annotate tests/test-init.t @ 23702:c48924787eaa

filectx.parents: enforce changeid of parent to be in own changectx ancestors

Because of the way filenodes are computed, you can have multiple changesets
"introducing" the same file revision. For example, in the changeset graph
below, changeset 2 and 3 both change a file -to- and -from- the same content.

  o 3: content = new
  |
  | o 2: content = new
  |/
  o 1: content = old

In such cases, the file revision is create once, when 2 is added, and just reused
for 3. So the file change in '3' (from "old" to "new)" has no linkrev pointing
to it).  We'll call this situation "linkrev-shadowing". As the linkrev is used for
optimization purposes when walking a file history, the linkrev-shadowing
results in an unexpected jump to another branch during such a walk.. This leads to
multiple bugs with log, annotate and rename detection.

One element to fix such bugs is to ensure that walking the file history sticks on
the same topology as the changeset's history. For this purpose, we extend the
logic in 'basefilectx.parents' so that it always defines the proper changeset
to associate the parent file revision with. This "proper" changeset has to be an
ancestor of the changeset associated with the child file revision.

This logic is performed in the '_adjustlinkrev' function. This function is
given the starting changeset and all the information regarding the parent file
revision. If the linkrev for the file revision is an ancestor of the starting
changeset, the linkrev is valid and will be used. If it is not, we detected a
topological jump caused by linkrev shadowing, we are going to walk the
ancestors of the starting changeset until we find one setting the file to the
revision we are trying to create.

The performance impact appears acceptable:

- We are walking the changelog once for each filelog traversal (as there should
  be no overlap between searches),

- changelog traversal itself is fairly cheap, compared to what is likely going
  to be perform on the result on the filelog traversal,

- We only touch the manifest for ancestors touching the file, And such
  changesets are likely to be the one introducing the file. (except in
  pathological cases involving merge),

- We use manifest diff instead of full manifest unpacking to check manifest
  content, so it does not involve applying multiple diffs in most case.

- linkrev shadowing is not the common case.

Tests for fixed issues in log, annotate and rename detection have been
added.

But this changeset does not solve all problems. It fixes -ancestry-
computation, but if the linkrev-shadowed changesets is the starting one, we'll
still get things wrong. We'll have to fix the bootstrapping of such operations
in a later changeset. Also, the usage of `hg log FILE`  without --follow still
has issues with linkrev pointing to hidden changesets, because it relies on the
`filelog` revset which implement its own traversal logic that is still to be
fixed.

Thanks goes to:
- Matt Mackall: for nudging me in the right direction
- Julien Cristau and Rémi Cardona: for keep telling me linkrev bug were an
  evolution show stopper for 3 years.
- Durham Goode: for finding a new linkrev issue every few weeks
- Mads Kiilerich: for that last rename bug who raise this topic over my
  anoyance limit.

This test tries to exercise the ssh functionality with a dummy script

  $ checknewrepo()
  > {
  >    name=$1
  >    if [ -d "$name"/.hg/store ]; then
  >    echo store created
  >    fi
  >    if [ -f "$name"/.hg/00changelog.i ]; then
  >    echo 00changelog.i created
  >    fi
  >    cat "$name"/.hg/requires
  > }

creating 'local'

  $ hg init local
  $ checknewrepo local
  store created
  00changelog.i created
  dotencode
  fncache
  revlogv1
  store
  $ echo this > local/foo
  $ hg ci --cwd local -A -m "init"
  adding foo

test custom revlog chunk cache sizes

  $ hg --config format.chunkcachesize=0 log -R local -pv
  abort: revlog chunk cache size 0 is not greater than 0!
  [255]
  $ hg --config format.chunkcachesize=1023 log -R local -pv
  abort: revlog chunk cache size 1023 is not a power of 2!
  [255]
  $ hg --config format.chunkcachesize=1024 log -R local -pv
  changeset:   0:08b9e9f63b32
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       foo
  description:
  init
  
  
  diff -r 000000000000 -r 08b9e9f63b32 foo
  --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -0,0 +1,1 @@
  +this
  

creating repo with format.usestore=false

  $ hg --config format.usestore=false init old
  $ checknewrepo old
  revlogv1

creating repo with format.usefncache=false

  $ hg --config format.usefncache=false init old2
  $ checknewrepo old2
  store created
  00changelog.i created
  revlogv1
  store

creating repo with format.dotencode=false

  $ hg --config format.dotencode=false init old3
  $ checknewrepo old3
  store created
  00changelog.i created
  fncache
  revlogv1
  store

test failure

  $ hg init local
  abort: repository local already exists!
  [255]

init+push to remote2

  $ hg init -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2
  $ hg incoming -R remote2 local
  comparing with local
  changeset:   0:08b9e9f63b32
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     init
  

  $ hg push -R local -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2
  pushing to ssh://user@dummy/remote2
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

clone to remote1

  $ hg clone -e "python \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

init to existing repo

  $ hg init -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote1
  abort: repository remote1 already exists!
  abort: could not create remote repo!
  [255]

clone to existing repo

  $ hg clone -e "python \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1
  abort: repository remote1 already exists!
  abort: could not create remote repo!
  [255]

output of dummyssh

  $ cat dummylog
  Got arguments 1:user@dummy 2:hg init remote2
  Got arguments 1:user@dummy 2:hg -R remote2 serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote2 serve --stdio
  Got arguments 1:user@dummy 2:hg init remote1
  Got arguments 1:user@dummy 2:hg -R remote1 serve --stdio
  Got arguments 1:user@dummy 2:hg init remote1
  Got arguments 1:user@dummy 2:hg init remote1

comparing repositories

  $ hg tip -q -R local
  0:08b9e9f63b32
  $ hg tip -q -R remote1
  0:08b9e9f63b32
  $ hg tip -q -R remote2
  0:08b9e9f63b32

check names for repositories (clashes with URL schemes, special chars)

  $ for i in bundle file hg http https old-http ssh static-http "with space"; do
  >   printf "hg init \"$i\"... "
  >   hg init "$i"
  >   test -d "$i" -a -d "$i/.hg" && echo "ok" || echo "failed"
  > done
  hg init "bundle"... ok
  hg init "file"... ok
  hg init "hg"... ok
  hg init "http"... ok
  hg init "https"... ok
  hg init "old-http"... ok
  hg init "ssh"... ok
  hg init "static-http"... ok
  hg init "with space"... ok
#if eol-in-paths
/* " " is not a valid name for a directory on Windows */
  $ hg init " "
  $ test -d " "
  $ test -d " /.hg"
#endif

creating 'local/sub/repo'

  $ hg init local/sub/repo
  $ checknewrepo local/sub/repo
  store created
  00changelog.i created
  dotencode
  fncache
  revlogv1
  store

prepare test of init of url configured from paths

  $ echo '[paths]' >> $HGRCPATH
  $ echo "somewhere = `pwd`/url from paths" >> $HGRCPATH
  $ echo "elsewhere = `pwd`/another paths url" >> $HGRCPATH

init should (for consistency with clone) expand the url

  $ hg init somewhere
  $ checknewrepo "url from paths"
  store created
  00changelog.i created
  dotencode
  fncache
  revlogv1
  store

verify that clone also expand urls

  $ hg clone somewhere elsewhere
  updating to branch default
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ checknewrepo "another paths url"
  store created
  00changelog.i created
  dotencode
  fncache
  revlogv1
  store

clone bookmarks

  $ hg -R local bookmark test
  $ hg -R local bookmarks
   * test                      0:08b9e9f63b32
  $ hg clone -e "python \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote-bookmarks
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  exporting bookmark test
  $ hg -R remote-bookmarks bookmarks
     test                      0:08b9e9f63b32