annotate tests/test-exchange-obsmarkers-case-A1.t @ 34038:bc2535238de2

import-checker: allow relative import a module being checked

This would make the checker more friendly for 3rd-party code. For example,

In remotefilelog/x.py, it may have:

    from . import shallowutils

That could trigger "relative import of stdlib module" if
"remotefilelog" was installed in the system. If the module being checked
conflicts with the system module, it makes sense to not treat that module as
system module. This patch makes it so.

Differential Revision: https://phab.mercurial-scm.org/D552

============================================
Testing obsolescence markers push: Cases A.1
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category A: simple cases
TestCase 1: pushing a single head
Subcases:
# A.1.1 pushing a single head (2 variants)
# A.1.2 pushing multiple changesets into a single head (2 variants)

Case: A.1.1 pushing a single head
=================================
..
.. {{{
..     ⇠◔ A
..      |
..      ● O
.. }}}
..
.. Marker exists from:
..
..  * A
..
.. Commands run:
..
..  * hg push -r A
..  * hg push
..
.. Expected exchange:
..
..  * chain from A

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

initial

  $ setuprepos A.1.1
  creating test repo for test case A.1.1
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A
  $ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa `getid 'desc(A)'`
  $ hg log -G
  @  f5bc6836db60 (draft): A
  |
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

setup both variants

  $ cp -R A.1.1 A.1.1.a
  $ cp -R A.1.1 A.1.1.b

Variant a: push -r A
--------------------

  $ dotest A.1.1.a A
  ## Running testcase A.1.1.a
  # testing echange of "A" (f5bc6836db60)
  ## initial state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "A" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "f5bc6836db60" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  1 new obsolescence markers
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

Variant b: push
---------------

  $ dotest A.1.1.b
  ## Running testcase A.1.1.b
  ## initial state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  1 new obsolescence markers
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

A.1.2 pushing multiple changesets into a single head
====================================================

.. {{{
..      ◔ B
..      |
..     ⇠◔ A
..      |
..      ● O
.. }}}
..
.. Marker exist from:
..
..  * A
..
.. Command run:
..
..  * hg push -r B
..  * hg push
..
.. Expected exchange:
..
..  * chain from A

Setup
-----

initial

  $ setuprepos A.1.2
  creating test repo for test case A.1.2
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A
  $ mkcommit B
  $ hg log -G
  @  f6fbb35d8ac9 (draft): B
  |
  o  f5bc6836db60 (draft): A
  |
  o  a9bdc8b26820 (public): O
  
  $ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa `getid 'desc(A)'`
  $ inspect_obsmarkers
  obsstore content
  ================
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

setup both variants

  $ cp -R A.1.2 A.1.2.a
  $ cp -R A.1.2 A.1.2.b

Variant a: push -r A
--------------------

  $ dotest A.1.2.a B
  ## Running testcase A.1.2.a
  # testing echange of "B" (f6fbb35d8ac9)
  ## initial state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "B" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 2 changesets with 2 changes to 2 files
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "f6fbb35d8ac9" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  1 new obsolescence markers
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

Variant b: push
---------------

  $ dotest A.1.2.b
  ## Running testcase A.1.2.b
  ## initial state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 2 changesets with 2 changes to 2 files
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  1 new obsolescence markers
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}