tests/test-ssh-proto.t

pathcopies: give up any optimization based on `introrev`

Between 8a0136f69027 and d98fb3f42f33, we sped up the search for the
introduction revision during path copies. However, further checking show that
finding the introduction revision is still expensive and that we are better off
without it. So we simply drop it and only rely on the linkrev optimisation.

I ran `perfpathcopies` on 6989 pair of revision in the pypy
repository (`hg perfhelper-pathcopies`. The result is massively in favor of
dropping this condition. The result of the copy tracing are unchanged.

Attempt to use a smaller changes preserving linkrev usage were unsuccessful, it
can return wrong result. The following changesets broke test-mv-cp-st-diff.t

    -        if not f.isintroducedafter(limit):
    +        if limit >= 0 and f.linkrev() < limit:
                 return None


Here are various numbers (before this changeset/after this changesets)

            source       destination  before      after    saved-time  ratio
worth cases e66f24650daf 695dfb0f493b 1.062843 1.246369 -0.183526 1.172675
            c979853a3b6a 8d60fe293e79 1.036985 1.196414 -0.159429 1.153743
            22349fa2fc33 fbb1c9fd86c0 0.879926 1.038682 -0.158756 1.180420
            682b98f3e672 a4878080a536 0.909952 1.063801 -0.153849 1.169074
            5adabc9b9848 920958a93997 0.993622 1.147452 -0.153830 1.154817
worse  1%   dbfbfcf077e9 aea8f2fd3593 1.016595 1.082999 -0.066404 1.065320
worse  5%   c95f1ced15f2 7d29d5e39734 0.453694 0.471156 -0.017462 1.038488
worse 10%   3e144ed1d5b7 2aef0e942480 0.035140 0.037535 -0.002395 1.068156
worse 25%   321fc60db035 801748ba582a 0.009267 0.009325 -0.000058 1.006259
median      2088ce763fc2 e6991321d78b 0.000665 0.000651 0.000014 0.978947
best 25%    915631a97de6 385b31354be6 0.040743 0.040363 0.000380 0.990673
best 10%    ad495c36a765 19c10384d3e7 0.431658 0.411490 0.020168 0.953278
best  5%    d13ae7d283ae 813c99f810ac 1.141404 1.075346 0.066058 0.942126
best  1%    81593cb4a496 99ae11866969 1.833297 0.063823 1.769474 0.034813
best cases  c3b14617fbd7 743a0fcaa4eb 1101.811740 2.735970 1099.075770 0.002483
            c3b14617fbd7 9ba6ab77fd29 1116.753953 2.800729 1113.953224 0.002508
            058b99d6e81f 57e249b7a3ea 1246.128485 3.042762 1243.085723 0.002442
            9a8c361aab49 0354a250d371 1253.111894 3.085796 1250.026098 0.002463
            442dbbc53c68 3ec1002a818c 1261.786294 3.138607 1258.647687 0.002487


As one can see, the average case is not really impacted. However, the worth case
we get after this changeset are much better than the one we had before it. We
have 30 pairs where improvements are above 10 minutes.

This reflect in the combined time for all pairs
before: 26256s
after:   1300s (-95%)

If we remove these pathological 30 cases, we still see a significant improvements:
before:  1631s
after:   1245s (-24%)

#require no-chg

  $ cat > hgrc-sshv2 << EOF
  > %include $HGRCPATH
  > [experimental]
  > sshpeer.advertise-v2 = true
  > sshserver.support-v2 = true
  > EOF

Helper function to run protocol tests against multiple protocol versions.
This is easier than using #testcases because managing differences between
protocols with inline conditional output is hard to read.

  $ debugwireproto() {
  >   commands=`cat -`
  >   echo 'testing ssh1'
  >   echo "${commands}" | hg --verbose debugwireproto --localssh
  >   echo ""
  >   echo 'testing ssh2'
  >   echo "${commands}" | HGRCPATH=$TESTTMP/hgrc-sshv2 hg --verbose debugwireproto --localssh
  > }

  $ cat >> $HGRCPATH << EOF
  > [ui]
  > ssh = "$PYTHON" "$TESTDIR/dummyssh"
  > [devel]
  > debug.peer-request = true
  > [extensions]
  > sshprotoext = $TESTDIR/sshprotoext.py
  > EOF

  $ hg init server
  $ cd server
  $ echo 0 > foo
  $ hg -q add foo
  $ hg commit -m initial

A no-op connection performs a handshake

  $ hg debugwireproto --localssh << EOF
  > EOF
  creating ssh peer from handshake results

Raw peers don't perform any activity

  $ hg debugwireproto --localssh --peer raw << EOF
  > EOF
  using raw connection to peer
  $ hg debugwireproto --localssh --peer ssh1 << EOF
  > EOF
  creating ssh peer for wire protocol version 1
  $ hg debugwireproto --localssh --peer ssh2 << EOF
  > EOF
  creating ssh peer for wire protocol version 2

Test a normal behaving server, for sanity

  $ cd ..

  $ hg --debug debugpeer ssh://user@dummy/server
  running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
  running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
  devel-peer-request: hello+between
  devel-peer-request:   pairs: 81 bytes
  sending hello command
  sending between command
  remote: 440
  remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  remote: 1
  devel-peer-request: protocaps
  devel-peer-request:   caps: * bytes (glob)
  sending protocaps command
  url: ssh://user@dummy/server
  local: no
  pushable: yes

Server should answer the "hello" command in isolation

  $ hg -R server debugwireproto --localssh --peer raw << EOF
  > raw
  >     hello\n
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n

`hg debugserve --sshstdio` works

  $ cd server
  $ hg debugserve --sshstdio << EOF
  > hello
  > EOF
  440
  capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash

I/O logging works

  $ hg debugserve --sshstdio --logiofd 1 << EOF
  > hello
  > EOF
  e> flush() -> None
  o> write(4) -> 4:
  o>     440\n
  o> write(440) -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  440
  capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  o> flush() -> None

  $ hg debugserve --sshstdio --logiofile $TESTTMP/io << EOF
  > hello
  > EOF
  440
  capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash

  $ cat $TESTTMP/io
  e> flush() -> None
  o> write(4) -> 4:
  o>     440\n
  o> write(440) -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  o> flush() -> None

  $ cd ..

>=0.9.1 clients send a "hello" + "between" for the null range as part of handshake.
Server should reply with capabilities and should send "1\n\n" as a successful
reply with empty response to the "between".

  $ hg -R server debugwireproto --localssh --peer raw << EOF
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

SSH banner is not printed by default, ignored by clients

  $ SSHSERVERMODE=banner hg debugpeer ssh://user@dummy/server
  url: ssh://user@dummy/server
  local: no
  pushable: yes

--debug will print the banner

  $ SSHSERVERMODE=banner hg --debug debugpeer ssh://user@dummy/server
  running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
  running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
  devel-peer-request: hello+between
  devel-peer-request:   pairs: 81 bytes
  sending hello command
  sending between command
  remote: banner: line 0
  remote: banner: line 1
  remote: banner: line 2
  remote: banner: line 3
  remote: banner: line 4
  remote: banner: line 5
  remote: banner: line 6
  remote: banner: line 7
  remote: banner: line 8
  remote: banner: line 9
  remote: 440
  remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  remote: 1
  devel-peer-request: protocaps
  devel-peer-request:   caps: * bytes (glob)
  sending protocaps command
  url: ssh://user@dummy/server
  local: no
  pushable: yes

And test the banner with the raw protocol

  $ SSHSERVERMODE=banner hg -R server debugwireproto --localssh --peer raw << EOF
  > raw
  >     hello\n
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 15:
  o>     banner: line 0\n
  o> readline() -> 15:
  o>     banner: line 1\n
  o> readline() -> 15:
  o>     banner: line 2\n
  o> readline() -> 15:
  o>     banner: line 3\n
  o> readline() -> 15:
  o>     banner: line 4\n
  o> readline() -> 15:
  o>     banner: line 5\n
  o> readline() -> 15:
  o>     banner: line 6\n
  o> readline() -> 15:
  o>     banner: line 7\n
  o> readline() -> 15:
  o>     banner: line 8\n
  o> readline() -> 15:
  o>     banner: line 9\n
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

Connecting to a <0.9.1 server that doesn't support the hello command.
The client should refuse, as we dropped support for connecting to such
servers.

  $ SSHSERVERMODE=no-hello hg --debug debugpeer ssh://user@dummy/server
  running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
  running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
  devel-peer-request: hello+between
  devel-peer-request:   pairs: 81 bytes
  sending hello command
  sending between command
  remote: 0
  remote: 1
  abort: no suitable response from remote hg!
  [255]

Sending an unknown command to the server results in an empty response to that command

  $ hg -R server debugwireproto --localssh --peer raw << EOF
  > raw
  >     pre-hello\n
  > readline
  > raw
  >     hello\n
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(10) -> 10:
  i>     pre-hello\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     440\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  o> readline() -> 2:
  o>     1\n

  $ hg --config sshpeer.mode=extra-handshake-commands --config sshpeer.handshake-mode=pre-no-args --debug debugpeer ssh://user@dummy/server
  running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
  running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
  sending no-args command
  devel-peer-request: hello+between
  devel-peer-request:   pairs: 81 bytes
  sending hello command
  sending between command
  remote: 0
  remote: 440
  remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  remote: 1
  devel-peer-request: protocaps
  devel-peer-request:   caps: * bytes (glob)
  sending protocaps command
  url: ssh://user@dummy/server
  local: no
  pushable: yes

Send multiple unknown commands before hello

  $ hg -R server debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown1\n
  > readline
  > raw
  >     unknown2\n
  > readline
  > raw
  >     unknown3\n
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(9) -> 9:
  i>     unknown1\n
  o> readline() -> 2:
  o>     0\n
  i> write(9) -> 9:
  i>     unknown2\n
  o> readline() -> 2:
  o>     0\n
  i> write(9) -> 9:
  i>     unknown3\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

  $ hg --config sshpeer.mode=extra-handshake-commands --config sshpeer.handshake-mode=pre-multiple-no-args --debug debugpeer ssh://user@dummy/server
  running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
  running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
  sending unknown1 command
  sending unknown2 command
  sending unknown3 command
  devel-peer-request: hello+between
  devel-peer-request:   pairs: 81 bytes
  sending hello command
  sending between command
  remote: 0
  remote: 0
  remote: 0
  remote: 440
  remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  remote: 1
  devel-peer-request: protocaps
  devel-peer-request:   caps: * bytes (glob)
  sending protocaps command
  url: ssh://user@dummy/server
  local: no
  pushable: yes

Send an unknown command before hello that has arguments

  $ cd server

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     with-args\n
  >     foo 13\n
  >     value for foo\n
  >     bar 13\n
  >     value for bar\n
  > readline
  > readline
  > readline
  > readline
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(52) -> 52:
  i>     with-args\n
  i>     foo 13\n
  i>     value for foo\n
  i>     bar 13\n
  i>     value for bar\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

Send an unknown command having an argument that looks numeric

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown\n
  >     foo 1\n
  >     0\n
  > readline
  > readline
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(16) -> 16:
  i>     unknown\n
  i>     foo 1\n
  i>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown\n
  >     foo 1\n
  >     1\n
  > readline
  > readline
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(16) -> 16:
  i>     unknown\n
  i>     foo 1\n
  i>     1\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

When sending a dict argument value, it is serialized to
"<arg> <item count>" followed by "<key> <len>\n<value>" for each item
in the dict.

Dictionary value for unknown command

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown\n
  >     dict 3\n
  >     key1 3\n
  >     foo\n
  >     key2 3\n
  >     bar\n
  >     key3 3\n
  >     baz\n
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(48) -> 48:
  i>     unknown\n
  i>     dict 3\n
  i>     key1 3\n
  i>     foo\n
  i>     key2 3\n
  i>     bar\n
  i>     key3 3\n
  i>     baz\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n

Incomplete dictionary send

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown\n
  >     dict 3\n
  >     key1 3\n
  >     foo\n
  > readline
  > readline
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(26) -> 26:
  i>     unknown\n
  i>     dict 3\n
  i>     key1 3\n
  i>     foo\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n

Incomplete value send

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown\n
  >     dict 3\n
  >     key1 3\n
  >     fo
  > readline
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(24) -> 24:
  i>     unknown\n
  i>     dict 3\n
  i>     key1 3\n
  i>     fo
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n

Send a command line with spaces

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown withspace\n
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(18) -> 18:
  i>     unknown withspace\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown with multiple spaces\n
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > EOF
  using raw connection to peer
  i> write(29) -> 29:
  i>     unknown with multiple spaces\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown with spaces\n
  >     key 10\n
  >     some value\n
  > readline
  > readline
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(38) -> 38:
  i>     unknown with spaces\n
  i>     key 10\n
  i>     some value\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
Send an unknown command after the "between"

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000unknown
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  i> write(105) -> 105:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000unknown
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

And one with arguments

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     hello\n
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > readline
  > readline
  > raw
  >     unknown\n
  >     foo 5\n
  >     \nvalue\n
  >     bar 3\n
  >     baz\n
  > readline
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  i> write(31) -> 31:
  i>     unknown\n
  i>     foo 5\n
  i>     \n
  i>     value\n
  i>     bar 3\n
  i>     baz\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 0: 

Send a valid command before the handshake

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     heads\n
  > readline
  > raw
  >     hello\n
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(6) -> 6:
  i>     heads\n
  o> readline() -> 3:
  o>     41\n
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 41:
  o>     68986213bd4485ea51533535e3fc9e78007a711f\n
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  o> readline() -> 2:
  o>     1\n

And a variation that doesn't send the between command

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     heads\n
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(6) -> 6:
  i>     heads\n
  o> readline() -> 3:
  o>     41\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 41:
  o>     68986213bd4485ea51533535e3fc9e78007a711f\n
  o> readline() -> 4:
  o>     440\n

Send an upgrade request to a server that doesn't support that command

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade 2e82ab3f-9ce3-4b4e-8f8c-6fd1c0e9e23a proto=irrelevant1%2Cirrelevant2\n
  > readline
  > raw
  >     hello\n
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(77) -> 77:
  i>     upgrade 2e82ab3f-9ce3-4b4e-8f8c-6fd1c0e9e23a proto=irrelevant1%2Cirrelevant2\n
  o> readline() -> 2:
  o>     0\n
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

  $ cd ..

  $ hg --config experimental.sshpeer.advertise-v2=true --debug debugpeer ssh://user@dummy/server
  running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
  running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
  sending upgrade request: * proto=exp-ssh-v2-0003 (glob)
  devel-peer-request: hello+between
  devel-peer-request:   pairs: 81 bytes
  sending hello command
  sending between command
  remote: 0
  remote: 440
  remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  remote: 1
  devel-peer-request: protocaps
  devel-peer-request:   caps: * bytes (glob)
  sending protocaps command
  url: ssh://user@dummy/server
  local: no
  pushable: yes

Enable version 2 support on server. We need to do this in hgrc because we can't
use --config with `hg serve --stdio`.

  $ cat >> server/.hg/hgrc << EOF
  > [experimental]
  > sshserver.support-v2 = true
  > EOF

Send an upgrade request to a server that supports upgrade

  $ cd server

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade this-is-some-token proto=exp-ssh-v2-0003\n
  >     hello\n
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(153) -> 153:
  i>     upgrade this-is-some-token proto=exp-ssh-v2-0003\n
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 44:
  o>     upgraded this-is-some-token exp-ssh-v2-0003\n
  o> readline() -> 4:
  o>     439\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n

  $ cd ..

  $ hg --config experimental.sshpeer.advertise-v2=true --debug debugpeer ssh://user@dummy/server
  running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
  running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
  sending upgrade request: * proto=exp-ssh-v2-0003 (glob)
  devel-peer-request: hello+between
  devel-peer-request:   pairs: 81 bytes
  sending hello command
  sending between command
  protocol upgraded to exp-ssh-v2-0003
  remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  devel-peer-request: protocaps
  devel-peer-request:   caps: * bytes (glob)
  sending protocaps command
  url: ssh://user@dummy/server
  local: no
  pushable: yes

Verify the peer has capabilities

  $ hg --config experimental.sshpeer.advertise-v2=true --debug debugcapabilities ssh://user@dummy/server
  running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
  running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
  sending upgrade request: * proto=exp-ssh-v2-0003 (glob)
  devel-peer-request: hello+between
  devel-peer-request:   pairs: 81 bytes
  sending hello command
  sending between command
  protocol upgraded to exp-ssh-v2-0003
  remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  devel-peer-request: protocaps
  devel-peer-request:   caps: * bytes (glob)
  sending protocaps command
  Main capabilities:
    batch
    branchmap
    $USUAL_BUNDLE2_CAPS$
    changegroupsubset
    getbundle
    known
    lookup
    protocaps
    pushkey
    streamreqs=generaldelta,revlogv1,sparserevlog
    unbundle=HG10GZ,HG10BZ,HG10UN
    unbundlehash
  Bundle2 capabilities:
    HG20
    bookmarks
    changegroup
      01
      02
    digests
      md5
      sha1
      sha512
    error
      abort
      unsupportedcontent
      pushraced
      pushkey
    hgtagsfnodes
    listkeys
    phases
      heads
    pushkey
    remote-changegroup
      http
      https
    rev-branch-cache
    stream
      v2

Command after upgrade to version 2 is processed

  $ cd server

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >      upgrade this-is-some-token proto=exp-ssh-v2-0003\n
  >      hello\n
  >      between\n
  >      pairs 81\n
  >      0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > readline
  > raw
  >      hello\n
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(153) -> 153:
  i>     upgrade this-is-some-token proto=exp-ssh-v2-0003\n
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 44:
  o>     upgraded this-is-some-token exp-ssh-v2-0003\n
  o> readline() -> 4:
  o>     439\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     424\n
  o> readline() -> 424:
  o>     capabilities: branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n

Multiple upgrades is not allowed

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade this-is-some-token proto=exp-ssh-v2-0003\n
  >     hello\n
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > readline
  > raw
  >     upgrade another-token proto=irrelevant\n
  >     hello\n
  > readline
  > readavailable
  > EOF
  using raw connection to peer
  i> write(153) -> 153:
  i>     upgrade this-is-some-token proto=exp-ssh-v2-0003\n
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 44:
  o>     upgraded this-is-some-token exp-ssh-v2-0003\n
  o> readline() -> 4:
  o>     439\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  i> write(45) -> 45:
  i>     upgrade another-token proto=irrelevant\n
  i>     hello\n
  o> readline() -> 1:
  o>     \n
  e> read(-1) -> 42:
  e>     cannot upgrade protocols multiple times\n
  e>     -\n

Malformed upgrade request line (not exactly 3 space delimited tokens)

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade\n
  > readline
  > EOF
  using raw connection to peer
  i> write(8) -> 8:
  i>     upgrade\n
  o> readline() -> 2:
  o>     0\n

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade token\n
  > readline
  > EOF
  using raw connection to peer
  i> write(14) -> 14:
  i>     upgrade token\n
  o> readline() -> 2:
  o>     0\n

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade token foo=bar extra-token\n
  > readline
  > EOF
  using raw connection to peer
  i> write(34) -> 34:
  i>     upgrade token foo=bar extra-token\n
  o> readline() -> 2:
  o>     0\n

Upgrade request to unsupported protocol is ignored

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade this-is-some-token proto=unknown1,unknown2\n
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(51) -> 51:
  i>     upgrade this-is-some-token proto=unknown1,unknown2\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

Upgrade request must be followed by hello + between

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade token proto=exp-ssh-v2-0003\n
  >     invalid\n
  > readline
  > readavailable
  > EOF
  using raw connection to peer
  i> write(44) -> 44:
  i>     upgrade token proto=exp-ssh-v2-0003\n
  i>     invalid\n
  o> readline() -> 1:
  o>     \n
  e> read(-1) -> 46:
  e>     malformed handshake protocol: missing hello\n
  e>     -\n

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade token proto=exp-ssh-v2-0003\n
  >     hello\n
  >     invalid\n
  > readline
  > readavailable
  > EOF
  using raw connection to peer
  i> write(50) -> 50:
  i>     upgrade token proto=exp-ssh-v2-0003\n
  i>     hello\n
  i>     invalid\n
  o> readline() -> 1:
  o>     \n
  e> read(-1) -> 48:
  e>     malformed handshake protocol: missing between\n
  e>     -\n

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade token proto=exp-ssh-v2-0003\n
  >     hello\n
  >     between\n
  >     invalid\n
  > readline
  > readavailable
  > EOF
  using raw connection to peer
  i> write(58) -> 58:
  i>     upgrade token proto=exp-ssh-v2-0003\n
  i>     hello\n
  i>     between\n
  i>     invalid\n
  o> readline() -> 1:
  o>     \n
  e> read(-1) -> 49:
  e>     malformed handshake protocol: missing pairs 81\n
  e>     -\n

Legacy commands are not exposed to version 2 of protocol

TODO re-enable these once we're back to actually using v2 commands

$ hg --config experimental.sshpeer.advertise-v2=true debugwireproto --localssh << EOF
> command branches
>     nodes 0000000000000000000000000000000000000000
> EOF
creating ssh peer from handshake results
sending branches command
response:

$ hg --config experimental.sshpeer.advertise-v2=true debugwireproto --localssh << EOF
> command changegroup
>     roots 0000000000000000000000000000000000000000
> EOF
creating ssh peer from handshake results
sending changegroup command
response:

$ hg --config experimental.sshpeer.advertise-v2=true debugwireproto --localssh << EOF
> command changegroupsubset
>     bases 0000000000000000000000000000000000000000
>     heads 0000000000000000000000000000000000000000
> EOF
creating ssh peer from handshake results
sending changegroupsubset command
response:

  $ cd ..

Test listkeys for listing namespaces

  $ hg init empty
  $ cd empty
  $ debugwireproto << EOF
  > command listkeys
  >     namespace namespaces
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(13) -> 13:
  i>     namespace 10\n
  i> write(10) -> 10: namespaces
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     30\n
  o> bufferedread(30) -> 30:
  o>     bookmarks\t\n
  o>     namespaces\t\n
  o>     phases\t
  response: {
    b'bookmarks': b'',
    b'namespaces': b'',
    b'phases': b''
  }
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0003\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0003\n (glob)
  o> readline() -> 4:
  o>     439\n
  o> read(439) -> 439: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  o> read(1) -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(13) -> 13:
  i>     namespace 10\n
  i> write(10) -> 10: namespaces
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     30\n
  o> bufferedread(30) -> 30:
  o>     bookmarks\t\n
  o>     namespaces\t\n
  o>     phases\t
  response: {
    b'bookmarks': b'',
    b'namespaces': b'',
    b'phases': b''
  }

  $ cd ..

Test listkeys for bookmarks

  $ hg init bookmarkrepo
  $ cd bookmarkrepo
  $ echo 0 > foo
  $ hg add foo
  $ hg -q commit -m initial
  $ echo 1 > foo
  $ hg commit -m second

With no bookmarks set

  $ debugwireproto << EOF
  > command listkeys
  >     namespace bookmarks
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 9\n
  i> write(9) -> 9: bookmarks
  i> flush() -> None
  o> bufferedreadline() -> 2:
  o>     0\n
  response: {}
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0003\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0003\n (glob)
  o> readline() -> 4:
  o>     439\n
  o> read(439) -> 439: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  o> read(1) -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 9\n
  i> write(9) -> 9: bookmarks
  i> flush() -> None
  o> bufferedreadline() -> 2:
  o>     0\n
  response: {}

With a single bookmark set

  $ hg book -r 0 bookA
  $ debugwireproto << EOF
  > command listkeys
  >     namespace bookmarks
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 9\n
  i> write(9) -> 9: bookmarks
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     46\n
  o> bufferedread(46) -> 46: bookA\t68986213bd4485ea51533535e3fc9e78007a711f
  response: {
    b'bookA': b'68986213bd4485ea51533535e3fc9e78007a711f'
  }
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0003\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0003\n (glob)
  o> readline() -> 4:
  o>     439\n
  o> read(439) -> 439: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  o> read(1) -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 9\n
  i> write(9) -> 9: bookmarks
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     46\n
  o> bufferedread(46) -> 46: bookA\t68986213bd4485ea51533535e3fc9e78007a711f
  response: {
    b'bookA': b'68986213bd4485ea51533535e3fc9e78007a711f'
  }

With multiple bookmarks set

  $ hg book -r 1 bookB
  $ debugwireproto << EOF
  > command listkeys
  >     namespace bookmarks
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 9\n
  i> write(9) -> 9: bookmarks
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     93\n
  o> bufferedread(93) -> 93:
  o>     bookA\t68986213bd4485ea51533535e3fc9e78007a711f\n
  o>     bookB\t1880f3755e2e52e3199e0ee5638128b08642f34d
  response: {
    b'bookA': b'68986213bd4485ea51533535e3fc9e78007a711f',
    b'bookB': b'1880f3755e2e52e3199e0ee5638128b08642f34d'
  }
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0003\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0003\n (glob)
  o> readline() -> 4:
  o>     439\n
  o> read(439) -> 439: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  o> read(1) -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 9\n
  i> write(9) -> 9: bookmarks
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     93\n
  o> bufferedread(93) -> 93:
  o>     bookA\t68986213bd4485ea51533535e3fc9e78007a711f\n
  o>     bookB\t1880f3755e2e52e3199e0ee5638128b08642f34d
  response: {
    b'bookA': b'68986213bd4485ea51533535e3fc9e78007a711f',
    b'bookB': b'1880f3755e2e52e3199e0ee5638128b08642f34d'
  }

Test pushkey for bookmarks

  $ debugwireproto << EOF
  > command pushkey
  >     namespace bookmarks
  >     key remote
  >     old
  >     new 68986213bd4485ea51533535e3fc9e78007a711f
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending pushkey command
  i> write(8) -> 8:
  i>     pushkey\n
  i> write(6) -> 6:
  i>     key 6\n
  i> write(6) -> 6: remote
  i> write(12) -> 12:
  i>     namespace 9\n
  i> write(9) -> 9: bookmarks
  i> write(7) -> 7:
  i>     new 40\n
  i> write(40) -> 40: 68986213bd4485ea51533535e3fc9e78007a711f
  i> write(6) -> 6:
  i>     old 0\n
  i> flush() -> None
  o> bufferedreadline() -> 2:
  o>     2\n
  o> bufferedread(2) -> 2:
  o>     1\n
  response: True
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0003\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0003\n (glob)
  o> readline() -> 4:
  o>     439\n
  o> read(439) -> 439: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  o> read(1) -> 1:
  o>     \n
  sending pushkey command
  i> write(8) -> 8:
  i>     pushkey\n
  i> write(6) -> 6:
  i>     key 6\n
  i> write(6) -> 6: remote
  i> write(12) -> 12:
  i>     namespace 9\n
  i> write(9) -> 9: bookmarks
  i> write(7) -> 7:
  i>     new 40\n
  i> write(40) -> 40: 68986213bd4485ea51533535e3fc9e78007a711f
  i> write(6) -> 6:
  i>     old 0\n
  i> flush() -> None
  o> bufferedreadline() -> 2:
  o>     2\n
  o> bufferedread(2) -> 2:
  o>     1\n
  response: True

  $ hg bookmarks
     bookA                     0:68986213bd44
     bookB                     1:1880f3755e2e
     remote                    0:68986213bd44

  $ cd ..

Test listkeys for phases

  $ hg init phasesrepo
  $ cd phasesrepo

Phases on empty repo

  $ debugwireproto << EOF
  > command listkeys
  >     namespace phases
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     15\n
  o> bufferedread(15) -> 15: publishing\tTrue
  response: {
    b'publishing': b'True'
  }
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0003\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0003\n (glob)
  o> readline() -> 4:
  o>     439\n
  o> read(439) -> 439: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  o> read(1) -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     15\n
  o> bufferedread(15) -> 15: publishing\tTrue
  response: {
    b'publishing': b'True'
  }

Create some commits

  $ echo 0 > foo
  $ hg add foo
  $ hg -q commit -m initial
  $ hg phase --public
  $ echo 1 > foo
  $ hg commit -m 'head 1 commit 1'
  $ echo 2 > foo
  $ hg commit -m 'head 1 commit 2'
  $ hg -q up 0
  $ echo 1a > foo
  $ hg commit -m 'head 2 commit 1'
  created new head
  $ echo 2a > foo
  $ hg commit -m 'head 2 commit 2'

Two draft heads

  $ debugwireproto << EOF
  > command listkeys
  >     namespace phases
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> flush() -> None
  o> bufferedreadline() -> 4:
  o>     101\n
  o> bufferedread(101) -> 101:
  o>     20b8a89289d80036e6c4e87c2083e3bea1586637\t1\n
  o>     c4750011d906c18ea2f0527419cbc1a544435150\t1\n
  o>     publishing\tTrue
  response: {
    b'20b8a89289d80036e6c4e87c2083e3bea1586637': b'1',
    b'c4750011d906c18ea2f0527419cbc1a544435150': b'1',
    b'publishing': b'True'
  }
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0003\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0003\n (glob)
  o> readline() -> 4:
  o>     439\n
  o> read(439) -> 439: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  o> read(1) -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> flush() -> None
  o> bufferedreadline() -> 4:
  o>     101\n
  o> bufferedread(101) -> 101:
  o>     20b8a89289d80036e6c4e87c2083e3bea1586637\t1\n
  o>     c4750011d906c18ea2f0527419cbc1a544435150\t1\n
  o>     publishing\tTrue
  response: {
    b'20b8a89289d80036e6c4e87c2083e3bea1586637': b'1',
    b'c4750011d906c18ea2f0527419cbc1a544435150': b'1',
    b'publishing': b'True'
  }

Single draft head

  $ hg phase --public -r 2
  $ debugwireproto << EOF
  > command listkeys
  >     namespace phases
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     58\n
  o> bufferedread(58) -> 58:
  o>     c4750011d906c18ea2f0527419cbc1a544435150\t1\n
  o>     publishing\tTrue
  response: {
    b'c4750011d906c18ea2f0527419cbc1a544435150': b'1',
    b'publishing': b'True'
  }
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0003\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0003\n (glob)
  o> readline() -> 4:
  o>     439\n
  o> read(439) -> 439: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  o> read(1) -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     58\n
  o> bufferedread(58) -> 58:
  o>     c4750011d906c18ea2f0527419cbc1a544435150\t1\n
  o>     publishing\tTrue
  response: {
    b'c4750011d906c18ea2f0527419cbc1a544435150': b'1',
    b'publishing': b'True'
  }

All public heads

  $ hg phase --public -r 4
  $ debugwireproto << EOF
  > command listkeys
  >     namespace phases
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     15\n
  o> bufferedread(15) -> 15: publishing\tTrue
  response: {
    b'publishing': b'True'
  }
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0003\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0003\n (glob)
  o> readline() -> 4:
  o>     439\n
  o> read(439) -> 439: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  o> read(1) -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     15\n
  o> bufferedread(15) -> 15: publishing\tTrue
  response: {
    b'publishing': b'True'
  }

Setting public phase via pushkey

  $ hg phase --draft --force -r .

  $ debugwireproto << EOF
  > command pushkey
  >     namespace phases
  >     key 7127240a084fd9dc86fe8d1f98e26229161ec82b
  >     old 1
  >     new 0
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending pushkey command
  i> write(8) -> 8:
  i>     pushkey\n
  i> write(7) -> 7:
  i>     key 40\n
  i> write(40) -> 40: 7127240a084fd9dc86fe8d1f98e26229161ec82b
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> write(6) -> 6:
  i>     new 1\n
  i> write(1) -> 1: 0
  i> write(6) -> 6:
  i>     old 1\n
  i> write(1) -> 1: 1
  i> flush() -> None
  o> bufferedreadline() -> 2:
  o>     2\n
  o> bufferedread(2) -> 2:
  o>     1\n
  response: True
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0003\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0003\n (glob)
  o> readline() -> 4:
  o>     439\n
  o> read(439) -> 439: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  o> read(1) -> 1:
  o>     \n
  sending pushkey command
  i> write(8) -> 8:
  i>     pushkey\n
  i> write(7) -> 7:
  i>     key 40\n
  i> write(40) -> 40: 7127240a084fd9dc86fe8d1f98e26229161ec82b
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> write(6) -> 6:
  i>     new 1\n
  i> write(1) -> 1: 0
  i> write(6) -> 6:
  i>     old 1\n
  i> write(1) -> 1: 1
  i> flush() -> None
  o> bufferedreadline() -> 2:
  o>     2\n
  o> bufferedread(2) -> 2:
  o>     1\n
  response: True

  $ hg phase .
  4: public

  $ cd ..

Test batching of requests

  $ hg init batching
  $ cd batching
  $ echo 0 > foo
  $ hg add foo
  $ hg -q commit -m initial
  $ hg phase --public
  $ echo 1 > foo
  $ hg commit -m 'commit 1'
  $ hg -q up 0
  $ echo 2 > foo
  $ hg commit -m 'commit 2'
  created new head
  $ hg book -r 1 bookA
  $ hg book -r 2 bookB

  $ debugwireproto << EOF
  > batchbegin
  > command heads
  > command listkeys
  >     namespace bookmarks
  > command listkeys
  >     namespace phases
  > batchsubmit
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     440\n
  o> readline() -> 440:
  o>     capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending batch with 3 sub-commands
  i> write(6) -> 6:
  i>     batch\n
  i> write(4) -> 4:
  i>     * 0\n
  i> write(8) -> 8:
  i>     cmds 61\n
  i> write(61) -> 61: heads ;listkeys namespace=bookmarks;listkeys namespace=phases
  i> flush() -> None
  o> bufferedreadline() -> 4:
  o>     278\n
  o> bufferedread(278) -> 278:
  o>     bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
  o>     ;bookA\t4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
  o>     bookB\tbfebe6bd38eebc6f8202e419c1171268987ea6a6;4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\t1\n
  o>     bfebe6bd38eebc6f8202e419c1171268987ea6a6\t1\n
  o>     publishing\tTrue
  response #0: bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
  response #1: bookA\t4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\nbookB\tbfebe6bd38eebc6f8202e419c1171268987ea6a6
  response #2: 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\t1\nbfebe6bd38eebc6f8202e419c1171268987ea6a6\t1\npublishing\tTrue
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0003\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0003\n (glob)
  o> readline() -> 4:
  o>     439\n
  o> read(439) -> 439: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  o> read(1) -> 1:
  o>     \n
  sending batch with 3 sub-commands
  i> write(6) -> 6:
  i>     batch\n
  i> write(4) -> 4:
  i>     * 0\n
  i> write(8) -> 8:
  i>     cmds 61\n
  i> write(61) -> 61: heads ;listkeys namespace=bookmarks;listkeys namespace=phases
  i> flush() -> None
  o> bufferedreadline() -> 4:
  o>     278\n
  o> bufferedread(278) -> 278:
  o>     bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
  o>     ;bookA\t4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
  o>     bookB\tbfebe6bd38eebc6f8202e419c1171268987ea6a6;4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\t1\n
  o>     bfebe6bd38eebc6f8202e419c1171268987ea6a6\t1\n
  o>     publishing\tTrue
  response #0: bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
  response #1: bookA\t4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\nbookB\tbfebe6bd38eebc6f8202e419c1171268987ea6a6
  response #2: 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\t1\nbfebe6bd38eebc6f8202e419c1171268987ea6a6\t1\npublishing\tTrue