annotate tests/test-copies-in-changeset.t @ 43198:c16fe77e340a

pathcopies: give up any optimization based on `introrev`

Between 8a0136f69027 and d98fb3f42f33, we sped up the search for the
introduction revision during path copies. However, further checking show that
finding the introduction revision is still expensive and that we are better off
without it. So we simply drop it and only rely on the linkrev optimisation.

I ran `perfpathcopies` on 6989 pair of revision in the pypy
repository (`hg perfhelper-pathcopies`. The result is massively in favor of
dropping this condition. The result of the copy tracing are unchanged.

Attempt to use a smaller changes preserving linkrev usage were unsuccessful, it
can return wrong result. The following changesets broke test-mv-cp-st-diff.t

    -        if not f.isintroducedafter(limit):
    +        if limit >= 0 and f.linkrev() < limit:
                 return None


Here are various numbers (before this changeset/after this changesets)

            source       destination  before      after    saved-time  ratio
worth cases e66f24650daf 695dfb0f493b 1.062843 1.246369 -0.183526 1.172675
            c979853a3b6a 8d60fe293e79 1.036985 1.196414 -0.159429 1.153743
            22349fa2fc33 fbb1c9fd86c0 0.879926 1.038682 -0.158756 1.180420
            682b98f3e672 a4878080a536 0.909952 1.063801 -0.153849 1.169074
            5adabc9b9848 920958a93997 0.993622 1.147452 -0.153830 1.154817
worse  1%   dbfbfcf077e9 aea8f2fd3593 1.016595 1.082999 -0.066404 1.065320
worse  5%   c95f1ced15f2 7d29d5e39734 0.453694 0.471156 -0.017462 1.038488
worse 10%   3e144ed1d5b7 2aef0e942480 0.035140 0.037535 -0.002395 1.068156
worse 25%   321fc60db035 801748ba582a 0.009267 0.009325 -0.000058 1.006259
median      2088ce763fc2 e6991321d78b 0.000665 0.000651 0.000014 0.978947
best 25%    915631a97de6 385b31354be6 0.040743 0.040363 0.000380 0.990673
best 10%    ad495c36a765 19c10384d3e7 0.431658 0.411490 0.020168 0.953278
best  5%    d13ae7d283ae 813c99f810ac 1.141404 1.075346 0.066058 0.942126
best  1%    81593cb4a496 99ae11866969 1.833297 0.063823 1.769474 0.034813
best cases  c3b14617fbd7 743a0fcaa4eb 1101.811740 2.735970 1099.075770 0.002483
            c3b14617fbd7 9ba6ab77fd29 1116.753953 2.800729 1113.953224 0.002508
            058b99d6e81f 57e249b7a3ea 1246.128485 3.042762 1243.085723 0.002442
            9a8c361aab49 0354a250d371 1253.111894 3.085796 1250.026098 0.002463
            442dbbc53c68 3ec1002a818c 1261.786294 3.138607 1258.647687 0.002487


As one can see, the average case is not really impacted. However, the worth case
we get after this changeset are much better than the one we had before it. We
have 30 pairs where improvements are above 10 minutes.

This reflect in the combined time for all pairs
before: 26256s
after:   1300s (-95%)

If we remove these pathological 30 cases, we still see a significant improvements:
before:  1631s
after:   1245s (-24%)

#testcases extra sidedata

#if extra
  $ cat >> $HGRCPATH << EOF
  > [experimental]
  > copies.write-to=changeset-only
  > copies.read-from=changeset-only
  > [alias]
  > changesetcopies = log -r . -T 'files: {files}
  >   {extras % "{ifcontains("files", key, "{key}: {value}\n")}"}
  >   {extras % "{ifcontains("copies", key, "{key}: {value}\n")}"}'
  > EOF
#endif

#if sidedata
  $ cat >> $HGRCPATH << EOF
  > [format]
  > exp-use-copies-side-data-changeset = yes
  > EOF
#endif

  $ cat >> $HGRCPATH << EOF
  > [alias]
  > showcopies = log -r . -T '{file_copies % "{source} -> {name}\n"}'
  > [extensions]
  > rebase =
  > split =
  > EOF

Check that copies are recorded correctly

  $ hg init repo
  $ cd repo
#if sidedata
  $ hg debugformat -v
  format-variant    repo config default
  fncache:           yes    yes     yes
  dotencode:         yes    yes     yes
  generaldelta:      yes    yes     yes
  sparserevlog:      yes    yes     yes
  sidedata:          yes    yes      no
  copies-sdc:        yes    yes      no
  plain-cl-delta:    yes    yes     yes
  compression:       zlib   zlib    zlib
  compression-level: default default default
#else
  $ hg debugformat -v
  format-variant    repo config default
  fncache:           yes    yes     yes
  dotencode:         yes    yes     yes
  generaldelta:      yes    yes     yes
  sparserevlog:      yes    yes     yes
  sidedata:           no     no      no
  copies-sdc:         no     no      no
  plain-cl-delta:    yes    yes     yes
  compression:       zlib   zlib    zlib
  compression-level: default default default
#endif
  $ echo a > a
  $ hg add a
  $ hg ci -m initial
  $ hg cp a b
  $ hg cp a c
  $ hg cp a d
  $ hg ci -m 'copy a to b, c, and d'

#if extra

  $ hg changesetcopies
  files: b c d
  filesadded: 0
  1
  2
  
  p1copies: 0\x00a (esc)
  1\x00a (esc)
  2\x00a (esc)
#else
  $ hg debugsidedata -c -v -- -1
  4 sidedata entries
   entry-0010 size 11
    '0\x00a\n1\x00a\n2\x00a'
   entry-0011 size 0
    ''
   entry-0012 size 5
    '0\n1\n2'
   entry-0013 size 0
    ''
#endif

  $ hg showcopies
  a -> b
  a -> c
  a -> d

#if extra

  $ hg showcopies --config experimental.copies.read-from=compatibility
  a -> b
  a -> c
  a -> d
  $ hg showcopies --config experimental.copies.read-from=filelog-only

#endif

Check that renames are recorded correctly

  $ hg mv b b2
  $ hg ci -m 'rename b to b2'

#if extra

  $ hg changesetcopies
  files: b b2
  filesadded: 1
  filesremoved: 0
  
  p1copies: 1\x00b (esc)

#else
  $ hg debugsidedata -c -v -- -1
  4 sidedata entries
   entry-0010 size 3
    '1\x00b'
   entry-0011 size 0
    ''
   entry-0012 size 1
    '1'
   entry-0013 size 1
    '0'
#endif

  $ hg showcopies
  b -> b2


Rename onto existing file. This should get recorded in the changeset files list and in the extras,
even though there is no filelog entry.

  $ hg cp b2 c --force
  $ hg st --copies
  M c
    b2

#if extra

  $ hg debugindex c
     rev linkrev nodeid       p1           p2
       0       1 b789fdd96dc2 000000000000 000000000000

#else

  $ hg debugindex c
     rev linkrev nodeid       p1           p2
       0       1 37d9b5d994ea 000000000000 000000000000

#endif


  $ hg ci -m 'move b onto d'

#if extra

  $ hg changesetcopies
  files: c
  
  p1copies: 0\x00b2 (esc)

#else
  $ hg debugsidedata -c -v -- -1
  4 sidedata entries
   entry-0010 size 4
    '0\x00b2'
   entry-0011 size 0
    ''
   entry-0012 size 0
    ''
   entry-0013 size 0
    ''
#endif

  $ hg showcopies
  b2 -> c

#if extra

  $ hg debugindex c
     rev linkrev nodeid       p1           p2
       0       1 b789fdd96dc2 000000000000 000000000000

#else

  $ hg debugindex c
     rev linkrev nodeid       p1           p2
       0       1 37d9b5d994ea 000000000000 000000000000
       1       3 029625640347 000000000000 000000000000

#endif

Create a merge commit with copying done during merge.

  $ hg co 0
  0 files updated, 0 files merged, 3 files removed, 0 files unresolved
  $ hg cp a e
  $ hg cp a f
  $ hg ci -m 'copy a to e and f'
  created new head
  $ hg merge 3
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
File 'a' exists on both sides, so 'g' could be recorded as being from p1 or p2, but we currently
always record it as being from p1
  $ hg cp a g
File 'd' exists only in p2, so 'h' should be from p2
  $ hg cp d h
File 'f' exists only in p1, so 'i' should be from p1
  $ hg cp f i
  $ hg ci -m 'merge'

#if extra

  $ hg changesetcopies
  files: g h i
  filesadded: 0
  1
  2
  
  p1copies: 0\x00a (esc)
  2\x00f (esc)
  p2copies: 1\x00d (esc)

#else
  $ hg debugsidedata -c -v -- -1
  4 sidedata entries
   entry-0010 size 7
    '0\x00a\n2\x00f'
   entry-0011 size 3
    '1\x00d'
   entry-0012 size 5
    '0\n1\n2'
   entry-0013 size 0
    ''
#endif

  $ hg showcopies
  a -> g
  d -> h
  f -> i

Test writing to both changeset and filelog

  $ hg cp a j
#if extra
  $ hg ci -m 'copy a to j' --config experimental.copies.write-to=compatibility
  $ hg changesetcopies
  files: j
  filesadded: 0
  filesremoved: 
  
  p1copies: 0\x00a (esc)
  p2copies: 
#else
  $ hg ci -m 'copy a to j'
  $ hg debugsidedata -c -v -- -1
  4 sidedata entries
   entry-0010 size 3
    '0\x00a'
   entry-0011 size 0
    ''
   entry-0012 size 1
    '0'
   entry-0013 size 0
    ''
#endif
  $ hg debugdata j 0
  \x01 (esc)
  copy: a
  copyrev: b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3
  \x01 (esc)
  a
  $ hg showcopies
  a -> j
  $ hg showcopies --config experimental.copies.read-from=compatibility
  a -> j
  $ hg showcopies --config experimental.copies.read-from=filelog-only
  a -> j
Existing copy information in the changeset gets removed on amend and writing
copy information on to the filelog
#if extra
  $ hg ci --amend -m 'copy a to j, v2' \
  > --config experimental.copies.write-to=filelog-only
  saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-*-amend.hg (glob)
  $ hg changesetcopies
  files: j
  
#else
  $ hg ci --amend -m 'copy a to j, v2'
  saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-*-amend.hg (glob)
  $ hg debugsidedata -c -v -- -1
  4 sidedata entries
   entry-0010 size 3
    '0\x00a'
   entry-0011 size 0
    ''
   entry-0012 size 1
    '0'
   entry-0013 size 0
    ''
#endif
  $ hg showcopies --config experimental.copies.read-from=filelog-only
  a -> j
The entries should be written to extras even if they're empty (so the client
won't have to fall back to reading from filelogs)
  $ echo x >> j
#if extra
  $ hg ci -m 'modify j' --config experimental.copies.write-to=compatibility
  $ hg changesetcopies
  files: j
  filesadded: 
  filesremoved: 
  
  p1copies: 
  p2copies: 
#else
  $ hg ci -m 'modify j'
  $ hg debugsidedata -c -v -- -1
  4 sidedata entries
   entry-0010 size 0
    ''
   entry-0011 size 0
    ''
   entry-0012 size 0
    ''
   entry-0013 size 0
    ''
#endif

Test writing only to filelog

  $ hg cp a k
#if extra
  $ hg ci -m 'copy a to k' --config experimental.copies.write-to=filelog-only

  $ hg changesetcopies
  files: k
  
#else
  $ hg ci -m 'copy a to k'
  $ hg debugsidedata -c -v -- -1
  4 sidedata entries
   entry-0010 size 3
    '0\x00a'
   entry-0011 size 0
    ''
   entry-0012 size 1
    '0'
   entry-0013 size 0
    ''
#endif

  $ hg debugdata k 0
  \x01 (esc)
  copy: a
  copyrev: b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3
  \x01 (esc)
  a
#if extra
  $ hg showcopies

  $ hg showcopies --config experimental.copies.read-from=compatibility
  a -> k
  $ hg showcopies --config experimental.copies.read-from=filelog-only
  a -> k
#else
  $ hg showcopies
  a -> k
#endif

  $ cd ..

Test rebasing a commit with copy information

  $ hg init rebase-rename
  $ cd rebase-rename
  $ echo a > a
  $ hg ci -Aqm 'add a'
  $ echo a2 > a
  $ hg ci -m 'modify a'
  $ hg co -q 0
  $ hg mv a b
  $ hg ci -qm 'rename a to b'
  $ hg rebase -d 1 --config rebase.experimental.inmemory=yes
  rebasing 2:* "rename a to b" (tip) (glob)
  merging a and b to b
  saved backup bundle to $TESTTMP/rebase-rename/.hg/strip-backup/*-*-rebase.hg (glob)
  $ hg st --change . --copies
  A b
    a
  R a
  $ cd ..

Test splitting a commit

  $ hg init split
  $ cd split
  $ echo a > a
  $ echo b > b
  $ hg ci -Aqm 'add a and b'
  $ echo a2 > a
  $ hg mv b c
  $ hg ci -m 'modify a, move b to c'
  $ hg --config ui.interactive=yes split <<EOF
  > y
  > y
  > n
  > y
  > EOF
  diff --git a/a b/a
  1 hunks, 1 lines changed
  examine changes to 'a'?
  (enter ? for help) [Ynesfdaq?] y
  
  @@ -1,1 +1,1 @@
  -a
  +a2
  record this change to 'a'?
  (enter ? for help) [Ynesfdaq?] y
  
  diff --git a/b b/c
  rename from b
  rename to c
  examine changes to 'b' and 'c'?
  (enter ? for help) [Ynesfdaq?] n
  
  created new head
  diff --git a/b b/c
  rename from b
  rename to c
  examine changes to 'b' and 'c'?
  (enter ? for help) [Ynesfdaq?] y
  
  saved backup bundle to $TESTTMP/split/.hg/strip-backup/*-*-split.hg (glob)
  $ cd ..

Test committing half a rename

  $ hg init partial
  $ cd partial
  $ echo a > a
  $ hg ci -Aqm 'add a'
  $ hg mv a b
  $ hg ci -m 'remove a' a

#if sidedata

Test upgrading/downgrading to sidedata storage
==============================================

downgrading (keeping some sidedata)

  $ hg debugformat -v
  format-variant    repo config default
  fncache:           yes    yes     yes
  dotencode:         yes    yes     yes
  generaldelta:      yes    yes     yes
  sparserevlog:      yes    yes     yes
  sidedata:          yes    yes      no
  copies-sdc:        yes    yes      no
  plain-cl-delta:    yes    yes     yes
  compression:       zlib   zlib    zlib
  compression-level: default default default
  $ hg debugsidedata -c -- 0
  4 sidedata entries
   entry-0010 size 0
   entry-0011 size 0
   entry-0012 size 1
   entry-0013 size 0
  $ hg debugsidedata -c -- 1
  4 sidedata entries
   entry-0010 size 0
   entry-0011 size 0
   entry-0012 size 0
   entry-0013 size 1
  $ hg debugsidedata -m -- 0
  $ cat << EOF > .hg/hgrc
  > [format]
  > exp-use-side-data = yes
  > exp-use-copies-side-data-changeset = no
  > EOF
  $ hg debugupgraderepo --run --quiet --no-backup > /dev/null
  $ hg debugformat -v
  format-variant    repo config default
  fncache:           yes    yes     yes
  dotencode:         yes    yes     yes
  generaldelta:      yes    yes     yes
  sparserevlog:      yes    yes     yes
  sidedata:          yes    yes      no
  copies-sdc:         no     no      no
  plain-cl-delta:    yes    yes     yes
  compression:       zlib   zlib    zlib
  compression-level: default default default
  $ hg debugsidedata -c -- 0
  $ hg debugsidedata -c -- 1
  $ hg debugsidedata -m -- 0

upgrading

  $ cat << EOF > .hg/hgrc
  > [format]
  > exp-use-copies-side-data-changeset = yes
  > EOF
  $ hg debugupgraderepo --run --quiet --no-backup > /dev/null
  $ hg debugformat -v
  format-variant    repo config default
  fncache:           yes    yes     yes
  dotencode:         yes    yes     yes
  generaldelta:      yes    yes     yes
  sparserevlog:      yes    yes     yes
  sidedata:          yes    yes      no
  copies-sdc:        yes    yes      no
  plain-cl-delta:    yes    yes     yes
  compression:       zlib   zlib    zlib
  compression-level: default default default
  $ hg debugsidedata -c -- 0
  4 sidedata entries
   entry-0010 size 0
   entry-0011 size 0
   entry-0012 size 1
   entry-0013 size 0
  $ hg debugsidedata -c -- 1
  4 sidedata entries
   entry-0010 size 0
   entry-0011 size 0
   entry-0012 size 0
   entry-0013 size 1
  $ hg debugsidedata -m -- 0

#endif

  $ cd ..