annotate tests/test-narrow-exchange.t @ 39700:b10d145837bc

localrepo: extract resolving of opener options to standalone functions

Requirements and config options are converted into a dict which is
available to the store vfs to consult. This is how storage options
are communicated from the repo layer to the storage layer.

Currently, we do that option resolution in a private method on the
repo instance. And there is a single method doing that resolution.

Opener options are logically specific to the storage backend they
apply to. And, opener options may wish to influence how the repo
object/type is constructed. So it makes sense to have more granular
storage option resolution that occurs before the repo object is
instantiated.

This commit extracts the code for resolving opener options into new
module-level functions. These functions are run before the repo
instance is constructed.

As part of the code move, we split the option resolution into
generic and revlog-specific options. After this commit, we no longer
add revlog-specific options to repos that don't have a revlog
requirement.

Some of these opener options and associated config options might make
sense on alternate storage backends. We can always reuse config
options and opener option names for other backends. But we shouldn't
be passing opener options to storage backends that won't recognize
them. I haven't done it here, but after this commit it should be
possible for store backends to validate the set of opener options
it receives.

Because localrepository.openerreqs is no longer used after this commit,
it has been removed.

I'm not super thrilled about the code outside of localrepo that is
adding requirements and updating opener options. We'll probably want
to create a more formal API for that use case that constructs a new
repo instance and poisons the old repo object. But this was a
pre-existing issue and can be dealt with later. I have little doubt
it will cause me troubles as I continue to refactor how repository
objects are instantiated.

.. api::

   ``localrepository.openerreqs`` has been removed. Override
   ``localrepo.resolvestorevfsoptions()`` to add custom opener options.

.. api::

   ``localrepository._applyopenerreqs()`` has been removed. Use
   ``localrepo.resolvestorevfsoptions()`` to add custom opener options.

Differential Revision: https://phab.mercurial-scm.org/D4576

  $ . "$TESTDIR/narrow-library.sh"

create full repo

  $ hg init master
  $ cd master
  $ cat >> .hg/hgrc <<EOF
  > [narrow]
  > serveellipses=True
  > EOF

  $ mkdir inside
  $ echo 1 > inside/f
  $ mkdir inside2
  $ echo 1 > inside2/f
  $ mkdir outside
  $ echo 1 > outside/f
  $ hg ci -Aqm 'initial'

  $ echo 2 > inside/f
  $ hg ci -qm 'inside 2'

  $ echo 2 > inside2/f
  $ hg ci -qm 'inside2 2'

  $ echo 2 > outside/f
  $ hg ci -qm 'outside 2'

  $ cd ..

  $ hg clone --narrow ssh://user@dummy/master narrow --include inside
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 2 changes to 1 files
  new changesets *:* (glob)
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg clone --narrow ssh://user@dummy/master narrow2 --include inside --include inside2
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 2 files
  new changesets *:* (glob)
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

Can push to wider repo if change does not affect paths in wider repo that are
not also in narrower repo

  $ cd narrow
  $ echo 3 > inside/f
  $ hg ci -m 'inside 3'
  $ hg push ssh://user@dummy/narrow2
  pushing to ssh://user@dummy/narrow2
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

Can push to narrower repo if change affects only paths within remote's
narrow spec

  $ cd ../narrow2
  $ cat >> .hg/hgrc <<EOF
  > [narrow]
  > serveellipses=True
  > EOF
  $ hg co -r 'desc("inside 3")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo 4 > inside/f
  $ hg ci -m 'inside 4'
  $ hg push ssh://user@dummy/narrow
  pushing to ssh://user@dummy/narrow
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

Can push to narrow repo if change affects only paths outside remote's
narrow spec

  $ echo 3 > inside2/f
  $ hg ci -m 'inside2 3'
TODO: this should be successful
  $ hg push ssh://user@dummy/narrow
  pushing to ssh://user@dummy/narrow
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: transaction abort!
  remote: rollback completed
  remote: abort: data/inside2/f.i@4a1aa07735e6: unknown parent! (reporevlogstore !)
  remote: abort: data/inside2/f/index@4a1aa07735e6: no node! (reposimplestore !)
  abort: stream ended unexpectedly (got 0 bytes, expected 4)
  [255]

Can pull from wider repo if change affects only paths outside remote's
narrow spec
  $ echo 4 > inside2/f
  $ hg ci -m 'inside2 4'
  $ hg log -G -T '{rev} {node|short} {files}\n'
  @  7 d78a96df731d inside2/f
  |
  o  6 8c26f5218962 inside2/f
  |
  o  5 ba3480e2f9de inside/f
  |
  o  4 4e5edd526618 inside/f
  |
  o  3 81e7e07b7ab0 outside/f
  |
  o  2 f3993b8c0c2b inside2/f
  |
  o  1 8cd66ca966b4 inside/f
  |
  o  0 c8057d6f53ab inside/f inside2/f outside/f
  
  $ cd ../narrow
  $ hg log -G -T '{rev} {node|short} {files}\n'
  o  4 ba3480e2f9de inside/f
  |
  @  3 4e5edd526618 inside/f
  |
  o  2 81e7e07b7ab0 outside/f
  |
  o  1 8cd66ca966b4 inside/f
  |
  o  0 c8057d6f53ab inside/f inside2/f outside/f
  
  $ hg pull ssh://user@dummy/narrow2
  pulling from ssh://user@dummy/narrow2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 0 files
  new changesets d78a96df731d
  (run 'hg update' to get a working copy)

Check that the resulting history is valid in the full repo

  $ cd ../narrow2
  $ hg push ssh://user@dummy/master
  pushing to ssh://user@dummy/master
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 4 changesets with 4 changes to 2 files
  $ cd ../master
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 8 changesets with 10 changes to 3 files

Can not push to wider repo if change affects paths in wider repo that are
not also in narrower repo
  $ cd ../master
  $ hg co -r 'desc("inside2 4")'
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo 5 > inside2/f
  $ hg ci -m 'inside2 5'
  $ hg log -G -T '{rev} {node|short} {files}\n'
  @  8 5970befb64ba inside2/f
  |
  o  7 d78a96df731d inside2/f
  |
  o  6 8c26f5218962 inside2/f
  |
  o  5 ba3480e2f9de inside/f
  |
  o  4 4e5edd526618 inside/f
  |
  o  3 81e7e07b7ab0 outside/f
  |
  o  2 f3993b8c0c2b inside2/f
  |
  o  1 8cd66ca966b4 inside/f
  |
  o  0 c8057d6f53ab inside/f inside2/f outside/f
  
  $ cd ../narrow
  $ hg pull
  pulling from ssh://user@dummy/master
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 0 files
  new changesets * (glob)
  (run 'hg update' to get a working copy)
TODO: this should tell the user that their narrow clone does not have the
necessary content to be able to push to the target
  $ hg push ssh://user@dummy/narrow2
  pushing to ssh://user@dummy/narrow2
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 0 changes to 0 files