  $ hg qguard +fail
  abort: no patches applied
  [255]

  $ hg qpush
  applying a.patch
  now at: a.patch

should guard a.patch

  $ hg qguard +a

should print +a

  $ hg qguard
  a.patch: +a
  $ hg qpop
  popping a.patch
  patch queue now empty


should fail

  $ hg qpush a.patch
  cannot push 'a.patch' - guarded by '+a'
  [1]

  $ hg qguard a.patch
  a.patch: +a

should push b.patch

  $ hg qpush
  applying b.patch
  now at: b.patch

  $ hg qpop
  popping b.patch
  patch queue now empty

test selection of an empty guard

  $ hg qselect ""
  abort: guard cannot be an empty string
  [255]
  $ hg qselect a
  number of unguarded, unapplied patches has changed from 2 to 3

should push a.patch

  $ hg qpush
  applying a.patch
  now at: a.patch

  $ hg qguard -- c.patch -a

should print -a

  $ hg qguard c.patch
  c.patch: -a


should skip c.patch

  $ hg qpush -a
  applying b.patch
  skipping c.patch - guarded by '-a'
  now at: b.patch
  $ hg qnext
  all patches applied
  [1]

should display b.patch

  $ hg qtop
  b.patch

  $ hg qguard -n c.patch

should push c.patch

  $ hg qpush -a
  applying c.patch
  now at: c.patch

  $ hg qpop -a
  popping c.patch
  popping b.patch
  popping a.patch
  patch queue now empty
  $ hg qselect -n
  guards deactivated
  number of unguarded, unapplied patches has changed from 3 to 2

should push all

  $ hg qpush -a
  applying b.patch
  applying c.patch
  now at: c.patch

  $ hg qpop -a
  popping c.patch
  popping b.patch
  patch queue now empty
  $ hg qguard a.patch +1
  $ hg qguard b.patch +2
  $ hg qselect 1
  number of unguarded, unapplied patches has changed from 1 to 2

should push a.patch, not b.patch

  $ hg qpush
  applying a.patch
  now at: a.patch
  $ hg qpush
  applying c.patch
  now at: c.patch
  $ hg qpop -a
  popping c.patch
  popping a.patch
  patch queue now empty

  $ hg qselect 2

should push b.patch

  $ hg qpush
  applying b.patch
  now at: b.patch
  $ hg qpush -a
  applying c.patch
  now at: c.patch
  $ hg qprev
  b.patch

Used to be an issue with holes in the patch sequence
So, put one hole on the base and ask for topmost patch.

  $ hg qtop
  c.patch
  $ hg qpop -a
  popping c.patch
  popping b.patch
  patch queue now empty

  $ hg qselect 1 2
  number of unguarded, unapplied patches has changed from 2 to 3

should push a.patch, b.patch

  $ hg qpush
  applying a.patch
  now at: a.patch
  $ hg qpush
  applying b.patch
  now at: b.patch
  $ hg qpop -a
  popping b.patch
  popping a.patch
  patch queue now empty

  $ hg qguard -- a.patch +1 +2 -3
  $ hg qselect 1 2 3
  number of unguarded, unapplied patches has changed from 3 to 2


list patches and guards

  $ hg qguard -l
  a.patch: +1 +2 -3
  b.patch: +2
  c.patch: unguarded

have at least one patch applied to test coloring

  $ hg qpush
  applying b.patch
  now at: b.patch

list patches and guards with color

  $ hg --config extensions.color= qguard --config color.mode=ansi \
  >     -l --color=always
  \x1b[0;30;1ma.patch\x1b[0m: \x1b[0;33m+1\x1b[0m \x1b[0;33m+2\x1b[0m \x1b[0;31m-3\x1b[0m (esc)
  \x1b[0;34;1;4mb.patch\x1b[0m: \x1b[0;33m+2\x1b[0m (esc)
  \x1b[0;30;1mc.patch\x1b[0m: \x1b[0;32munguarded\x1b[0m (esc)

should pop b.patch

  $ hg qpop
  popping b.patch
  patch queue now empty

list series

  $ hg qseries -v
  0 G a.patch
  1 U b.patch
  2 U c.patch

list guards

  $ hg qselect
  1
  2
  3

should push b.patch

  $ hg qpush
  applying b.patch
  now at: b.patch

  $ hg qpush -a
  applying c.patch
  now at: c.patch
  $ hg qselect -n --reapply -v
  guards deactivated
  popping guarded patches
  popping c.patch
  popping b.patch
  patch queue now empty
  reapplying unguarded patches
  skipping a.patch - guarded by '+1' '+2'
  skipping b.patch - guarded by '+2'
  skipping a.patch - guarded by '+1' '+2'
  skipping b.patch - guarded by '+2'
  applying c.patch
  patching file c
  adding c
  committing files:
  c
  committing manifest
  committing changelog
  now at: c.patch

guards in series file: +1 +2 -3

  $ hg qselect -s
  +1
  +2
  -3

should show c.patch

  $ hg qapplied
  c.patch

  $ hg qrename a.patch new.patch

should show :


new.patch: +1 +2 -3


b.patch: +2


c.patch: unguarded

  $ hg qguard -l
  new.patch: +1 +2 -3
  b.patch: +2
  c.patch: unguarded

  $ hg qnew d.patch
  $ hg qpop
  popping d.patch
  now at: c.patch

should show new.patch and b.patch as Guarded, c.patch as Applied


and d.patch as Unapplied

  $ hg qseries -v
  0 G new.patch
  1 G b.patch
  2 A c.patch
  3 U d.patch

qseries again, but with color

  $ hg --config extensions.color= --config color.mode=ansi qseries -v --color=always
  0 G \x1b[0;30;1mnew.patch\x1b[0m (esc)
  1 G \x1b[0;30;1mb.patch\x1b[0m (esc)
  2 A \x1b[0;34;1;4mc.patch\x1b[0m (esc)
  3 U \x1b[0;30;1md.patch\x1b[0m (esc)

  $ hg qguard d.patch +2

new.patch, b.patch: Guarded. c.patch: Applied. d.patch: Guarded.

  $ hg qseries -v
  0 G new.patch
  1 G b.patch
  2 A c.patch
  3 G d.patch

  $ qappunappv()
  > {
  >     for command in qapplied "qapplied -v" qunapplied "qunapplied -v"; do
  >         echo % hg $command
  >         hg $command
  >     done
  > }

  $ hg qpop -a
  popping c.patch
  patch queue now empty
  $ hg qguard -l
  new.patch: +1 +2 -3
  b.patch: +2
  c.patch: unguarded
  d.patch: +2
  $ qappunappv
  % hg qapplied
  % hg qapplied -v
  % hg qunapplied
  c.patch
  % hg qunapplied -v
  0 G new.patch
  1 G b.patch
  2 U c.patch
  3 G d.patch
  $ hg qselect 1
  number of unguarded, unapplied patches has changed from 1 to 2
  $ qappunappv
  % hg qapplied
  % hg qapplied -v
  % hg qunapplied
  new.patch
  c.patch
  % hg qunapplied -v
  0 U new.patch
  1 G b.patch
  2 U c.patch
  3 G d.patch
  $ hg qpush -a
  applying new.patch
  skipping b.patch - guarded by '+2'
  applying c.patch
  skipping d.patch - guarded by '+2'
  now at: c.patch
  $ qappunappv
  % hg qapplied
  new.patch
  c.patch
  % hg qapplied -v
  0 A new.patch
  1 G b.patch
  2 A c.patch
  % hg qunapplied
  % hg qunapplied -v
  3 G d.patch
  $ hg qselect 2
  number of unguarded, unapplied patches has changed from 0 to 1
  $ qappunappv
  % hg qapplied
  new.patch
  c.patch
  % hg qapplied -v
  0 A new.patch
  1 U b.patch
  2 A c.patch
  % hg qunapplied
  d.patch
  % hg qunapplied -v
  3 U d.patch

  $ for patch in `hg qseries`; do
  >     echo % hg qapplied $patch
  >     hg qapplied $patch
  >     echo % hg qunapplied $patch
  >     hg qunapplied $patch
  > done
  % hg qapplied new.patch
  new.patch
  % hg qunapplied new.patch
  b.patch
  d.patch
  % hg qapplied b.patch
  new.patch
  % hg qunapplied b.patch
  d.patch
  % hg qapplied c.patch
  new.patch
  c.patch
  % hg qunapplied c.patch
  d.patch
  % hg qapplied d.patch
  new.patch
  c.patch
  % hg qunapplied d.patch


hg qseries -m: only b.patch should be shown
the guards file was not ignored in the past

  $ hg qdelete -k b.patch
  $ hg qseries -m
  b.patch

hg qseries -m with color

  $ hg --config extensions.color= --config color.mode=ansi qseries -m --color=always
  \x1b[0;31;1mb.patch\x1b[0m (esc)


excercise corner cases in "qselect --reapply"

  $ hg qpop -a
  popping c.patch
  popping new.patch
  patch queue now empty
  $ hg qguard -- new.patch -not-new
  $ hg qguard -- c.patch -not-c
  $ hg qguard -- d.patch -not-d
  $ hg qpush -a
  applying new.patch
  applying c.patch
  applying d.patch
  patch d.patch is empty
  now at: d.patch
  $ hg qguard -l
  new.patch: -not-new
  c.patch: -not-c
  d.patch: -not-d
  $ hg qselect --reapply not-d
  popping guarded patches
  popping d.patch
  now at: c.patch
  reapplying unguarded patches
  cannot push 'd.patch' - guarded by '-not-d'
  $ hg qser -v
  0 A new.patch
  1 A c.patch
  2 G d.patch
  $ hg qselect --reapply -n
  guards deactivated
  $ hg qpush
  applying d.patch
  patch d.patch is empty
  now at: d.patch
  $ hg qser -v
  0 A new.patch
  1 A c.patch
  2 A d.patch
  $ hg qselect --reapply not-c
  popping guarded patches
  popping d.patch
  popping c.patch
  now at: new.patch
  reapplying unguarded patches
  applying d.patch
  patch d.patch is empty
  now at: d.patch
  $ hg qser -v
  0 A new.patch
  1 G c.patch
  2 A d.patch
  $ hg qselect --reapply not-new
  popping guarded patches
  popping d.patch
  popping new.patch
  patch queue now empty
  reapplying unguarded patches
  applying c.patch
  applying d.patch
  patch d.patch is empty
  now at: d.patch
  $ hg qser -v
  0 G new.patch
  1 A c.patch
  2 A d.patch

test that qselect shows "number of guarded, applied patches" correctly

  $ hg qimport -q -e b.patch
  adding b.patch to series file
  $ hg qguard -- b.patch -not-b
  $ hg qpop -a -q
  patch queue now empty
  $ hg qunapplied -v
  0 G new.patch
  1 U c.patch
  2 U d.patch
  3 U b.patch
  $ hg qselect not-new not-c
  number of unguarded, unapplied patches has changed from 3 to 2
  $ hg qpush -q -a
  patch d.patch is empty
  now at: b.patch

  $ hg qapplied -v
  0 G new.patch
  1 G c.patch
  2 A d.patch
  3 A b.patch
  $ hg qselect --none
  guards deactivated
  $ hg qselect not-new not-c not-d
  number of guarded, applied patches has changed from 0 to 1

test that "qselect --reapply" reapplies patches successfully when the
already applied patch becomes unguarded and it follows the already
guarded (= not yet applied) one.

  $ hg qpop -q -a
  patch queue now empty
  $ hg qselect not-new not-c
  number of unguarded, unapplied patches has changed from 1 to 2
  $ hg qpush -q -a
  patch d.patch is empty
  now at: b.patch
  $ hg qapplied -v
  0 G new.patch
  1 G c.patch
  2 A d.patch
  3 A b.patch
  $ hg qselect -q --reapply not-c not-b
  now at: d.patch
  cannot push 'b.patch' - guarded by '-not-b'
  $ hg qseries -v
  0 U new.patch
  1 G c.patch
  2 A d.patch
  3 G b.patch

test that "qselect --reapply" checks applied patches correctly when no
applied patches becomes guarded but some of unapplied ones become
unguarded.

  $ hg qpop -q -a
  patch queue now empty
  $ hg qselect not-new not-c not-d
  number of unguarded, unapplied patches has changed from 2 to 1
  $ hg qpush -q -a
  now at: b.patch
  $ hg qapplied -v
  0 G new.patch
  1 G c.patch
  2 G d.patch
  3 A b.patch
  $ hg qselect -q --reapply not-new not-c
  $ hg qseries -v
  0 G new.patch
  1 G c.patch
  2 U d.patch
  3 A b.patch