annotate mercurial/simplemerge.py @ 26755:bb0b955d050d

streamclone: support for producing and consuming stream clone bundles

Up to this point, stream clones only existed as a dynamically generated
data format produced and consumed during streaming clones. In order to
support this efficient cloning format with the clone bundles feature, we
need a more formal, on disk representation of the streaming clone data.

This patch introduces a new "bundle" type for streaming clones. Unlike
existing bundles, it does not contain changegroup data. It does,
however, share the same concepts like the 4 byte header which identifies
the type of data that follows and the 2 byte abbreviation for
compression types (of which only "UN" is currently supported).

The new bundle format is essentially the existing stream clone version 1
data format with some headers at the beginning.

Content negotiation at stream clone request time checked for repository
format/requirements compatibility before initiating a stream clone. We
can't do active content negotiation when using clone bundles. So, we put
this set of requirements inside the payload so consumers have a built-in
mechanism for checking compatibility before reading and applying lots of
data. Of course, we will also advertise this requirements set in clone
bundles. But that's for another patch.

We currently don't have a mechanism to produce and consume this new
bundle format. This will be implemented in upcoming patches.

It's worth noting that if a legacy client attempts to `hg unbundle` a
stream clone bundle (with the "HGS1" header), it will abort with:
"unknown bundle version S1," which seems appropriate.

# Copyright (C) 2004, 2005 Canonical Ltd
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see <http://www.gnu.org/licenses/>.

# mbp: "you know that thing where cvs gives you conflict markers?"
# s: "i hate that."

from __future__ import absolute_import

import os
import sys

from .i18n import _
from . import (
    error,
    mdiff,
    scmutil,
    util,
)

class CantReprocessAndShowBase(Exception):
    pass

def intersect(ra, rb):
    """Given two ranges return the range where they intersect or None.

    >>> intersect((0, 10), (0, 6))
    (0, 6)
    >>> intersect((0, 10), (5, 15))
    (5, 10)
    >>> intersect((0, 10), (10, 15))
    >>> intersect((0, 9), (10, 15))
    >>> intersect((0, 9), (7, 15))
    (7, 9)
    """
    assert ra[0] <= ra[1]
    assert rb[0] <= rb[1]

    sa = max(ra[0], rb[0])
    sb = min(ra[1], rb[1])
    if sa < sb:
        return sa, sb
    else:
        return None

def compare_range(a, astart, aend, b, bstart, bend):
    """Compare a[astart:aend] == b[bstart:bend], without slicing.
    """
    if (aend - astart) != (bend - bstart):
        return False
    for ia, ib in zip(xrange(astart, aend), xrange(bstart, bend)):
        if a[ia] != b[ib]:
            return False
    else:
        return True

class Merge3Text(object):
    """3-way merge of texts.

    Given strings BASE, OTHER, THIS, tries to produce a combined text
    incorporating the changes from both BASE->OTHER and BASE->THIS."""
    def __init__(self, basetext, atext, btext, base=None, a=None, b=None):
        self.basetext = basetext
        self.atext = atext
        self.btext = btext
        if base is None:
            base = mdiff.splitnewlines(basetext)
        if a is None:
            a = mdiff.splitnewlines(atext)
        if b is None:
            b = mdiff.splitnewlines(btext)
        self.base = base
        self.a = a
        self.b = b

    def merge_lines(self,
                    name_a=None,
                    name_b=None,
                    name_base=None,
                    start_marker='<<<<<<<',
                    mid_marker='=======',
                    end_marker='>>>>>>>',
                    base_marker=None,
                    localorother=None):
        """Return merge in cvs-like form.
        """
        self.conflicts = False
        newline = '\n'
        if len(self.a) > 0:
            if self.a[0].endswith('\r\n'):
                newline = '\r\n'
            elif self.a[0].endswith('\r'):
                newline = '\r'
        if name_a and start_marker:
            start_marker = start_marker + ' ' + name_a
        if name_b and end_marker:
            end_marker = end_marker + ' ' + name_b
        if name_base and base_marker:
            base_marker = base_marker + ' ' + name_base
        merge_regions = self.merge_regions()
        for t in merge_regions:
            what = t[0]
            if what == 'unchanged':
                for i in range(t[1], t[2]):
                    yield self.base[i]
            elif what == 'a' or what == 'same':
                for i in range(t[1], t[2]):
                    yield self.a[i]
            elif what == 'b':
                for i in range(t[1], t[2]):
                    yield self.b[i]
            elif what == 'conflict':
                if localorother == 'local':
                    for i in range(t[3], t[4]):
                        yield self.a[i]
                elif localorother == 'other':
                    for i in range(t[5], t[6]):
                        yield self.b[i]
                else:
                    self.conflicts = True
                    if start_marker is not None:
                        yield start_marker + newline
                    for i in range(t[3], t[4]):
                        yield self.a[i]
                    if base_marker is not None:
                        yield base_marker + newline
                        for i in range(t[1], t[2]):
                            yield self.base[i]
                    if mid_marker is not None:
                        yield mid_marker + newline
                    for i in range(t[5], t[6]):
                        yield self.b[i]
                    if end_marker is not None:
                        yield end_marker + newline
            else:
                raise ValueError(what)

    def merge_groups(self):
        """Yield sequence of line groups.  Each one is a tuple:

        'unchanged', lines
             Lines unchanged from base

        'a', lines
             Lines taken from a

        'same', lines
             Lines taken from a (and equal to b)

        'b', lines
             Lines taken from b

        'conflict', base_lines, a_lines, b_lines
             Lines from base were changed to either a or b and conflict.
        """
        for t in self.merge_regions():
            what = t[0]
            if what == 'unchanged':
                yield what, self.base[t[1]:t[2]]
            elif what == 'a' or what == 'same':
                yield what, self.a[t[1]:t[2]]
            elif what == 'b':
                yield what, self.b[t[1]:t[2]]
            elif what == 'conflict':
                yield (what,
                       self.base[t[1]:t[2]],
                       self.a[t[3]:t[4]],
                       self.b[t[5]:t[6]])
            else:
                raise ValueError(what)

    def merge_regions(self):
        """Return sequences of matching and conflicting regions.

        This returns tuples, where the first value says what kind we
        have:

        'unchanged', start, end
             Take a region of base[start:end]

        'same', astart, aend
             b and a are different from base but give the same result

        'a', start, end
             Non-clashing insertion from a[start:end]

        Method is as follows:

        The two sequences align only on regions which match the base
        and both descendants.  These are found by doing a two-way diff
        of each one against the base, and then finding the
        intersections between those regions.  These "sync regions"
        are by definition unchanged in both and easily dealt with.

        The regions in between can be in any of three cases:
        conflicted, or changed on only one side.
        """

        # section a[0:ia] has been disposed of, etc
        iz = ia = ib = 0

        for region in self.find_sync_regions():
            zmatch, zend, amatch, aend, bmatch, bend = region
            #print 'match base [%d:%d]' % (zmatch, zend)

            matchlen = zend - zmatch
            assert matchlen >= 0
            assert matchlen == (aend - amatch)
            assert matchlen == (bend - bmatch)

            len_a = amatch - ia
            len_b = bmatch - ib
            len_base = zmatch - iz
            assert len_a >= 0
            assert len_b >= 0
            assert len_base >= 0

            #print 'unmatched a=%d, b=%d' % (len_a, len_b)

            if len_a or len_b:
                # try to avoid actually slicing the lists
                equal_a = compare_range(self.a, ia, amatch,
                                        self.base, iz, zmatch)
                equal_b = compare_range(self.b, ib, bmatch,
                                        self.base, iz, zmatch)
                same = compare_range(self.a, ia, amatch,
                                     self.b, ib, bmatch)

                if same:
                    yield 'same', ia, amatch
                elif equal_a and not equal_b:
                    yield 'b', ib, bmatch
                elif equal_b and not equal_a:
                    yield 'a', ia, amatch
                elif not equal_a and not equal_b:
                    yield 'conflict', iz, zmatch, ia, amatch, ib, bmatch
                else:
                    raise AssertionError("can't handle a=b=base but unmatched")

                ia = amatch
                ib = bmatch
            iz = zmatch

            # if the same part of the base was deleted on both sides
            # that's OK, we can just skip it.


            if matchlen > 0:
                assert ia == amatch
                assert ib == bmatch
                assert iz == zmatch

                yield 'unchanged', zmatch, zend
                iz = zend
                ia = aend
                ib = bend

    def find_sync_regions(self):
        """Return a list of sync regions, where both descendants match the base.

        Generates a list of (base1, base2, a1, a2, b1, b2).  There is
        always a zero-length sync region at the end of all the files.
        """

        ia = ib = 0
        amatches = mdiff.get_matching_blocks(self.basetext, self.atext)
        bmatches = mdiff.get_matching_blocks(self.basetext, self.btext)
        len_a = len(amatches)
        len_b = len(bmatches)

        sl = []

        while ia < len_a and ib < len_b:
            abase, amatch, alen = amatches[ia]
            bbase, bmatch, blen = bmatches[ib]

            # there is an unconflicted block at i; how long does it
            # extend?  until whichever one ends earlier.
            i = intersect((abase, abase + alen), (bbase, bbase + blen))
            if i:
                intbase = i[0]
                intend = i[1]
                intlen = intend - intbase

                # found a match of base[i[0], i[1]]; this may be less than
                # the region that matches in either one
                assert intlen <= alen
                assert intlen <= blen
                assert abase <= intbase
                assert bbase <= intbase

                asub = amatch + (intbase - abase)
                bsub = bmatch + (intbase - bbase)
                aend = asub + intlen
                bend = bsub + intlen

                assert self.base[intbase:intend] == self.a[asub:aend], \
                       (self.base[intbase:intend], self.a[asub:aend])

                assert self.base[intbase:intend] == self.b[bsub:bend]

                sl.append((intbase, intend,
                           asub, aend,
                           bsub, bend))

            # advance whichever one ends first in the base text
            if (abase + alen) < (bbase + blen):
                ia += 1
            else:
                ib += 1

        intbase = len(self.base)
        abase = len(self.a)
        bbase = len(self.b)
        sl.append((intbase, intbase, abase, abase, bbase, bbase))

        return sl

    def find_unconflicted(self):
        """Return a list of ranges in base that are not conflicted."""
        am = mdiff.get_matching_blocks(self.basetext, self.atext)
        bm = mdiff.get_matching_blocks(self.basetext, self.btext)

        unc = []

        while am and bm:
            # there is an unconflicted block at i; how long does it
            # extend?  until whichever one ends earlier.
            a1 = am[0][0]
            a2 = a1 + am[0][2]
            b1 = bm[0][0]
            b2 = b1 + bm[0][2]
            i = intersect((a1, a2), (b1, b2))
            if i:
                unc.append(i)

            if a2 < b2:
                del am[0]
            else:
                del bm[0]

        return unc

def simplemerge(ui, local, base, other, **opts):
    def readfile(filename):
        f = open(filename, "rb")
        text = f.read()
        f.close()
        if util.binary(text):
            msg = _("%s looks like a binary file.") % filename
            if not opts.get('quiet'):
                ui.warn(_('warning: %s\n') % msg)
            if not opts.get('text'):
                raise error.Abort(msg)
        return text

    mode = opts.get('mode','merge')
    if mode == 'union':
        name_a = None
        name_b = None
        name_base = None
    else:
        name_a = local
        name_b = other
        name_base = None
        labels = opts.get('label', [])
        if len(labels) > 0:
            name_a = labels[0]
        if len(labels) > 1:
            name_b = labels[1]
        if len(labels) > 2:
            name_base = labels[2]
        if len(labels) > 3:
            raise error.Abort(_("can only specify three labels."))

    try:
        localtext = readfile(local)
        basetext = readfile(base)
        othertext = readfile(other)
    except error.Abort:
        return 1

    local = os.path.realpath(local)
    if not opts.get('print'):
        opener = scmutil.opener(os.path.dirname(local))
        out = opener(os.path.basename(local), "w", atomictemp=True)
    else:
        out = sys.stdout

    m3 = Merge3Text(basetext, localtext, othertext)
    extrakwargs = {"localorother": opts.get("localorother", None)}
    if mode == 'union':
        extrakwargs['start_marker'] = None
        extrakwargs['mid_marker'] = None
        extrakwargs['end_marker'] = None
    elif name_base is not None:
        extrakwargs['base_marker'] = '|||||||'
        extrakwargs['name_base'] = name_base
    for line in m3.merge_lines(name_a=name_a, name_b=name_b, **extrakwargs):
        out.write(line)

    if not opts.get('print'):
        out.close()

    if m3.conflicts and not mode == 'union':
        return 1