annotate tests/test-histedit-arguments.t @ 23702:c48924787eaa

filectx.parents: enforce changeid of parent to be in own changectx ancestors

Because of the way filenodes are computed, you can have multiple changesets
"introducing" the same file revision. For example, in the changeset graph
below, changeset 2 and 3 both change a file -to- and -from- the same content.

  o 3: content = new
  |
  | o 2: content = new
  |/
  o 1: content = old

In such cases, the file revision is create once, when 2 is added, and just reused
for 3. So the file change in '3' (from "old" to "new)" has no linkrev pointing
to it).  We'll call this situation "linkrev-shadowing". As the linkrev is used for
optimization purposes when walking a file history, the linkrev-shadowing
results in an unexpected jump to another branch during such a walk.. This leads to
multiple bugs with log, annotate and rename detection.

One element to fix such bugs is to ensure that walking the file history sticks on
the same topology as the changeset's history. For this purpose, we extend the
logic in 'basefilectx.parents' so that it always defines the proper changeset
to associate the parent file revision with. This "proper" changeset has to be an
ancestor of the changeset associated with the child file revision.

This logic is performed in the '_adjustlinkrev' function. This function is
given the starting changeset and all the information regarding the parent file
revision. If the linkrev for the file revision is an ancestor of the starting
changeset, the linkrev is valid and will be used. If it is not, we detected a
topological jump caused by linkrev shadowing, we are going to walk the
ancestors of the starting changeset until we find one setting the file to the
revision we are trying to create.

The performance impact appears acceptable:

- We are walking the changelog once for each filelog traversal (as there should
  be no overlap between searches),

- changelog traversal itself is fairly cheap, compared to what is likely going
  to be perform on the result on the filelog traversal,

- We only touch the manifest for ancestors touching the file, And such
  changesets are likely to be the one introducing the file. (except in
  pathological cases involving merge),

- We use manifest diff instead of full manifest unpacking to check manifest
  content, so it does not involve applying multiple diffs in most case.

- linkrev shadowing is not the common case.

Tests for fixed issues in log, annotate and rename detection have been
added.

But this changeset does not solve all problems. It fixes -ancestry-
computation, but if the linkrev-shadowed changesets is the starting one, we'll
still get things wrong. We'll have to fix the bootstrapping of such operations
in a later changeset. Also, the usage of `hg log FILE`  without --follow still
has issues with linkrev pointing to hidden changesets, because it relies on the
`filelog` revset which implement its own traversal logic that is still to be
fixed.

Thanks goes to:
- Matt Mackall: for nudging me in the right direction
- Julien Cristau and Rémi Cardona: for keep telling me linkrev bug were an
  evolution show stopper for 3 years.
- Durham Goode: for finding a new linkrev issue every few weeks
- Mads Kiilerich: for that last rename bug who raise this topic over my
  anoyance limit.

Test argument handling and various data parsing
==================================================


Enable extensions used by this test.
  $ cat >>$HGRCPATH <<EOF
  > [extensions]
  > histedit=
  > EOF

Repo setup.
  $ hg init foo
  $ cd foo
  $ echo alpha >> alpha
  $ hg addr
  adding alpha
  $ hg ci -m one
  $ echo alpha >> alpha
  $ hg ci -m two
  $ echo alpha >> alpha
  $ hg ci -m three
  $ echo alpha >> alpha
  $ hg ci -m four
  $ echo alpha >> alpha
  $ hg ci -m five

  $ hg log --style compact --graph
  @  4[tip]   08d98a8350f3   1970-01-01 00:00 +0000   test
  |    five
  |
  o  3   c8e68270e35a   1970-01-01 00:00 +0000   test
  |    four
  |
  o  2   eb57da33312f   1970-01-01 00:00 +0000   test
  |    three
  |
  o  1   579e40513370   1970-01-01 00:00 +0000   test
  |    two
  |
  o  0   6058cbb6cfd7   1970-01-01 00:00 +0000   test
       one
  

histedit --continue/--abort with no existing state
--------------------------------------------------

  $ hg histedit --continue
  abort: no histedit in progress
  [255]
  $ hg histedit --abort
  abort: no histedit in progress
  [255]

Run a dummy edit to make sure we get tip^^ correctly via revsingle.
--------------------------------------------------------------------

  $ HGEDITOR=cat hg histedit "tip^^"
  pick eb57da33312f 2 three
  pick c8e68270e35a 3 four
  pick 08d98a8350f3 4 five
  
  # Edit history between eb57da33312f and 08d98a8350f3
  #
  # Commits are listed from least to most recent
  #
  # Commands:
  #  p, pick = use commit
  #  e, edit = use commit, but stop for amending
  #  f, fold = use commit, but combine it with the one above
  #  r, roll = like fold, but discard this commit's description
  #  d, drop = remove commit from history
  #  m, mess = edit message without changing commit content
  #
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

Run on a revision not ancestors of the current working directory.
--------------------------------------------------------------------

  $ hg up 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg histedit -r 4
  abort: 08d98a8350f3 is not an ancestor of working directory
  [255]
  $ hg up --quiet


Test that we pick the minimum of a revrange
---------------------------------------

  $ HGEDITOR=cat hg histedit '2::' --commands - << EOF
  > pick eb57da33312f 2 three
  > pick c8e68270e35a 3 four
  > pick 08d98a8350f3 4 five
  > EOF
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg up --quiet

  $ HGEDITOR=cat hg histedit 'tip:2' --commands - << EOF
  > pick eb57da33312f 2 three
  > pick c8e68270e35a 3 four
  > pick 08d98a8350f3 4 five
  > EOF
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg up --quiet

Run on a revision not descendants of the initial parent
--------------------------------------------------------------------

Test the message shown for inconsistent histedit state, which may be
created (and forgotten) by Mercurial earlier than 2.7. This emulates
Mercurial earlier than 2.7 by renaming ".hg/histedit-state"
temporarily.

  $ HGEDITOR=cat hg histedit -r 4 --commands - << EOF
  > edit 08d98a8350f3 4 five
  > EOF
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  reverting alpha
  Make changes as needed, you may commit or record as needed now.
  When you are finished, run hg histedit --continue to resume.
  [1]

  $ mv .hg/histedit-state .hg/histedit-state.back
  $ hg update --quiet --clean 2
  $ mv .hg/histedit-state.back .hg/histedit-state

  $ hg histedit --continue
  abort: c8e68270e35a is not an ancestor of working directory
  (use "histedit --abort" to clear broken state)
  [255]

  $ hg histedit --abort
  $ hg update --quiet --clean

Test that missing revisions are detected
---------------------------------------

  $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
  > pick eb57da33312f 2 three
  > pick 08d98a8350f3 4 five
  > EOF
  abort: missing rules for changeset c8e68270e35a
  (do you want to use the drop action?)
  [255]

Test that extra revisions are detected
---------------------------------------

  $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
  > pick 6058cbb6cfd7 0 one
  > pick c8e68270e35a 3 four
  > pick 08d98a8350f3 4 five
  > EOF
  abort: may not use changesets other than the ones listed
  [255]

Test malformed line
---------------------------------------

  $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
  > pickeb57da33312f2three
  > pick c8e68270e35a 3 four
  > pick 08d98a8350f3 4 five
  > EOF
  abort: malformed line "pickeb57da33312f2three"
  [255]

Test unknown changeset
---------------------------------------

  $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
  > pick 0123456789ab 2 three
  > pick c8e68270e35a 3 four
  > pick 08d98a8350f3 4 five
  > EOF
  abort: unknown changeset 0123456789ab listed
  [255]

Test unknown command
---------------------------------------

  $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
  > coin eb57da33312f 2 three
  > pick c8e68270e35a 3 four
  > pick 08d98a8350f3 4 five
  > EOF
  abort: unknown action "coin"
  [255]

Test duplicated changeset
---------------------------------------

So one is missing and one appear twice.

  $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
  > pick eb57da33312f 2 three
  > pick eb57da33312f 2 three
  > pick 08d98a8350f3 4 five
  > EOF
  abort: duplicated command for changeset eb57da33312f
  [255]

Test short version of command
---------------------------------------

Note: we use varying amounts of white space between command name and changeset
short hash. This tests issue3893.

  $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
  > pick eb57da33312f 2 three
  > p    c8e68270e35a 3 four
  > f 08d98a8350f3 4 five
  > EOF
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  reverting alpha
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  four
  ***
  five
  
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to abort commit.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: changed alpha
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  saved backup bundle to $TESTTMP/foo/.hg/strip-backup/*-backup.hg (glob)

  $ hg update -q 2
  $ echo x > x
  $ hg add x
  $ hg commit -m'x' x
  created new head
  $ hg histedit -r 'heads(all())'
  abort: The specified revisions must have exactly one common root
  [255]

Test that trimming description using multi-byte characters
--------------------------------------------------------------------

  $ python <<EOF
  > fp = open('logfile', 'w')
  > fp.write('12345678901234567890123456789012345678901234567890' +
  >          '12345') # there are 5 more columns for 80 columns
  > 
  > # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
  > fp.write(u'\u3042\u3044\u3046\u3048'.encode('utf-8'))
  > 
  > fp.close()
  > EOF
  $ echo xx >> x
  $ hg --encoding utf-8 commit --logfile logfile

  $ HGEDITOR=cat hg --encoding utf-8 histedit tip
  pick 3d3ea1f3a10b 5 1234567890123456789012345678901234567890123456789012345\xe3\x81\x82... (esc)
  
  # Edit history between 3d3ea1f3a10b and 3d3ea1f3a10b
  #
  # Commits are listed from least to most recent
  #
  # Commands:
  #  p, pick = use commit
  #  e, edit = use commit, but stop for amending
  #  f, fold = use commit, but combine it with the one above
  #  r, roll = like fold, but discard this commit's description
  #  d, drop = remove commit from history
  #  m, mess = edit message without changing commit content
  #
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved