annotate tests/test-wireproto-command-manifestdata.t @ 43198:c16fe77e340a

pathcopies: give up any optimization based on `introrev`

Between 8a0136f69027 and d98fb3f42f33, we sped up the search for the
introduction revision during path copies. However, further checking show that
finding the introduction revision is still expensive and that we are better off
without it. So we simply drop it and only rely on the linkrev optimisation.

I ran `perfpathcopies` on 6989 pair of revision in the pypy
repository (`hg perfhelper-pathcopies`. The result is massively in favor of
dropping this condition. The result of the copy tracing are unchanged.

Attempt to use a smaller changes preserving linkrev usage were unsuccessful, it
can return wrong result. The following changesets broke test-mv-cp-st-diff.t

    -        if not f.isintroducedafter(limit):
    +        if limit >= 0 and f.linkrev() < limit:
                 return None


Here are various numbers (before this changeset/after this changesets)

            source       destination  before      after    saved-time  ratio
worth cases e66f24650daf 695dfb0f493b 1.062843 1.246369 -0.183526 1.172675
            c979853a3b6a 8d60fe293e79 1.036985 1.196414 -0.159429 1.153743
            22349fa2fc33 fbb1c9fd86c0 0.879926 1.038682 -0.158756 1.180420
            682b98f3e672 a4878080a536 0.909952 1.063801 -0.153849 1.169074
            5adabc9b9848 920958a93997 0.993622 1.147452 -0.153830 1.154817
worse  1%   dbfbfcf077e9 aea8f2fd3593 1.016595 1.082999 -0.066404 1.065320
worse  5%   c95f1ced15f2 7d29d5e39734 0.453694 0.471156 -0.017462 1.038488
worse 10%   3e144ed1d5b7 2aef0e942480 0.035140 0.037535 -0.002395 1.068156
worse 25%   321fc60db035 801748ba582a 0.009267 0.009325 -0.000058 1.006259
median      2088ce763fc2 e6991321d78b 0.000665 0.000651 0.000014 0.978947
best 25%    915631a97de6 385b31354be6 0.040743 0.040363 0.000380 0.990673
best 10%    ad495c36a765 19c10384d3e7 0.431658 0.411490 0.020168 0.953278
best  5%    d13ae7d283ae 813c99f810ac 1.141404 1.075346 0.066058 0.942126
best  1%    81593cb4a496 99ae11866969 1.833297 0.063823 1.769474 0.034813
best cases  c3b14617fbd7 743a0fcaa4eb 1101.811740 2.735970 1099.075770 0.002483
            c3b14617fbd7 9ba6ab77fd29 1116.753953 2.800729 1113.953224 0.002508
            058b99d6e81f 57e249b7a3ea 1246.128485 3.042762 1243.085723 0.002442
            9a8c361aab49 0354a250d371 1253.111894 3.085796 1250.026098 0.002463
            442dbbc53c68 3ec1002a818c 1261.786294 3.138607 1258.647687 0.002487


As one can see, the average case is not really impacted. However, the worth case
we get after this changeset are much better than the one we had before it. We
have 30 pairs where improvements are above 10 minutes.

This reflect in the combined time for all pairs
before: 26256s
after:   1300s (-95%)

If we remove these pathological 30 cases, we still see a significant improvements:
before:  1631s
after:   1245s (-24%)

  $ . $TESTDIR/wireprotohelpers.sh

  $ hg init server
  $ enablehttpv2 server
  $ cd server
  $ echo a0 > a
  $ echo b0 > b
  $ mkdir -p dir0/child0 dir0/child1 dir1
  $ echo c0 > dir0/c
  $ echo d0 > dir0/d
  $ echo e0 > dir0/child0/e
  $ echo f0 > dir0/child1/f
  $ hg -q commit -A -m 'commit 0'

  $ echo a1 > a
  $ echo d1 > dir0/d
  $ hg commit -m 'commit 1'
  $ echo f0 > dir0/child1/f
  $ hg commit -m 'commit 2'
  nothing changed
  [1]

  $ hg -q up -r 0
  $ echo a2 > a
  $ hg commit -m 'commit 3'
  created new head

  $ hg log -G -T '{rev}:{node} {desc}\n'
  @  2:c8757a2ffe552850d1e0dfe60d295ebf64c196d9 commit 3
  |
  | o  1:650165e803375748a94df471e5b58d85763e0b29 commit 1
  |/
  o  0:6d85ca1270b377d320098556ba5bfad34a9ee12d commit 0
  

  $ hg --debug debugindex -m
     rev linkrev nodeid                                   p1                                       p2
       0       0 1b175b595f022cfab5b809cc0ed551bd0b3ff5e4 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000
       1       1 91e0bdbfb0dde0023fa063edc1445f207a22eac7 1b175b595f022cfab5b809cc0ed551bd0b3ff5e4 0000000000000000000000000000000000000000
       2       2 46a6721b5edaf0ea04b79a5cb3218854a4d2aba0 1b175b595f022cfab5b809cc0ed551bd0b3ff5e4 0000000000000000000000000000000000000000

  $ hg serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Missing arguments is an error

  $ sendhttpv2peer << EOF
  > command manifestdata
  > EOF
  creating http peer for wire protocol version 2
  sending manifestdata command
  abort: missing required arguments: nodes, tree!
  [255]

  $ sendhttpv2peer << EOF
  > command manifestdata
  >     nodes eval:[]
  > EOF
  creating http peer for wire protocol version 2
  sending manifestdata command
  abort: missing required arguments: tree!
  [255]

Unknown node is an error

  $ sendhttpv2peer << EOF
  > command manifestdata
  >     nodes eval:[b'\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa']
  >     tree eval:b''
  > EOF
  creating http peer for wire protocol version 2
  sending manifestdata command
  abort: unknown node: \xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa! (esc)
  [255]

Fetching a single revision returns just metadata by default

  $ sendhttpv2peer << EOF
  > command manifestdata
  >     nodes eval:[b'\x46\xa6\x72\x1b\x5e\xda\xf0\xea\x04\xb7\x9a\x5c\xb3\x21\x88\x54\xa4\xd2\xab\xa0']
  >     tree eval:b''
  > EOF
  creating http peer for wire protocol version 2
  sending manifestdata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'node': b'F\xa6r\x1b^\xda\xf0\xea\x04\xb7\x9a\\\xb3!\x88T\xa4\xd2\xab\xa0'
    }
  ]

Requesting parents works

  $ sendhttpv2peer << EOF
  > command manifestdata
  >     nodes eval:[b'\x46\xa6\x72\x1b\x5e\xda\xf0\xea\x04\xb7\x9a\x5c\xb3\x21\x88\x54\xa4\xd2\xab\xa0']
  >     tree eval:b''
  >     fields eval:[b'parents']
  > EOF
  creating http peer for wire protocol version 2
  sending manifestdata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'node': b'F\xa6r\x1b^\xda\xf0\xea\x04\xb7\x9a\\\xb3!\x88T\xa4\xd2\xab\xa0',
      b'parents': [
        b'\x1b\x17[Y_\x02,\xfa\xb5\xb8\t\xcc\x0e\xd5Q\xbd\x0b?\xf5\xe4',
        b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
      ]
    }
  ]

Requesting revision data works
(haveparents defaults to false, so fulltext is emitted)

  $ sendhttpv2peer << EOF
  > command manifestdata
  >     nodes eval:[b'\x46\xa6\x72\x1b\x5e\xda\xf0\xea\x04\xb7\x9a\x5c\xb3\x21\x88\x54\xa4\xd2\xab\xa0']
  >     tree eval:b''
  >     fields eval:[b'revision']
  > EOF
  creating http peer for wire protocol version 2
  sending manifestdata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          292
        ]
      ],
      b'node': b'F\xa6r\x1b^\xda\xf0\xea\x04\xb7\x9a\\\xb3!\x88T\xa4\xd2\xab\xa0'
    },
    b'a\x000879345e39377229634b420c639454156726c6b6\nb\x00819e258d31a5e1606629f365bb902a1b21ee4216\ndir0/c\x00914445346a0ca0629bd47ceb5dfe07e4d4cf2501\ndir0/child0/e\x00bbba6c06b30f443d34ff841bc985c4d0827c6be4\ndir0/child1/f\x0012fc7dcd773b5a0a929ce195228083c6ddc9cec4\ndir0/d\x00538206dc971e521540d6843abfe6d16032f6d426\n'
  ]

haveparents=False yields same output

  $ sendhttpv2peer << EOF
  > command manifestdata
  >     nodes eval:[b'\x46\xa6\x72\x1b\x5e\xda\xf0\xea\x04\xb7\x9a\x5c\xb3\x21\x88\x54\xa4\xd2\xab\xa0']
  >     tree eval:b''
  >     fields eval:[b'revision']
  >     haveparents eval:False
  > EOF
  creating http peer for wire protocol version 2
  sending manifestdata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          292
        ]
      ],
      b'node': b'F\xa6r\x1b^\xda\xf0\xea\x04\xb7\x9a\\\xb3!\x88T\xa4\xd2\xab\xa0'
    },
    b'a\x000879345e39377229634b420c639454156726c6b6\nb\x00819e258d31a5e1606629f365bb902a1b21ee4216\ndir0/c\x00914445346a0ca0629bd47ceb5dfe07e4d4cf2501\ndir0/child0/e\x00bbba6c06b30f443d34ff841bc985c4d0827c6be4\ndir0/child1/f\x0012fc7dcd773b5a0a929ce195228083c6ddc9cec4\ndir0/d\x00538206dc971e521540d6843abfe6d16032f6d426\n'
  ]

haveparents=True will emit delta

  $ sendhttpv2peer << EOF
  > command manifestdata
  >     nodes eval:[b'\x46\xa6\x72\x1b\x5e\xda\xf0\xea\x04\xb7\x9a\x5c\xb3\x21\x88\x54\xa4\xd2\xab\xa0']
  >     tree eval:b''
  >     fields eval:[b'revision']
  >     haveparents eval:True
  > EOF
  creating http peer for wire protocol version 2
  sending manifestdata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'deltabasenode': b'\x1b\x17[Y_\x02,\xfa\xb5\xb8\t\xcc\x0e\xd5Q\xbd\x0b?\xf5\xe4',
      b'fieldsfollowing': [
        [
          b'delta',
          55
        ]
      ],
      b'node': b'F\xa6r\x1b^\xda\xf0\xea\x04\xb7\x9a\\\xb3!\x88T\xa4\xd2\xab\xa0'
    },
    b'\x00\x00\x00\x00\x00\x00\x00+\x00\x00\x00+a\x000879345e39377229634b420c639454156726c6b6\n'
  ]

Requesting multiple revisions works
(haveparents defaults to false, so fulltext is emitted unless a parent
has been emitted)

  $ sendhttpv2peer << EOF
  > command manifestdata
  >     nodes eval:[b'\x1b\x17\x5b\x59\x5f\x02\x2c\xfa\xb5\xb8\x09\xcc\x0e\xd5\x51\xbd\x0b\x3f\xf5\xe4', b'\x46\xa6\x72\x1b\x5e\xda\xf0\xea\x04\xb7\x9a\x5c\xb3\x21\x88\x54\xa4\xd2\xab\xa0']
  >     tree eval:b''
  >     fields eval:[b'revision']
  > EOF
  creating http peer for wire protocol version 2
  sending manifestdata command
  response: gen[
    {
      b'totalitems': 2
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          292
        ]
      ],
      b'node': b'\x1b\x17[Y_\x02,\xfa\xb5\xb8\t\xcc\x0e\xd5Q\xbd\x0b?\xf5\xe4'
    },
    b'a\x002b4eb07319bfa077a40a2f04913659aef0da42da\nb\x00819e258d31a5e1606629f365bb902a1b21ee4216\ndir0/c\x00914445346a0ca0629bd47ceb5dfe07e4d4cf2501\ndir0/child0/e\x00bbba6c06b30f443d34ff841bc985c4d0827c6be4\ndir0/child1/f\x0012fc7dcd773b5a0a929ce195228083c6ddc9cec4\ndir0/d\x00538206dc971e521540d6843abfe6d16032f6d426\n',
    {
      b'deltabasenode': b'\x1b\x17[Y_\x02,\xfa\xb5\xb8\t\xcc\x0e\xd5Q\xbd\x0b?\xf5\xe4',
      b'fieldsfollowing': [
        [
          b'delta',
          55
        ]
      ],
      b'node': b'F\xa6r\x1b^\xda\xf0\xea\x04\xb7\x9a\\\xb3!\x88T\xa4\xd2\xab\xa0'
    },
    b'\x00\x00\x00\x00\x00\x00\x00+\x00\x00\x00+a\x000879345e39377229634b420c639454156726c6b6\n'
  ]

With haveparents=True, first revision is a delta instead of fulltext

  $ sendhttpv2peer << EOF
  > command manifestdata
  >     nodes eval:[b'\x1b\x17\x5b\x59\x5f\x02\x2c\xfa\xb5\xb8\x09\xcc\x0e\xd5\x51\xbd\x0b\x3f\xf5\xe4', b'\x46\xa6\x72\x1b\x5e\xda\xf0\xea\x04\xb7\x9a\x5c\xb3\x21\x88\x54\xa4\xd2\xab\xa0']
  >     tree eval:b''
  >     fields eval:[b'revision']
  >     haveparents eval:True
  > EOF
  creating http peer for wire protocol version 2
  sending manifestdata command
  response: gen[
    {
      b'totalitems': 2
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          292
        ]
      ],
      b'node': b'\x1b\x17[Y_\x02,\xfa\xb5\xb8\t\xcc\x0e\xd5Q\xbd\x0b?\xf5\xe4'
    },
    b'a\x002b4eb07319bfa077a40a2f04913659aef0da42da\nb\x00819e258d31a5e1606629f365bb902a1b21ee4216\ndir0/c\x00914445346a0ca0629bd47ceb5dfe07e4d4cf2501\ndir0/child0/e\x00bbba6c06b30f443d34ff841bc985c4d0827c6be4\ndir0/child1/f\x0012fc7dcd773b5a0a929ce195228083c6ddc9cec4\ndir0/d\x00538206dc971e521540d6843abfe6d16032f6d426\n',
    {
      b'deltabasenode': b'\x1b\x17[Y_\x02,\xfa\xb5\xb8\t\xcc\x0e\xd5Q\xbd\x0b?\xf5\xe4',
      b'fieldsfollowing': [
        [
          b'delta',
          55
        ]
      ],
      b'node': b'F\xa6r\x1b^\xda\xf0\xea\x04\xb7\x9a\\\xb3!\x88T\xa4\xd2\xab\xa0'
    },
    b'\x00\x00\x00\x00\x00\x00\x00+\x00\x00\x00+a\x000879345e39377229634b420c639454156726c6b6\n'
  ]

Revisions are sorted by DAG order, parents first

  $ sendhttpv2peer << EOF
  > command manifestdata
  >     nodes eval:[b'\x46\xa6\x72\x1b\x5e\xda\xf0\xea\x04\xb7\x9a\x5c\xb3\x21\x88\x54\xa4\xd2\xab\xa0', b'\x1b\x17\x5b\x59\x5f\x02\x2c\xfa\xb5\xb8\x09\xcc\x0e\xd5\x51\xbd\x0b\x3f\xf5\xe4']
  >     tree eval:b''
  >     fields eval:[b'revision']
  > EOF
  creating http peer for wire protocol version 2
  sending manifestdata command
  response: gen[
    {
      b'totalitems': 2
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          292
        ]
      ],
      b'node': b'\x1b\x17[Y_\x02,\xfa\xb5\xb8\t\xcc\x0e\xd5Q\xbd\x0b?\xf5\xe4'
    },
    b'a\x002b4eb07319bfa077a40a2f04913659aef0da42da\nb\x00819e258d31a5e1606629f365bb902a1b21ee4216\ndir0/c\x00914445346a0ca0629bd47ceb5dfe07e4d4cf2501\ndir0/child0/e\x00bbba6c06b30f443d34ff841bc985c4d0827c6be4\ndir0/child1/f\x0012fc7dcd773b5a0a929ce195228083c6ddc9cec4\ndir0/d\x00538206dc971e521540d6843abfe6d16032f6d426\n',
    {
      b'deltabasenode': b'\x1b\x17[Y_\x02,\xfa\xb5\xb8\t\xcc\x0e\xd5Q\xbd\x0b?\xf5\xe4',
      b'fieldsfollowing': [
        [
          b'delta',
          55
        ]
      ],
      b'node': b'F\xa6r\x1b^\xda\xf0\xea\x04\xb7\x9a\\\xb3!\x88T\xa4\xd2\xab\xa0'
    },
    b'\x00\x00\x00\x00\x00\x00\x00+\x00\x00\x00+a\x000879345e39377229634b420c639454156726c6b6\n'
  ]

Requesting parents and revision data works

  $ sendhttpv2peer << EOF
  > command manifestdata
  >     nodes eval:[b'\x1b\x17\x5b\x59\x5f\x02\x2c\xfa\xb5\xb8\x09\xcc\x0e\xd5\x51\xbd\x0b\x3f\xf5\xe4', b'\x46\xa6\x72\x1b\x5e\xda\xf0\xea\x04\xb7\x9a\x5c\xb3\x21\x88\x54\xa4\xd2\xab\xa0']
  >     tree eval:b''
  >     fields eval:[b'parents', b'revision']
  > EOF
  creating http peer for wire protocol version 2
  sending manifestdata command
  response: gen[
    {
      b'totalitems': 2
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          292
        ]
      ],
      b'node': b'\x1b\x17[Y_\x02,\xfa\xb5\xb8\t\xcc\x0e\xd5Q\xbd\x0b?\xf5\xe4',
      b'parents': [
        b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00',
        b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
      ]
    },
    b'a\x002b4eb07319bfa077a40a2f04913659aef0da42da\nb\x00819e258d31a5e1606629f365bb902a1b21ee4216\ndir0/c\x00914445346a0ca0629bd47ceb5dfe07e4d4cf2501\ndir0/child0/e\x00bbba6c06b30f443d34ff841bc985c4d0827c6be4\ndir0/child1/f\x0012fc7dcd773b5a0a929ce195228083c6ddc9cec4\ndir0/d\x00538206dc971e521540d6843abfe6d16032f6d426\n',
    {
      b'deltabasenode': b'\x1b\x17[Y_\x02,\xfa\xb5\xb8\t\xcc\x0e\xd5Q\xbd\x0b?\xf5\xe4',
      b'fieldsfollowing': [
        [
          b'delta',
          55
        ]
      ],
      b'node': b'F\xa6r\x1b^\xda\xf0\xea\x04\xb7\x9a\\\xb3!\x88T\xa4\xd2\xab\xa0',
      b'parents': [
        b'\x1b\x17[Y_\x02,\xfa\xb5\xb8\t\xcc\x0e\xd5Q\xbd\x0b?\xf5\xe4',
        b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
      ]
    },
    b'\x00\x00\x00\x00\x00\x00\x00+\x00\x00\x00+a\x000879345e39377229634b420c639454156726c6b6\n'
  ]

  $ cat error.log