annotate tests/test-copies.t @ 43198:c16fe77e340a

pathcopies: give up any optimization based on `introrev`

Between 8a0136f69027 and d98fb3f42f33, we sped up the search for the
introduction revision during path copies. However, further checking show that
finding the introduction revision is still expensive and that we are better off
without it. So we simply drop it and only rely on the linkrev optimisation.

I ran `perfpathcopies` on 6989 pair of revision in the pypy
repository (`hg perfhelper-pathcopies`. The result is massively in favor of
dropping this condition. The result of the copy tracing are unchanged.

Attempt to use a smaller changes preserving linkrev usage were unsuccessful, it
can return wrong result. The following changesets broke test-mv-cp-st-diff.t

    -        if not f.isintroducedafter(limit):
    +        if limit >= 0 and f.linkrev() < limit:
                 return None


Here are various numbers (before this changeset/after this changesets)

            source       destination  before      after    saved-time  ratio
worth cases e66f24650daf 695dfb0f493b 1.062843 1.246369 -0.183526 1.172675
            c979853a3b6a 8d60fe293e79 1.036985 1.196414 -0.159429 1.153743
            22349fa2fc33 fbb1c9fd86c0 0.879926 1.038682 -0.158756 1.180420
            682b98f3e672 a4878080a536 0.909952 1.063801 -0.153849 1.169074
            5adabc9b9848 920958a93997 0.993622 1.147452 -0.153830 1.154817
worse  1%   dbfbfcf077e9 aea8f2fd3593 1.016595 1.082999 -0.066404 1.065320
worse  5%   c95f1ced15f2 7d29d5e39734 0.453694 0.471156 -0.017462 1.038488
worse 10%   3e144ed1d5b7 2aef0e942480 0.035140 0.037535 -0.002395 1.068156
worse 25%   321fc60db035 801748ba582a 0.009267 0.009325 -0.000058 1.006259
median      2088ce763fc2 e6991321d78b 0.000665 0.000651 0.000014 0.978947
best 25%    915631a97de6 385b31354be6 0.040743 0.040363 0.000380 0.990673
best 10%    ad495c36a765 19c10384d3e7 0.431658 0.411490 0.020168 0.953278
best  5%    d13ae7d283ae 813c99f810ac 1.141404 1.075346 0.066058 0.942126
best  1%    81593cb4a496 99ae11866969 1.833297 0.063823 1.769474 0.034813
best cases  c3b14617fbd7 743a0fcaa4eb 1101.811740 2.735970 1099.075770 0.002483
            c3b14617fbd7 9ba6ab77fd29 1116.753953 2.800729 1113.953224 0.002508
            058b99d6e81f 57e249b7a3ea 1246.128485 3.042762 1243.085723 0.002442
            9a8c361aab49 0354a250d371 1253.111894 3.085796 1250.026098 0.002463
            442dbbc53c68 3ec1002a818c 1261.786294 3.138607 1258.647687 0.002487


As one can see, the average case is not really impacted. However, the worth case
we get after this changeset are much better than the one we had before it. We
have 30 pairs where improvements are above 10 minutes.

This reflect in the combined time for all pairs
before: 26256s
after:   1300s (-95%)

If we remove these pathological 30 cases, we still see a significant improvements:
before:  1631s
after:   1245s (-24%)

#testcases filelog compatibility changeset sidedata

  $ cat >> $HGRCPATH << EOF
  > [extensions]
  > rebase=
  > [alias]
  > l = log -G -T '{rev} {desc}\n{files}\n'
  > EOF

#if compatibility
  $ cat >> $HGRCPATH << EOF
  > [experimental]
  > copies.read-from = compatibility
  > EOF
#endif

#if changeset
  $ cat >> $HGRCPATH << EOF
  > [experimental]
  > copies.read-from = changeset-only
  > copies.write-to = changeset-only
  > EOF
#endif

#if sidedata
  $ cat >> $HGRCPATH << EOF
  > [format]
  > exp-use-copies-side-data-changeset = yes
  > EOF
#endif

  $ REPONUM=0
  $ newrepo() {
  >     cd $TESTTMP
  >     REPONUM=`expr $REPONUM + 1`
  >     hg init repo-$REPONUM
  >     cd repo-$REPONUM
  > }

Simple rename case
  $ newrepo
  $ echo x > x
  $ hg ci -Aqm 'add x'
  $ hg mv x y
  $ hg debugp1copies
  x -> y
  $ hg debugp2copies
  $ hg ci -m 'rename x to y'
  $ hg l
  @  1 rename x to y
  |  x y
  o  0 add x
     x
  $ hg debugp1copies -r 1
  x -> y
  $ hg debugpathcopies 0 1
  x -> y
  $ hg debugpathcopies 1 0
  y -> x
Test filtering copies by path. We do filtering by destination.
  $ hg debugpathcopies 0 1 x
  $ hg debugpathcopies 1 0 x
  y -> x
  $ hg debugpathcopies 0 1 y
  x -> y
  $ hg debugpathcopies 1 0 y

Copies not including commit changes
  $ newrepo
  $ echo x > x
  $ hg ci -Aqm 'add x'
  $ hg mv x y
  $ hg debugpathcopies . .
  $ hg debugpathcopies . 'wdir()'
  x -> y
  $ hg debugpathcopies 'wdir()' .
  y -> x

Copy a file onto another file
  $ newrepo
  $ echo x > x
  $ echo y > y
  $ hg ci -Aqm 'add x and y'
  $ hg cp -f x y
  $ hg debugp1copies
  x -> y
  $ hg debugp2copies
  $ hg ci -m 'copy x onto y'
  $ hg l
  @  1 copy x onto y
  |  y
  o  0 add x and y
     x y
  $ hg debugp1copies -r 1
  x -> y
Incorrectly doesn't show the rename
  $ hg debugpathcopies 0 1

Copy a file onto another file with same content. If metadata is stored in changeset, this does not
produce a new filelog entry. The changeset's "files" entry should still list the file.
  $ newrepo
  $ echo x > x
  $ echo x > x2
  $ hg ci -Aqm 'add x and x2 with same content'
  $ hg cp -f x x2
  $ hg ci -m 'copy x onto x2'
  $ hg l
  @  1 copy x onto x2
  |  x2
  o  0 add x and x2 with same content
     x x2
  $ hg debugp1copies -r 1
  x -> x2
Incorrectly doesn't show the rename
  $ hg debugpathcopies 0 1

Rename file in a loop: x->y->z->x
  $ newrepo
  $ echo x > x
  $ hg ci -Aqm 'add x'
  $ hg mv x y
  $ hg debugp1copies
  x -> y
  $ hg debugp2copies
  $ hg ci -m 'rename x to y'
  $ hg mv y z
  $ hg ci -m 'rename y to z'
  $ hg mv z x
  $ hg ci -m 'rename z to x'
  $ hg l
  @  3 rename z to x
  |  x z
  o  2 rename y to z
  |  y z
  o  1 rename x to y
  |  x y
  o  0 add x
     x
  $ hg debugpathcopies 0 3

Copy x to z, then remove z, then copy x2 (same content as x) to z. With copy metadata in the
changeset, the two copies here will have the same filelog entry, so ctx['z'].introrev() might point
to the first commit that added the file. We should still report the copy as being from x2.
  $ newrepo
  $ echo x > x
  $ echo x > x2
  $ hg ci -Aqm 'add x and x2 with same content'
  $ hg cp x z
  $ hg ci -qm 'copy x to z'
  $ hg rm z
  $ hg ci -m 'remove z'
  $ hg cp x2 z
  $ hg ci -m 'copy x2 to z'
  $ hg l
  @  3 copy x2 to z
  |  z
  o  2 remove z
  |  z
  o  1 copy x to z
  |  z
  o  0 add x and x2 with same content
     x x2
  $ hg debugp1copies -r 3
  x2 -> z
  $ hg debugpathcopies 0 3
  x2 -> z

Create x and y, then rename them both to the same name, but on different sides of a fork
  $ newrepo
  $ echo x > x
  $ echo y > y
  $ hg ci -Aqm 'add x and y'
  $ hg mv x z
  $ hg ci -qm 'rename x to z'
  $ hg co -q 0
  $ hg mv y z
  $ hg ci -qm 'rename y to z'
  $ hg l
  @  2 rename y to z
  |  y z
  | o  1 rename x to z
  |/   x z
  o  0 add x and y
     x y
  $ hg debugpathcopies 1 2
  z -> x
  y -> z

Fork renames x to y on one side and removes x on the other
  $ newrepo
  $ echo x > x
  $ hg ci -Aqm 'add x'
  $ hg mv x y
  $ hg ci -m 'rename x to y'
  $ hg co -q 0
  $ hg rm x
  $ hg ci -m 'remove x'
  created new head
  $ hg l
  @  2 remove x
  |  x
  | o  1 rename x to y
  |/   x y
  o  0 add x
     x
  $ hg debugpathcopies 1 2

Merge rename from other branch
  $ newrepo
  $ echo x > x
  $ hg ci -Aqm 'add x'
  $ hg mv x y
  $ hg ci -m 'rename x to y'
  $ hg co -q 0
  $ echo z > z
  $ hg ci -Aqm 'add z'
  $ hg merge -q 1
  $ hg debugp1copies
  $ hg debugp2copies
  $ hg ci -m 'merge rename from p2'
  $ hg l
  @    3 merge rename from p2
  |\
  | o  2 add z
  | |  z
  o |  1 rename x to y
  |/   x y
  o  0 add x
     x
Perhaps we should indicate the rename here, but `hg status` is documented to be weird during
merges, so...
  $ hg debugp1copies -r 3
  $ hg debugp2copies -r 3
  $ hg debugpathcopies 0 3
  x -> y
  $ hg debugpathcopies 1 2
  y -> x
  $ hg debugpathcopies 1 3
  $ hg debugpathcopies 2 3
  x -> y

Copy file from either side in a merge
  $ newrepo
  $ echo x > x
  $ hg ci -Aqm 'add x'
  $ hg co -q null
  $ echo y > y
  $ hg ci -Aqm 'add y'
  $ hg merge -q 0
  $ hg cp y z
  $ hg debugp1copies
  y -> z
  $ hg debugp2copies
  $ hg ci -m 'copy file from p1 in merge'
  $ hg co -q 1
  $ hg merge -q 0
  $ hg cp x z
  $ hg debugp1copies
  $ hg debugp2copies
  x -> z
  $ hg ci -qm 'copy file from p2 in merge'
  $ hg l
  @    3 copy file from p2 in merge
  |\   z
  +---o  2 copy file from p1 in merge
  | |/   z
  | o  1 add y
  |    y
  o  0 add x
     x
  $ hg debugp1copies -r 2
  y -> z
  $ hg debugp2copies -r 2
  $ hg debugpathcopies 1 2
  y -> z
  $ hg debugpathcopies 0 2
  $ hg debugp1copies -r 3
  $ hg debugp2copies -r 3
  x -> z
  $ hg debugpathcopies 1 3
  $ hg debugpathcopies 0 3
  x -> z

Copy file that exists on both sides of the merge, same content on both sides
  $ newrepo
  $ echo x > x
  $ hg ci -Aqm 'add x on branch 1'
  $ hg co -q null
  $ echo x > x
  $ hg ci -Aqm 'add x on branch 2'
  $ hg merge -q 0
  $ hg cp x z
  $ hg debugp1copies
  x -> z
  $ hg debugp2copies
  $ hg ci -qm 'merge'
  $ hg l
  @    2 merge
  |\   z
  | o  1 add x on branch 2
  |    x
  o  0 add x on branch 1
     x
  $ hg debugp1copies -r 2
  x -> z
  $ hg debugp2copies -r 2
It's a little weird that it shows up on both sides
  $ hg debugpathcopies 1 2
  x -> z
  $ hg debugpathcopies 0 2
  x -> z (filelog !)

Copy file that exists on both sides of the merge, different content
  $ newrepo
  $ echo branch1 > x
  $ hg ci -Aqm 'add x on branch 1'
  $ hg co -q null
  $ echo branch2 > x
  $ hg ci -Aqm 'add x on branch 2'
  $ hg merge -q 0
  warning: conflicts while merging x! (edit, then use 'hg resolve --mark')
  [1]
  $ echo resolved > x
  $ hg resolve -m x
  (no more unresolved files)
  $ hg cp x z
  $ hg debugp1copies
  x -> z
  $ hg debugp2copies
  $ hg ci -qm 'merge'
  $ hg l
  @    2 merge
  |\   x z
  | o  1 add x on branch 2
  |    x
  o  0 add x on branch 1
     x
  $ hg debugp1copies -r 2
  x -> z (changeset !)
  x -> z (sidedata !)
  $ hg debugp2copies -r 2
  x -> z (no-changeset no-sidedata !)
  $ hg debugpathcopies 1 2
  x -> z (changeset !)
  x -> z (sidedata !)
  $ hg debugpathcopies 0 2
  x -> z (no-changeset no-sidedata !)

Copy x->y on one side of merge and copy x->z on the other side. Pathcopies from one parent
of the merge to the merge should include the copy from the other side.
  $ newrepo
  $ echo x > x
  $ hg ci -Aqm 'add x'
  $ hg cp x y
  $ hg ci -qm 'copy x to y'
  $ hg co -q 0
  $ hg cp x z
  $ hg ci -qm 'copy x to z'
  $ hg merge -q 1
  $ hg ci -m 'merge copy x->y and copy x->z'
  $ hg l
  @    3 merge copy x->y and copy x->z
  |\
  | o  2 copy x to z
  | |  z
  o |  1 copy x to y
  |/   y
  o  0 add x
     x
  $ hg debugp1copies -r 3
  $ hg debugp2copies -r 3
  $ hg debugpathcopies 2 3
  x -> y
  $ hg debugpathcopies 1 3
  x -> z

Copy x to y on one side of merge, create y and rename to z on the other side.
  $ newrepo
  $ echo x > x
  $ hg ci -Aqm 'add x'
  $ hg cp x y
  $ hg ci -qm 'copy x to y'
  $ hg co -q 0
  $ echo y > y
  $ hg ci -Aqm 'add y'
  $ hg mv y z
  $ hg ci -m 'rename y to z'
  $ hg merge -q 1
  $ hg ci -m 'merge'
  $ hg l
  @    4 merge
  |\
  | o  3 rename y to z
  | |  y z
  | o  2 add y
  | |  y
  o |  1 copy x to y
  |/   y
  o  0 add x
     x
  $ hg debugp1copies -r 3
  y -> z
  $ hg debugp2copies -r 3
  $ hg debugpathcopies 2 3
  y -> z
  $ hg debugpathcopies 1 3
  y -> z (no-filelog !)

Create x and y, then rename x to z on one side of merge, and rename y to z and
modify z on the other side. When storing copies in the changeset, we don't
filter out copies whose target was created on the other side of the merge.
  $ newrepo
  $ echo x > x
  $ echo y > y
  $ hg ci -Aqm 'add x and y'
  $ hg mv x z
  $ hg ci -qm 'rename x to z'
  $ hg co -q 0
  $ hg mv y z
  $ hg ci -qm 'rename y to z'
  $ echo z >> z
  $ hg ci -m 'modify z'
  $ hg merge -q 1
  warning: conflicts while merging z! (edit, then use 'hg resolve --mark')
  [1]
  $ echo z > z
  $ hg resolve -qm z
  $ hg ci -m 'merge 1 into 3'
Try merging the other direction too
  $ hg co -q 1
  $ hg merge -q 3
  warning: conflicts while merging z! (edit, then use 'hg resolve --mark')
  [1]
  $ echo z > z
  $ hg resolve -qm z
  $ hg ci -m 'merge 3 into 1'
  created new head
  $ hg l
  @    5 merge 3 into 1
  |\   z
  +---o  4 merge 1 into 3
  | |/   z
  | o  3 modify z
  | |  z
  | o  2 rename y to z
  | |  y z
  o |  1 rename x to z
  |/   x z
  o  0 add x and y
     x y
  $ hg debugpathcopies 1 4
  y -> z (no-filelog !)
  $ hg debugpathcopies 2 4
  x -> z (no-filelog !)
  $ hg debugpathcopies 0 4
  x -> z (filelog !)
  y -> z (no-filelog !)
  $ hg debugpathcopies 1 5
  y -> z (no-filelog !)
  $ hg debugpathcopies 2 5
  x -> z (no-filelog !)
  $ hg debugpathcopies 0 5
  x -> z


Test for a case in fullcopytracing algorithm where neither of the merging csets
is a descendant of the merge base. This test reflects that the algorithm
correctly finds the copies:

  $ cat >> $HGRCPATH << EOF
  > [experimental]
  > evolution.createmarkers=True
  > evolution.allowunstable=True
  > EOF

  $ newrepo
  $ echo a > a
  $ hg add a
  $ hg ci -m "added a"
  $ echo b > b
  $ hg add b
  $ hg ci -m "added b"

  $ hg mv b b1
  $ hg ci -m "rename b to b1"

  $ hg up ".^"
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo d > d
  $ hg add d
  $ hg ci -m "added d"
  created new head

  $ echo baba >> b
  $ hg ci --amend -m "added d, modified b"

  $ hg l --hidden
  @  4 added d, modified b
  |  b d
  | x  3 added d
  |/   d
  | o  2 rename b to b1
  |/   b b1
  o  1 added b
  |  b
  o  0 added a
     a

Grafting revision 4 on top of revision 2, showing that it respect the rename:

  $ hg up 2 -q
  $ hg graft -r 4 --base 3 --hidden
  grafting 4:af28412ec03c "added d, modified b" (tip) (no-changeset !)
  grafting 4:6325ca0b7a1c "added d, modified b" (tip) (changeset !)
  merging b1 and b to b1

  $ hg l -l1 -p
  @  5 added d, modified b
  |  b1
  ~  diff -r 5a4825cc2926 -r 94a2f1a0e8e2 b1 (no-changeset !)
  ~  diff -r 0a0ed3b3251c -r d544fb655520 b1 (changeset !)
     --- a/b1	Thu Jan 01 00:00:00 1970 +0000
     +++ b/b1	Thu Jan 01 00:00:00 1970 +0000
     @@ -1,1 +1,2 @@
      b
     +baba
  
Test to make sure that fullcopytracing algorithm doesn't fail when neither of the
merging csets is a descendant of the base.
-------------------------------------------------------------------------------------------------

  $ newrepo
  $ echo a > a
  $ hg add a
  $ hg ci -m "added a"
  $ echo b > b
  $ hg add b
  $ hg ci -m "added b"

  $ echo foobar > willconflict
  $ hg add willconflict
  $ hg ci -m "added willconflict"
  $ echo c > c
  $ hg add c
  $ hg ci -m "added c"

  $ hg l
  @  3 added c
  |  c
  o  2 added willconflict
  |  willconflict
  o  1 added b
  |  b
  o  0 added a
     a

  $ hg up ".^^"
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ echo d > d
  $ hg add d
  $ hg ci -m "added d"
  created new head

  $ echo barfoo > willconflict
  $ hg add willconflict
  $ hg ci --amend -m "added willconflict and d"

  $ hg l
  @  5 added willconflict and d
  |  d willconflict
  | o  3 added c
  | |  c
  | o  2 added willconflict
  |/   willconflict
  o  1 added b
  |  b
  o  0 added a
     a

  $ hg rebase -r . -d 2 -t :other
  rebasing 5:5018b1509e94 "added willconflict and d" (tip) (no-changeset !)
  rebasing 5:af8d273bf580 "added willconflict and d" (tip) (changeset !)

  $ hg up 3 -q
  $ hg l --hidden
  o  6 added willconflict and d
  |  d willconflict
  | x  5 added willconflict and d
  | |  d willconflict
  | | x  4 added d
  | |/   d
  +---@  3 added c
  | |    c
  o |  2 added willconflict
  |/   willconflict
  o  1 added b
  |  b
  o  0 added a
     a

Now if we trigger a merge between revision 3 and 6 using base revision 4,
neither of the merging csets will be a descendant of the base revision:

  $ hg graft -r 6 --base 4 --hidden -t :other
  grafting 6:99802e4f1e46 "added willconflict and d" (tip) (no-changeset !)
  grafting 6:b19f0df72728 "added willconflict and d" (tip) (changeset !)