annotate tests/test-mq-qrefresh-replace-log-message.t @ 23923:ab6fd3205dad stable

largefiles: fix commit of a directory with no largefile changes (issue4330)

When a directory is named in the commit file list, the previous behavior was to
walk the list, and if no normal files in the directory were also named, add the
corresponding standin for each largefile in that directory.  The directory is
then dropped from the list, so that committing a directory with no normal file
changes works.  It then added the corresponding standin directory for the first
largefile seen, by prefixing it with '.hglf/'.

The latter is unnecessary since each affected largefile is explicitly referenced
by its standin in the list.  It also caused an abort if there were no changed
largefiles in the directory, because none of its standins changed:

    abort: .hglf/foo/bar: no match under directory!

This list of files is used to tweak a matcher in lfutil.updatestandinsbymatch(),
which is what is passed to commit().

The status() call that is ultimately done in the commit code with this matcher
seems to have some OS specific differences.  It is not necessary to append '.'
for Windows to run the largefiles tests cleanly.  But if '.' is not added to the
list, the match function isn't called on Linux, so status() would miss any
normal files that were also in a named directory.  The commit then proceeds
without those normal files, or says "nothing changed" if there were no changed
largefiles in the directory.  This is not filesystem specific, as VFAT on Linux
had the same behavior as when run on ext4.  It is also not an issue with
lfilesrepo.status(), since that only calls the overridden implementation when
paths are passed to commit.  I dont have access to an OS X machine ATM to test
there.

Maybe there's a better way to do this.  But since the standin directory for the
first largefile was previously being added, and that caused the same walk in
status(), there's no preformance change to this.  There is no danger of
erroneously committing files in '.', because the original match function is
called, and if it fails, the lfutil.updatestandinsbymatch() tweaked matcher only
indicates a match if the file is in the list of standins- and '.' never is.  The
added tests confirm this.

Environment setup for MQ

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH
  $ hg init
  $ hg qinit

Should fail if no patches applied
(this tests also that editor is not invoked if '--edit' is not
specified)

  $ hg qrefresh
  no patches applied
  [1]
  $ hg qrefresh -e
  no patches applied
  [1]
  $ hg qnew -m "First commit message" first-patch
  $ echo aaaa > file
  $ hg add file
  $ HGEDITOR=cat hg qrefresh

Should display 'First commit message'

  $ hg log -l1 --template "{desc}\n"
  First commit message

Testing changing message with -m
(this tests also that '--edit' can be used with '--message', and
that '[committemplate] changeset' definition and commit log specific
template keyword 'extramsg' work well)

  $ cat >> .hg/hgrc <<EOF
  > [committemplate]
  > listupfiles = {file_adds %
  >    "HG: added {file}\n"     }{file_mods %
  >    "HG: changed {file}\n"   }{file_dels %
  >    "HG: removed {file}\n"   }{if(files, "",
  >    "HG: no files changed\n")}
  > 
  > changeset = HG: this is customized commit template
  >     {desc}\n\n
  >     HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  >     HG: {extramsg}
  >     HG: --
  >     HG: user: {author}
  >     HG: branch '{branch}'\n{listupfiles}
  > EOF

  $ echo bbbb > file
  $ HGEDITOR=cat hg qrefresh -m "Second commit message" -e
  HG: this is customized commit template
  Second commit message
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to use default message.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: added file

  $ cat >> .hg/hgrc <<EOF
  > # disable customizing for subsequent tests
  > [committemplate]
  > changeset =
  > EOF

Should display 'Second commit message'

  $ hg log -l1 --template "{desc}\n"
  Second commit message

Testing changing message with -l

  $ echo "Third commit message" > logfile
  $ echo " This is the 3rd log message" >> logfile
  $ echo bbbb > file
  $ hg qrefresh -l logfile

Should display 'Third commit message\\\n This is the 3rd log message'

  $ hg log -l1 --template "{desc}\n"
  Third commit message
   This is the 3rd log message

Testing changing message with -l-

  $ hg qnew -m "First commit message" second-patch
  $ echo aaaa > file2
  $ hg add file2
  $ echo bbbb > file2
  $ (echo "Fifth commit message"; echo " This is the 5th log message") | hg qrefresh -l-

Should display 'Fifth commit message\\\n This is the 5th log message'

  $ hg log -l1 --template "{desc}\n"
  Fifth commit message
   This is the 5th log message

Test saving last-message.txt:

  $ cat > $TESTTMP/editor.sh << EOF
  > echo "==== before editing"
  > cat \$1
  > echo "===="
  > (echo; echo "test saving last-message.txt") >> \$1
  > EOF

  $ cat > $TESTTMP/commitfailure.py <<EOF
  > from mercurial import util
  > def reposetup(ui, repo):
  >     class commitfailure(repo.__class__):
  >         def commit(self, *args, **kwargs):
  >             raise util.Abort('emulating unexpected abort')
  >     repo.__class__ = commitfailure
  > EOF

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > # this failure occurs before editor invocation
  > commitfailure = $TESTTMP/commitfailure.py
  > EOF

  $ hg qapplied
  first-patch
  second-patch
  $ hg tip --template "{files}\n"
  file2

(test that editor is not invoked before transaction starting)

  $ rm -f .hg/last-message.txt
  $ HGEDITOR="sh $TESTTMP/editor.sh" hg qrefresh -e
  refresh interrupted while patch was popped! (revert --all, qpush to recover)
  abort: emulating unexpected abort
  [255]
  $ test -f .hg/last-message.txt
  [1]

(reset applied patches and directory status)

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > commitfailure = !
  > EOF

  $ hg qapplied
  first-patch
  $ hg status -A file2
  ? file2
  $ rm file2
  $ hg qpush -q second-patch
  now at: second-patch

(test that editor is invoked and commit message is saved into
"last-message.txt")

  $ cat >> .hg/hgrc <<EOF
  > [hooks]
  > # this failure occurs after editor invocation
  > pretxncommit.unexpectedabort = false
  > EOF

  $ rm -f .hg/last-message.txt
  $ hg status --rev "second-patch^1" -arm
  A file2
  $ HGEDITOR="sh $TESTTMP/editor.sh" hg qrefresh -e
  ==== before editing
  Fifth commit message
   This is the 5th log message
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to use default message.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: added file2
  ====
  transaction abort!
  rollback completed
  note: commit message saved in .hg/last-message.txt
  refresh interrupted while patch was popped! (revert --all, qpush to recover)
  abort: pretxncommit.unexpectedabort hook exited with status 1
  [255]
  $ cat .hg/last-message.txt
  Fifth commit message
   This is the 5th log message
  
  
  
  test saving last-message.txt