annotate tests/test-sparse.t @ 41685:b81ecf3571d5

addremove: respect ui.relative-paths

I previously changed these code paths while trying to not change any
behavior to avoid inconsistencies between them in the intermediate
commits. They're now all ready to be switched over to respecting
ui.relative-paths.

Differential Revision: https://phab.mercurial-scm.org/D5936

test sparse

  $ hg init myrepo
  $ cd myrepo
  $ cat > .hg/hgrc <<EOF
  > [extensions]
  > sparse=
  > strip=
  > EOF

  $ echo a > show
  $ echo x > hide
  $ hg ci -Aqm 'initial'

  $ echo b > show
  $ echo y > hide
  $ echo aa > show2
  $ echo xx > hide2
  $ hg ci -Aqm 'two'

Verify basic --include

  $ hg up -q 0
  $ hg debugsparse --include 'hide'
  $ ls
  hide

Absolute paths outside the repo should just be rejected

#if no-windows
  $ hg debugsparse --include /foo/bar
  abort: paths cannot be absolute
  [255]
  $ hg debugsparse --include '$TESTTMP/myrepo/hide'

  $ hg debugsparse --include '/root'
  abort: paths cannot be absolute
  [255]
#else
TODO: See if this can be made to fail the same way as on Unix
  $ hg debugsparse --include /c/foo/bar
  abort: paths cannot be absolute
  [255]
  $ hg debugsparse --include '$TESTTMP/myrepo/hide'

  $ hg debugsparse --include '/c/root'
  abort: paths cannot be absolute
  [255]
#endif

Paths should be treated as cwd-relative, not repo-root-relative
  $ mkdir subdir && cd subdir
  $ hg debugsparse --include path
  $ hg debugsparse
  [include]
  $TESTTMP/myrepo/hide
  hide
  subdir/path
  
  $ cd ..
  $ echo hello > subdir/file2.ext
  $ cd subdir
  $ hg debugsparse --include '**.ext'  # let us test globs
  $ hg debugsparse --include 'path:abspath'  # and a path: pattern
  $ cd ..
  $ hg debugsparse
  [include]
  $TESTTMP/myrepo/hide
  hide
  path:abspath
  subdir/**.ext
  subdir/path
  
  $ rm -rf subdir

Verify commiting while sparse includes other files

  $ echo z > hide
  $ hg ci -Aqm 'edit hide'
  $ ls
  hide
  $ hg manifest
  hide
  show

Verify --reset brings files back

  $ hg debugsparse --reset
  $ ls
  hide
  show
  $ cat hide
  z
  $ cat show
  a

Verify 'hg debugsparse' default output

  $ hg up -q null
  $ hg debugsparse --include 'show*'

  $ hg debugsparse
  [include]
  show*
  
Verify update only writes included files

  $ hg up -q 0
  $ ls
  show

  $ hg up -q 1
  $ ls
  show
  show2

Verify status only shows included files

  $ touch hide
  $ touch hide3
  $ echo c > show
  $ hg status
  M show

Adding an excluded file should fail

  $ hg add hide3
  abort: cannot add 'hide3' - it is outside the sparse checkout
  (include file with `hg debugsparse --include <pattern>` or use `hg add -s <file>` to include file directory while adding)
  [255]

But adding a truly excluded file shouldn't count

  $ hg add hide3 -X hide3

Verify deleting sparseness while a file has changes fails

  $ hg debugsparse --delete 'show*'
  pending changes to 'hide'
  abort: cannot change sparseness due to pending changes (delete the files or use --force to bring them back dirty)
  [255]

Verify deleting sparseness with --force brings back files

  $ hg debugsparse --delete -f 'show*'
  pending changes to 'hide'
  $ ls
  hide
  hide2
  hide3
  show
  show2
  $ hg st
  M hide
  M show
  ? hide3

Verify editing sparseness fails if pending changes

  $ hg debugsparse --include 'show*'
  pending changes to 'hide'
  abort: could not update sparseness due to pending changes
  [255]

Verify adding sparseness hides files

  $ hg debugsparse --exclude -f 'hide*'
  pending changes to 'hide'
  $ ls
  hide
  hide3
  show
  show2
  $ hg st
  M show

  $ hg up -qC .
TODO: add an option to purge to also purge files outside the sparse config?
  $ hg purge --all --config extensions.purge=
  $ ls
  hide
  hide3
  show
  show2
For now, manually remove the files
  $ rm hide hide3

Verify rebase temporarily includes excluded files

  $ hg rebase -d 1 -r 2 --config extensions.rebase=
  rebasing 2:b91df4f39e75 "edit hide" (tip)
  temporarily included 2 file(s) in the sparse checkout for merging
  merging hide
  warning: conflicts while merging hide! (edit, then use 'hg resolve --mark')
  unresolved conflicts (see hg resolve, then hg rebase --continue)
  [1]

  $ hg debugsparse
  [exclude]
  hide*
  
  Temporarily Included Files (for merge/rebase):
  hide

  $ cat hide
  <<<<<<< dest:   39278f7c08a9 - test: two
  y
  =======
  z
  >>>>>>> source: b91df4f39e75 - test: edit hide

Verify aborting a rebase cleans up temporary files

  $ hg rebase --abort --config extensions.rebase=
  cleaned up 1 temporarily added file(s) from the sparse checkout
  rebase aborted
  $ rm hide.orig

  $ ls
  show
  show2

Verify merge fails if merging excluded files

  $ hg up -q 1
  $ hg merge -r 2
  temporarily included 2 file(s) in the sparse checkout for merging
  merging hide
  warning: conflicts while merging hide! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg debugsparse
  [exclude]
  hide*
  
  Temporarily Included Files (for merge/rebase):
  hide

  $ hg up -C .
  cleaned up 1 temporarily added file(s) from the sparse checkout
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg debugsparse
  [exclude]
  hide*
  

Verify strip -k resets dirstate correctly

  $ hg status
  $ hg debugsparse
  [exclude]
  hide*
  
  $ hg log -r . -T '{rev}\n' --stat
  1
   hide  |  2 +-
   hide2 |  1 +
   show  |  2 +-
   show2 |  1 +
   4 files changed, 4 insertions(+), 2 deletions(-)
  
  $ hg strip -r . -k
  saved backup bundle to $TESTTMP/myrepo/.hg/strip-backup/39278f7c08a9-ce59e002-backup.hg
  $ hg status
  M show
  ? show2

Verify rebase succeeds if all changed files are in sparse checkout

  $ hg commit -Aqm "add show2"
  $ hg rebase -d 1 --config extensions.rebase=
  rebasing 2:bdde55290160 "add show2" (tip)
  saved backup bundle to $TESTTMP/myrepo/.hg/strip-backup/bdde55290160-216ed9c6-rebase.hg

Verify log --sparse only shows commits that affect the sparse checkout

  $ hg log -T '{rev} '
  2 1 0  (no-eol)
  $ hg log --sparse -T '{rev} '
  2 0  (no-eol)

Test status on a file in a subdir

  $ mkdir -p dir1/dir2
  $ touch dir1/dir2/file
  $ hg debugsparse -I dir1/dir2
  $ hg status
  ? dir1/dir2/file

Mix files and subdirectories, both "glob:" and unprefixed

  $ hg debugsparse --reset
  $ touch dir1/notshown
  $ hg commit -A dir1/notshown -m "notshown"
  $ hg debugsparse --include 'dir1/dir2'
  $ "$PYTHON" $TESTDIR/list-tree.py . | egrep -v '\.[\/]\.hg'
  ./
  ./dir1/
  ./dir1/dir2/
  ./dir1/dir2/file
  ./hide.orig
  $ hg debugsparse --delete 'dir1/dir2'
  $ hg debugsparse --include 'glob:dir1/dir2'
  $ "$PYTHON" $TESTDIR/list-tree.py . | egrep -v '\.[\/]\.hg'
  ./
  ./dir1/
  ./dir1/dir2/
  ./dir1/dir2/file
  ./hide.orig

Test that add -s adds dirs to sparse profile

  $ hg debugsparse --reset
  $ hg debugsparse --include empty
  $ hg debugsparse
  [include]
  empty
  

  $ mkdir add
  $ touch add/foo
  $ touch add/bar
  $ hg add add/foo
  abort: cannot add 'add/foo' - it is outside the sparse checkout
  (include file with `hg debugsparse --include <pattern>` or use `hg add -s <file>` to include file directory while adding)
  [255]
  $ hg add -s add/foo
  $ hg st
  A add/foo
  ? add/bar
  $ hg debugsparse
  [include]
  add
  empty
  
  $ hg add -s add/*
  add/foo already tracked!
  $ hg st
  A add/bar
  A add/foo
  $ hg debugsparse
  [include]
  add
  empty
  

  $ cd ..

Test non-sparse repos work while sparse is loaded
  $ hg init sparserepo
  $ hg init nonsparserepo
  $ cd sparserepo
  $ cat > .hg/hgrc <<EOF
  > [extensions]
  > sparse=
  > EOF
  $ cd ../nonsparserepo
  $ echo x > x && hg add x && hg commit -qAm x
  $ cd ../sparserepo
  $ hg clone ../nonsparserepo ../nonsparserepo2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Test debugrebuilddirstate
  $ cd ../sparserepo
  $ touch included
  $ touch excluded
  $ hg add included excluded
  $ hg commit -m 'a commit' -q
  $ cp .hg/dirstate ../dirstateboth
  $ hg debugsparse -X excluded
  $ cp ../dirstateboth .hg/dirstate
  $ hg debugrebuilddirstate
  $ hg debugdirstate
  n   0         -1 unset               included

Test debugdirstate --minimal where file is in the parent manifest but not the
dirstate
  $ hg debugsparse -X included
  $ hg debugdirstate
  $ cp .hg/dirstate ../dirstateallexcluded
  $ hg debugsparse --reset
  $ hg debugsparse -X excluded
  $ cp ../dirstateallexcluded .hg/dirstate
  $ touch includedadded
  $ hg add includedadded
  $ hg debugdirstate --no-dates
  a   0         -1 unset               includedadded
  $ hg debugrebuilddirstate --minimal
  $ hg debugdirstate --no-dates
  n   0         -1 unset               included
  a   0         -1 * includedadded (glob)

Test debugdirstate --minimal where a file is not in parent manifest
but in the dirstate. This should take into account excluded files in the
manifest
  $ cp ../dirstateboth .hg/dirstate
  $ touch includedadded
  $ hg add includedadded
  $ touch excludednomanifest
  $ hg add excludednomanifest
  $ cp .hg/dirstate ../moreexcluded
  $ hg forget excludednomanifest
  $ rm excludednomanifest
  $ hg debugsparse -X excludednomanifest
  $ cp ../moreexcluded .hg/dirstate
  $ hg manifest
  excluded
  included
We have files in the dirstate that are included and excluded. Some are in the
manifest and some are not.
  $ hg debugdirstate --no-dates
  n 644          0 * excluded (glob)
  a   0         -1 * excludednomanifest (glob)
  n 644          0 * included (glob)
  a   0         -1 * includedadded (glob)
  $ hg debugrebuilddirstate --minimal
  $ hg debugdirstate --no-dates
  n 644          0 * included (glob)
  a   0         -1 * includedadded (glob)