tests/test-largefiles.t

largefiles: drop repo wrapping detection

After 257afe5489d4 I see:

  $ hg id -q
  largefiles: repo method 'commit' appears to have already been wrapped by another extension: largefiles may behave incorrectly
  largefiles: repo method 'push' appears to have already been wrapped by another extension: largefiles may behave incorrectly
  be207d9b7e4b

The warning is bad:

* The message gives no hint what the problem is and how it can be resolved.
  The message is useless.

* Largefiles do have its share of problems, but I don't think I ever have seen
  a problem where this warning would have helped. The 'may' in the warning
  seems like an exaggeration of the risk. Having largefiles enabled in
  combination with for instance mq, hggit and hgsubversion causes a warning
  (depending on the configuration order) but do not cause problems. Extensions
  might of course be incompatible, but they can be that in many other ways.
  The check and the message are incorrect.

It would thus be better to remove the check and the warning completely.

Before 257afe5489d4 the check always failed. That change made the check work
more like intended ... but the intention was wrong. This change will thus also
back that change out.

  $ USERCACHE="$TESTTMP/cache"; export USERCACHE
  $ mkdir "${USERCACHE}"
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > largefiles=
  > purge=
  > rebase=
  > transplant=
  > [phases]
  > publish=False
  > [largefiles]
  > minsize=2
  > patterns=glob:**.dat
  > usercache=${USERCACHE}
  > [hooks]
  > precommit=sh -c "echo \\"Invoking status precommit hook\\"; hg status"
  > EOF

Create the repo with a couple of revisions of both large and normal
files.
Test status and dirstate of largefiles and that summary output is correct.

  $ hg init a
  $ cd a
  $ mkdir sub
  $ echo normal1 > normal1
  $ echo normal2 > sub/normal2
  $ echo large1 > large1
  $ echo large2 > sub/large2
  $ hg add normal1 sub/normal2
  $ hg add --large large1 sub/large2
  $ hg commit -m "add files"
  Invoking status precommit hook
  A large1
  A normal1
  A sub/large2
  A sub/normal2
  $ touch large1 sub/large2
  $ sleep 1
  $ hg st
  $ hg debugstate --nodates
  n 644         41 .hglf/large1
  n 644         41 .hglf/sub/large2
  n 644          8 normal1
  n 644          8 sub/normal2
  $ hg debugstate --large
  n 644          7 large1
  n 644          7 sub/large2
  $ echo normal11 > normal1
  $ echo normal22 > sub/normal2
  $ echo large11 > large1
  $ echo large22 > sub/large2
  $ hg commit -m "edit files"
  Invoking status precommit hook
  M large1
  M normal1
  M sub/large2
  M sub/normal2
  $ hg sum --large
  parent: 1:ce8896473775 tip
   edit files
  branch: default
  commit: (clean)
  update: (current)
  largefiles: (no remote repo)

Commit preserved largefile contents.

  $ cat normal1
  normal11
  $ cat large1
  large11
  $ cat sub/normal2
  normal22
  $ cat sub/large2
  large22

Test status, subdir and unknown files

  $ echo unknown > sub/unknown
  $ hg st --all
  ? sub/unknown
  C large1
  C normal1
  C sub/large2
  C sub/normal2
  $ hg st --all sub
  ? sub/unknown
  C sub/large2
  C sub/normal2
  $ rm sub/unknown

Test messages and exit codes for remove warning cases

  $ hg remove -A large1
  not removing large1: file still exists
  [1]
  $ echo 'modified' > large1
  $ hg remove large1
  not removing large1: file is modified (use -f to force removal)
  [1]
  $ echo 'new' > normalnew
  $ hg add normalnew
  $ echo 'new' > largenew
  $ hg add --large normalnew
  normalnew already tracked!
  $ hg remove normalnew largenew
  not removing largenew: file is untracked
  not removing normalnew: file has been marked for add (use forget to undo)
  [1]
  $ rm normalnew largenew
  $ hg up -Cq

Remove both largefiles and normal files.

  $ hg remove normal1 large1
  $ hg status large1
  R large1
  $ hg commit -m "remove files"
  Invoking status precommit hook
  R large1
  R normal1
  $ ls
  sub
  $ echo "testlargefile" > large1-test
  $ hg add --large large1-test
  $ hg st
  A large1-test
  $ hg rm large1-test
  not removing large1-test: file has been marked for add (use forget to undo)
  [1]
  $ hg st
  A large1-test
  $ hg forget large1-test
  $ hg st
  ? large1-test
  $ hg remove large1-test
  not removing large1-test: file is untracked
  [1]
  $ hg forget large1-test
  not removing large1-test: file is already untracked
  [1]
  $ rm large1-test

Copy both largefiles and normal files (testing that status output is correct).

  $ hg cp sub/normal2 normal1
  $ hg cp sub/large2 large1
  $ hg commit -m "copy files"
  Invoking status precommit hook
  A large1
  A normal1
  $ cat normal1
  normal22
  $ cat large1
  large22

Test moving largefiles and verify that normal files are also unaffected.

  $ hg mv normal1 normal3
  $ hg mv large1 large3
  $ hg mv sub/normal2 sub/normal4
  $ hg mv sub/large2 sub/large4
  $ hg commit -m "move files"
  Invoking status precommit hook
  A large3
  A normal3
  A sub/large4
  A sub/normal4
  R large1
  R normal1
  R sub/large2
  R sub/normal2
  $ cat normal3
  normal22
  $ cat large3
  large22
  $ cat sub/normal4
  normal22
  $ cat sub/large4
  large22

Test copies and moves from a directory other than root (issue3516)

  $ cd ..
  $ hg init lf_cpmv
  $ cd lf_cpmv
  $ mkdir dira
  $ mkdir dira/dirb
  $ touch dira/dirb/largefile
  $ hg add --large dira/dirb/largefile
  $ hg commit -m "added"
  Invoking status precommit hook
  A dira/dirb/largefile
  $ cd dira
  $ hg cp dirb/largefile foo/largefile
  $ hg ci -m "deep copy"
  Invoking status precommit hook
  A dira/foo/largefile
  $ find . | sort
  .
  ./dirb
  ./dirb/largefile
  ./foo
  ./foo/largefile
  $ hg mv foo/largefile baz/largefile
  $ hg ci -m "moved"
  Invoking status precommit hook
  A dira/baz/largefile
  R dira/foo/largefile
  $ find . | sort
  .
  ./baz
  ./baz/largefile
  ./dirb
  ./dirb/largefile
  ./foo
  $ cd ../../a

#if serve
Test display of largefiles in hgweb

  $ hg serve -d -p $HGPORT --pid-file ../hg.pid
  $ cat ../hg.pid >> $DAEMON_PIDS
  $ "$TESTDIR/get-with-headers.py" 127.0.0.1:$HGPORT 'file/tip/?style=raw'
  200 Script output follows
  
  
  drwxr-xr-x sub
  -rw-r--r-- 41 large3
  -rw-r--r-- 9 normal3
  
  
  $ "$TESTDIR/get-with-headers.py" 127.0.0.1:$HGPORT 'file/tip/sub/?style=raw'
  200 Script output follows
  
  
  -rw-r--r-- 41 large4
  -rw-r--r-- 9 normal4
  
  
  $ "$TESTDIR/killdaemons.py" $DAEMON_PIDS
#endif

Test archiving the various revisions.  These hit corner cases known with
archiving.

  $ hg archive -r 0 ../archive0
  $ hg archive -r 1 ../archive1
  $ hg archive -r 2 ../archive2
  $ hg archive -r 3 ../archive3
  $ hg archive -r 4 ../archive4
  $ cd ../archive0
  $ cat normal1
  normal1
  $ cat large1
  large1
  $ cat sub/normal2
  normal2
  $ cat sub/large2
  large2
  $ cd ../archive1
  $ cat normal1
  normal11
  $ cat large1
  large11
  $ cat sub/normal2
  normal22
  $ cat sub/large2
  large22
  $ cd ../archive2
  $ ls
  sub
  $ cat sub/normal2
  normal22
  $ cat sub/large2
  large22
  $ cd ../archive3
  $ cat normal1
  normal22
  $ cat large1
  large22
  $ cat sub/normal2
  normal22
  $ cat sub/large2
  large22
  $ cd ../archive4
  $ cat normal3
  normal22
  $ cat large3
  large22
  $ cat sub/normal4
  normal22
  $ cat sub/large4
  large22

Commit corner case: specify files to commit.

  $ cd ../a
  $ echo normal3 > normal3
  $ echo large3 > large3
  $ echo normal4 > sub/normal4
  $ echo large4 > sub/large4
  $ hg commit normal3 large3 sub/normal4 sub/large4 -m "edit files again"
  Invoking status precommit hook
  M large3
  M normal3
  M sub/large4
  M sub/normal4
  $ cat normal3
  normal3
  $ cat large3
  large3
  $ cat sub/normal4
  normal4
  $ cat sub/large4
  large4

One more commit corner case: commit from a subdirectory.

  $ cd ../a
  $ echo normal33 > normal3
  $ echo large33 > large3
  $ echo normal44 > sub/normal4
  $ echo large44 > sub/large4
  $ cd sub
  $ hg commit -m "edit files yet again"
  Invoking status precommit hook
  M large3
  M normal3
  M sub/large4
  M sub/normal4
  $ cat ../normal3
  normal33
  $ cat ../large3
  large33
  $ cat normal4
  normal44
  $ cat large4
  large44

Committing standins is not allowed.

  $ cd ..
  $ echo large3 > large3
  $ hg commit .hglf/large3 -m "try to commit standin"
  abort: file ".hglf/large3" is a largefile standin
  (commit the largefile itself instead)
  [255]

Corner cases for adding largefiles.

  $ echo large5 > large5
  $ hg add --large large5
  $ hg add --large large5
  large5 already a largefile
  $ mkdir sub2
  $ echo large6 > sub2/large6
  $ echo large7 > sub2/large7
  $ hg add --large sub2
  adding sub2/large6 as a largefile (glob)
  adding sub2/large7 as a largefile (glob)
  $ hg st
  M large3
  A large5
  A sub2/large6
  A sub2/large7

Committing directories containing only largefiles.

  $ mkdir -p z/y/x/m
  $ touch z/y/x/m/large1
  $ touch z/y/x/large2
  $ hg add --large z/y/x/m/large1 z/y/x/large2
  $ hg commit -m "Subdir with directory only containing largefiles" z
  Invoking status precommit hook
  M large3
  A large5
  A sub2/large6
  A sub2/large7
  A z/y/x/large2
  A z/y/x/m/large1
  $ hg rollback --quiet
  $ touch z/y/x/m/normal
  $ hg add z/y/x/m/normal
  $ hg commit -m "Subdir with mixed contents" z
  Invoking status precommit hook
  M large3
  A large5
  A sub2/large6
  A sub2/large7
  A z/y/x/large2
  A z/y/x/m/large1
  A z/y/x/m/normal
  $ hg st
  M large3
  A large5
  A sub2/large6
  A sub2/large7
  $ hg rollback --quiet
  $ hg revert z/y/x/large2 z/y/x/m/large1
  $ rm z/y/x/large2 z/y/x/m/large1
  $ hg commit -m "Subdir with normal contents" z
  Invoking status precommit hook
  M large3
  A large5
  A sub2/large6
  A sub2/large7
  A z/y/x/m/normal
  $ hg st
  M large3
  A large5
  A sub2/large6
  A sub2/large7
  $ hg rollback --quiet
  $ hg revert --quiet z
  $ hg commit -m "Empty subdir" z
  abort: z: no match under directory!
  [255]
  $ rm -rf z
  $ hg ci -m "standin" .hglf
  abort: file ".hglf" is a largefile standin
  (commit the largefile itself instead)
  [255]

Test "hg status" with combination of 'file pattern' and 'directory
pattern' for largefiles:

  $ hg status sub2/large6 sub2
  A sub2/large6
  A sub2/large7

Config settings (pattern **.dat, minsize 2 MB) are respected.

  $ echo testdata > test.dat
  $ dd bs=1k count=2k if=/dev/zero of=reallylarge > /dev/null 2> /dev/null
  $ hg add
  adding reallylarge as a largefile
  adding test.dat as a largefile

Test that minsize and --lfsize handle float values;
also tests that --lfsize overrides largefiles.minsize.
(0.250 MB = 256 kB = 262144 B)

  $ dd if=/dev/zero of=ratherlarge bs=1024 count=256 > /dev/null 2> /dev/null
  $ dd if=/dev/zero of=medium bs=1024 count=128 > /dev/null 2> /dev/null
  $ hg --config largefiles.minsize=.25 add
  adding ratherlarge as a largefile
  adding medium
  $ hg forget medium
  $ hg --config largefiles.minsize=.25 add --lfsize=.125
  adding medium as a largefile
  $ dd if=/dev/zero of=notlarge bs=1024 count=127 > /dev/null 2> /dev/null
  $ hg --config largefiles.minsize=.25 add --lfsize=.125
  adding notlarge
  $ hg forget notlarge

Test forget on largefiles.

  $ hg forget large3 large5 test.dat reallylarge ratherlarge medium
  $ hg commit -m "add/edit more largefiles"
  Invoking status precommit hook
  A sub2/large6
  A sub2/large7
  R large3
  ? large5
  ? medium
  ? notlarge
  ? ratherlarge
  ? reallylarge
  ? test.dat
  $ hg st
  ? large3
  ? large5
  ? medium
  ? notlarge
  ? ratherlarge
  ? reallylarge
  ? test.dat

Purge with largefiles: verify that largefiles are still in the working
dir after a purge.

  $ hg purge --all
  $ cat sub/large4
  large44
  $ cat sub2/large6
  large6
  $ cat sub2/large7
  large7

Test addremove: verify that files that should be added as largfiles are added as
such and that already-existing largfiles are not added as normal files by
accident.

  $ rm normal3
  $ rm sub/large4
  $ echo "testing addremove with patterns" > testaddremove.dat
  $ echo "normaladdremove" > normaladdremove
  $ hg addremove
  removing sub/large4
  adding testaddremove.dat as a largefile
  removing normal3
  adding normaladdremove

Test addremove with -R

  $ hg up -C
  getting changed largefiles
  1 largefiles updated, 0 removed
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm normal3
  $ rm sub/large4
  $ echo "testing addremove with patterns" > testaddremove.dat
  $ echo "normaladdremove" > normaladdremove
  $ cd ..
  $ hg -R a addremove
  removing sub/large4
  adding a/testaddremove.dat as a largefile (glob)
  removing normal3
  adding normaladdremove
  $ cd a

Test 3364
  $ hg clone . ../addrm
  updating to branch default
  getting changed largefiles
  3 largefiles updated, 0 removed
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd ../addrm
  $ cat >> .hg/hgrc <<EOF
  > [hooks]
  > post-commit.stat=sh -c "echo \\"Invoking status postcommit hook\\"; hg status -A"
  > EOF
  $ touch foo
  $ hg add --large foo
  $ hg ci -m "add foo"
  Invoking status precommit hook
  A foo
  Invoking status postcommit hook
  C foo
  C normal3
  C sub/large4
  C sub/normal4
  C sub2/large6
  C sub2/large7
  $ rm foo
  $ hg st
  ! foo
hmm.. no precommit invoked, but there is a postcommit??
  $ hg ci -m "will not checkin"
  nothing changed
  Invoking status postcommit hook
  ! foo
  C normal3
  C sub/large4
  C sub/normal4
  C sub2/large6
  C sub2/large7
  [1]
  $ hg addremove
  removing foo
  $ hg st
  R foo
  $ hg ci -m "used to say nothing changed"
  Invoking status precommit hook
  R foo
  Invoking status postcommit hook
  C normal3
  C sub/large4
  C sub/normal4
  C sub2/large6
  C sub2/large7
  $ hg st

Test 3507 (both normal files and largefiles were a problem)

  $ touch normal
  $ touch large
  $ hg add normal
  $ hg add --large large
  $ hg ci -m "added"
  Invoking status precommit hook
  A large
  A normal
  Invoking status postcommit hook
  C large
  C normal
  C normal3
  C sub/large4
  C sub/normal4
  C sub2/large6
  C sub2/large7
  $ hg remove normal
  $ hg addremove --traceback
  $ hg ci -m "addremoved normal"
  Invoking status precommit hook
  R normal
  Invoking status postcommit hook
  C large
  C normal3
  C sub/large4
  C sub/normal4
  C sub2/large6
  C sub2/large7
  $ hg up -C '.^'
  getting changed largefiles
  0 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg remove large
  $ hg addremove --traceback
  $ hg ci -m "removed large"
  Invoking status precommit hook
  R large
  created new head
  Invoking status postcommit hook
  C normal
  C normal3
  C sub/large4
  C sub/normal4
  C sub2/large6
  C sub2/large7

Test commit -A (issue 3542)
  $ echo large8 > large8
  $ hg add --large large8
  $ hg ci -Am 'this used to add large8 as normal and commit both'
  Invoking status precommit hook
  A large8
  Invoking status postcommit hook
  C large8
  C normal
  C normal3
  C sub/large4
  C sub/normal4
  C sub2/large6
  C sub2/large7
  $ rm large8
  $ hg ci -Am 'this used to not notice the rm'
  removing large8
  Invoking status precommit hook
  R large8
  Invoking status postcommit hook
  C normal
  C normal3
  C sub/large4
  C sub/normal4
  C sub2/large6
  C sub2/large7

Test that a standin can't be added as a large file

  $ touch large
  $ hg add --large large
  $ hg ci -m "add"
  Invoking status precommit hook
  A large
  Invoking status postcommit hook
  C large
  C normal
  C normal3
  C sub/large4
  C sub/normal4
  C sub2/large6
  C sub2/large7
  $ hg remove large
  $ touch large
  $ hg addremove --config largefiles.patterns=**large --traceback
  adding large as a largefile

Test that outgoing --large works (with revsets too)
  $ hg outgoing --rev '.^' --large
  comparing with $TESTTMP/a (glob)
  searching for changes
  changeset:   8:c02fd3b77ec4
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     add foo
  
  changeset:   9:289dd08c9bbb
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     used to say nothing changed
  
  changeset:   10:34f23ac6ac12
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     added
  
  changeset:   12:710c1b2f523c
  parent:      10:34f23ac6ac12
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     removed large
  
  changeset:   13:0a3e75774479
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     this used to add large8 as normal and commit both
  
  changeset:   14:84f3d378175c
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     this used to not notice the rm
  
  searching for changes
  largefiles to upload:
  foo
  large
  large8
  
  $ cd ../a

Clone a largefiles repo.

  $ hg clone . ../b
  updating to branch default
  getting changed largefiles
  3 largefiles updated, 0 removed
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd ../b
  $ hg log --template '{rev}:{node|short}  {desc|firstline}\n'
  7:daea875e9014  add/edit more largefiles
  6:4355d653f84f  edit files yet again
  5:9d5af5072dbd  edit files again
  4:74c02385b94c  move files
  3:9e8fbc4bce62  copy files
  2:51a0ae4d5864  remove files
  1:ce8896473775  edit files
  0:30d30fe6a5be  add files
  $ cat normal3
  normal33
  $ cat sub/normal4
  normal44
  $ cat sub/large4
  large44
  $ cat sub2/large6
  large6
  $ cat sub2/large7
  large7
  $ cd ..
  $ hg clone a -r 3 c
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 10 changes to 4 files
  updating to branch default
  getting changed largefiles
  2 largefiles updated, 0 removed
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd c
  $ hg log --template '{rev}:{node|short}  {desc|firstline}\n'
  3:9e8fbc4bce62  copy files
  2:51a0ae4d5864  remove files
  1:ce8896473775  edit files
  0:30d30fe6a5be  add files
  $ cat normal1
  normal22
  $ cat large1
  large22
  $ cat sub/normal2
  normal22
  $ cat sub/large2
  large22

Old revisions of a clone have correct largefiles content (this also
tests update).

  $ hg update -r 1
  getting changed largefiles
  1 largefiles updated, 0 removed
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat large1
  large11
  $ cat sub/large2
  large22
  $ cd ..

Test cloning with --all-largefiles flag

  $ rm "${USERCACHE}"/*
  $ hg clone --all-largefiles a a-backup
  updating to branch default
  getting changed largefiles
  3 largefiles updated, 0 removed
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  8 additional largefiles cached

  $ rm "${USERCACHE}"/*
  $ hg clone --all-largefiles -u 0 a a-clone0
  updating to branch default
  getting changed largefiles
  2 largefiles updated, 0 removed
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  9 additional largefiles cached
  $ hg -R a-clone0 sum
  parent: 0:30d30fe6a5be 
   add files
  branch: default
  commit: (clean)
  update: 7 new changesets (update)

  $ rm "${USERCACHE}"/*
  $ hg clone --all-largefiles -u 1 a a-clone1
  updating to branch default
  getting changed largefiles
  2 largefiles updated, 0 removed
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  8 additional largefiles cached
  $ hg -R a-clone1 verify --large --lfa --lfc
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  10 files, 8 changesets, 24 total revisions
  searching 8 changesets for largefiles
  verified contents of 13 revisions of 6 largefiles
  $ hg -R a-clone1 sum
  parent: 1:ce8896473775 
   edit files
  branch: default
  commit: (clean)
  update: 6 new changesets (update)

  $ rm "${USERCACHE}"/*
  $ hg clone --all-largefiles -U a a-clone-u
  11 additional largefiles cached
  $ hg -R a-clone-u sum
  parent: -1:000000000000  (no revision checked out)
  branch: default
  commit: (clean)
  update: 8 new changesets (update)

Show computed destination directory:

  $ mkdir xyz
  $ cd xyz
  $ hg clone ../a
  destination directory: a
  updating to branch default
  getting changed largefiles
  3 largefiles updated, 0 removed
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd ..

Clone URL without path:

  $ hg clone file://
  abort: repository / not found!
  [255]

Ensure base clone command argument validation

  $ hg clone -U -u 0 a a-clone-failure
  abort: cannot specify both --noupdate and --updaterev
  [255]

  $ hg clone --all-largefiles a ssh://localhost/a
  abort: --all-largefiles is incompatible with non-local destination ssh://localhost/a
  [255]

Test pulling with --all-largefiles flag.  Also test that the largefiles are
downloaded from 'default' instead of 'default-push' when no source is specified
(issue3584)

  $ rm -Rf a-backup
  $ hg clone -r 1 a a-backup
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 8 changes to 4 files
  updating to branch default
  getting changed largefiles
  2 largefiles updated, 0 removed
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm "${USERCACHE}"/*
  $ cd a-backup
  $ hg pull --all-largefiles --config paths.default-push=bogus/path
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 16 changes to 8 files
  (run 'hg update' to get a working copy)
  6 largefiles cached

redo pull with --lfrev and check it pulls largefiles for the right revs

  $ hg rollback
  repository tip rolled back to revision 1 (undo pull)
  $ hg pull -v --lfrev 'heads(pulled())+min(pulled())'
  pulling from $TESTTMP/a (glob)
  searching for changes
  all local heads known remotely
  6 changesets found
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 16 changes to 8 files
  calling hook changegroup.lfiles: <function checkrequireslfiles at *> (glob)
  (run 'hg update' to get a working copy)
  pulling largefiles for revision 7
  found 971fb41e78fea4f8e0ba5244784239371cb00591 in store
  found 0d6d75887db61b2c7e6c74b5dd8fc6ad50c0cc30 in store
  found bb3151689acb10f0c3125c560d5e63df914bc1af in store
  pulling largefiles for revision 2
  found eb7338044dc27f9bc59b8dd5a246b065ead7a9c4 in store
  0 largefiles cached

lfpull

  $ hg lfpull -r : --config largefiles.usercache=usercache-lfpull
  2 largefiles cached
  $ hg lfpull -v -r 4+2 --config largefiles.usercache=usercache-lfpull
  pulling largefiles for revision 4
  found eb7338044dc27f9bc59b8dd5a246b065ead7a9c4 in store
  found eb7338044dc27f9bc59b8dd5a246b065ead7a9c4 in store
  pulling largefiles for revision 2
  found eb7338044dc27f9bc59b8dd5a246b065ead7a9c4 in store
  0 largefiles cached

  $ ls usercache-lfpull/* | sort
  usercache-lfpull/1deebade43c8c498a3c8daddac0244dc55d1331d
  usercache-lfpull/4669e532d5b2c093a78eca010077e708a071bb64

  $ cd ..

Rebasing between two repositories does not revert largefiles to old
revisions (this was a very bad bug that took a lot of work to fix).

  $ hg clone a d
  updating to branch default
  getting changed largefiles
  3 largefiles updated, 0 removed
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd b
  $ echo large4-modified > sub/large4
  $ echo normal3-modified > normal3
  $ hg commit -m "modify normal file and largefile in repo b"
  Invoking status precommit hook
  M normal3
  M sub/large4
  $ cd ../d
  $ echo large6-modified > sub2/large6
  $ echo normal4-modified > sub/normal4
  $ hg commit -m "modify normal file largefile in repo d"
  Invoking status precommit hook
  M sub/normal4
  M sub2/large6
  $ cd ..
  $ hg clone d e
  updating to branch default
  getting changed largefiles
  3 largefiles updated, 0 removed
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd d

More rebase testing, but also test that the largefiles are downloaded from
'default-push' when no source is specified (issue3584). (The largefile from the
pulled revision is however not downloaded but found in the local cache.)
Largefiles are fetched for the new pulled revision, not for existing revisions,
rebased or not.

  $ [ ! -f .hg/largefiles/e166e74c7303192238d60af5a9c4ce9bef0b7928 ]
  $ hg pull --rebase --all-largefiles --config paths.default-push=bogus/path --config paths.default=../b
  pulling from $TESTTMP/b (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 2 changes to 2 files (+1 heads)
  Invoking status precommit hook
  M sub/normal4
  M sub2/large6
  saved backup bundle to $TESTTMP/d/.hg/strip-backup/f574fb32bb45-backup.hg (glob)
  0 largefiles cached
  nothing to rebase
  $ [ -f .hg/largefiles/e166e74c7303192238d60af5a9c4ce9bef0b7928 ]
  $ hg log --template '{rev}:{node|short}  {desc|firstline}\n'
  9:598410d3eb9a  modify normal file largefile in repo d
  8:a381d2c8c80e  modify normal file and largefile in repo b
  7:daea875e9014  add/edit more largefiles
  6:4355d653f84f  edit files yet again
  5:9d5af5072dbd  edit files again
  4:74c02385b94c  move files
  3:9e8fbc4bce62  copy files
  2:51a0ae4d5864  remove files
  1:ce8896473775  edit files
  0:30d30fe6a5be  add files
  $ cat normal3
  normal3-modified
  $ cat sub/normal4
  normal4-modified
  $ cat sub/large4
  large4-modified
  $ cat sub2/large6
  large6-modified
  $ cat sub2/large7
  large7
  $ cd ../e
  $ hg pull ../b
  pulling from ../b
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 2 changes to 2 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg rebase
  Invoking status precommit hook
  M sub/normal4
  M sub2/large6
  saved backup bundle to $TESTTMP/e/.hg/strip-backup/f574fb32bb45-backup.hg (glob)
  $ hg log --template '{rev}:{node|short}  {desc|firstline}\n'
  9:598410d3eb9a  modify normal file largefile in repo d
  8:a381d2c8c80e  modify normal file and largefile in repo b
  7:daea875e9014  add/edit more largefiles
  6:4355d653f84f  edit files yet again
  5:9d5af5072dbd  edit files again
  4:74c02385b94c  move files
  3:9e8fbc4bce62  copy files
  2:51a0ae4d5864  remove files
  1:ce8896473775  edit files
  0:30d30fe6a5be  add files
  $ cat normal3
  normal3-modified
  $ cat sub/normal4
  normal4-modified
  $ cat sub/large4
  large4-modified
  $ cat sub2/large6
  large6-modified
  $ cat sub2/large7
  large7

Log on largefiles

- same output
  $ hg log --template '{rev}:{node|short}  {desc|firstline}\n' .hglf/sub/large4
  8:a381d2c8c80e  modify normal file and largefile in repo b
  6:4355d653f84f  edit files yet again
  5:9d5af5072dbd  edit files again
  4:74c02385b94c  move files
  $ hg log --template '{rev}:{node|short}  {desc|firstline}\n' sub/large4
  8:a381d2c8c80e  modify normal file and largefile in repo b
  6:4355d653f84f  edit files yet again
  5:9d5af5072dbd  edit files again
  4:74c02385b94c  move files

- .hglf only matches largefiles, without .hglf it matches 9 bco sub/normal
  $ hg log --template '{rev}:{node|short}  {desc|firstline}\n' .hglf/sub
  8:a381d2c8c80e  modify normal file and largefile in repo b
  6:4355d653f84f  edit files yet again
  5:9d5af5072dbd  edit files again
  4:74c02385b94c  move files
  1:ce8896473775  edit files
  0:30d30fe6a5be  add files
  $ hg log --template '{rev}:{node|short}  {desc|firstline}\n' sub
  9:598410d3eb9a  modify normal file largefile in repo d
  8:a381d2c8c80e  modify normal file and largefile in repo b
  6:4355d653f84f  edit files yet again
  5:9d5af5072dbd  edit files again
  4:74c02385b94c  move files
  1:ce8896473775  edit files
  0:30d30fe6a5be  add files

- globbing gives same result
  $ hg log --template '{rev}:{node|short}  {desc|firstline}\n' 'glob:sub/*'
  9:598410d3eb9a  modify normal file largefile in repo d
  8:a381d2c8c80e  modify normal file and largefile in repo b
  6:4355d653f84f  edit files yet again
  5:9d5af5072dbd  edit files again
  4:74c02385b94c  move files
  1:ce8896473775  edit files
  0:30d30fe6a5be  add files

Rollback on largefiles.

  $ echo large4-modified-again > sub/large4
  $ hg commit -m "Modify large4 again"
  Invoking status precommit hook
  M sub/large4
  $ hg rollback
  repository tip rolled back to revision 9 (undo commit)
  working directory now based on revision 9
  $ hg st
  M sub/large4
  $ hg log --template '{rev}:{node|short}  {desc|firstline}\n'
  9:598410d3eb9a  modify normal file largefile in repo d
  8:a381d2c8c80e  modify normal file and largefile in repo b
  7:daea875e9014  add/edit more largefiles
  6:4355d653f84f  edit files yet again
  5:9d5af5072dbd  edit files again
  4:74c02385b94c  move files
  3:9e8fbc4bce62  copy files
  2:51a0ae4d5864  remove files
  1:ce8896473775  edit files
  0:30d30fe6a5be  add files
  $ cat sub/large4
  large4-modified-again

"update --check" refuses to update with uncommitted changes.
  $ hg update --check 8
  abort: uncommitted local changes
  [255]

"update --clean" leaves correct largefiles in working copy, even when there is
.orig files from revert in .hglf.

  $ echo mistake > sub2/large7
  $ hg revert sub2/large7
  $ hg -q update --clean -r null
  $ hg update --clean
  getting changed largefiles
  3 largefiles updated, 0 removed
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat normal3
  normal3-modified
  $ cat sub/normal4
  normal4-modified
  $ cat sub/large4
  large4-modified
  $ cat sub2/large6
  large6-modified
  $ cat sub2/large7
  large7
  $ cat sub2/large7.orig
  mistake
  $ cat .hglf/sub2/large7.orig
  9dbfb2c79b1c40981b258c3efa1b10b03f18ad31

demonstrate misfeature: .orig file is overwritten on every update -C,
also when clean:
  $ hg update --clean
  getting changed largefiles
  0 largefiles updated, 0 removed
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat sub2/large7.orig
  large7
  $ rm sub2/large7.orig .hglf/sub2/large7.orig

Now "update check" is happy.
  $ hg update --check 8
  getting changed largefiles
  1 largefiles updated, 0 removed
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg update --check
  getting changed largefiles
  1 largefiles updated, 0 removed
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

Test removing empty largefiles directories on update
  $ test -d sub2 && echo "sub2 exists"
  sub2 exists
  $ hg update -q null
  $ test -d sub2 && echo "error: sub2 should not exist anymore"
  [1]
  $ hg update -q

Test hg remove removes empty largefiles directories
  $ test -d sub2 && echo "sub2 exists"
  sub2 exists
  $ hg remove sub2/*
  $ test -d sub2 && echo "error: sub2 should not exist anymore"
  [1]
  $ hg revert sub2/large6 sub2/large7

"revert" works on largefiles (and normal files too).
  $ echo hack3 >> normal3
  $ echo hack4 >> sub/normal4
  $ echo hack4 >> sub/large4
  $ rm sub2/large6
  $ hg revert sub2/large6
  $ hg rm sub2/large6
  $ echo new >> sub2/large8
  $ hg add --large sub2/large8
# XXX we don't really want to report that we're reverting the standin;
# that's just an implementation detail. But I don't see an obvious fix. ;-(
  $ hg revert sub
  reverting .hglf/sub/large4 (glob)
  reverting sub/normal4 (glob)
  $ hg status
  M normal3
  A sub2/large8
  R sub2/large6
  ? sub/large4.orig
  ? sub/normal4.orig
  $ cat sub/normal4
  normal4-modified
  $ cat sub/large4
  large4-modified
  $ hg revert -a --no-backup
  undeleting .hglf/sub2/large6 (glob)
  forgetting .hglf/sub2/large8 (glob)
  reverting normal3
  $ hg status
  ? sub/large4.orig
  ? sub/normal4.orig
  ? sub2/large8
  $ cat normal3
  normal3-modified
  $ cat sub2/large6
  large6-modified
  $ rm sub/*.orig sub2/large8

revert some files to an older revision
  $ hg revert --no-backup -r 8 sub2
  reverting .hglf/sub2/large6 (glob)
  $ cat sub2/large6
  large6
  $ hg revert --no-backup -C -r '.^' sub2
  reverting .hglf/sub2/large6 (glob)
  $ hg revert --no-backup sub2
  reverting .hglf/sub2/large6 (glob)
  $ hg status

"verify --large" actually verifies largefiles

- Where Do We Come From? What Are We? Where Are We Going?
  $ pwd
  $TESTTMP/e
  $ hg paths
  default = $TESTTMP/d (glob)

  $ hg verify --large
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  10 files, 10 changesets, 28 total revisions
  searching 1 changesets for largefiles
  verified existence of 3 revisions of 3 largefiles

- introduce missing blob in local store repo and make sure that this is caught:
  $ mv $TESTTMP/d/.hg/largefiles/e166e74c7303192238d60af5a9c4ce9bef0b7928 .
  $ hg verify --large
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  10 files, 10 changesets, 28 total revisions
  searching 1 changesets for largefiles
  changeset 9:598410d3eb9a: sub/large4 references missing $TESTTMP/d/.hg/largefiles/e166e74c7303192238d60af5a9c4ce9bef0b7928 (glob)
  verified existence of 3 revisions of 3 largefiles
  [1]

- introduce corruption and make sure that it is caught when checking content:
  $ echo '5 cents' > $TESTTMP/d/.hg/largefiles/e166e74c7303192238d60af5a9c4ce9bef0b7928
  $ hg verify -q --large --lfc
  changeset 9:598410d3eb9a: sub/large4 references corrupted $TESTTMP/d/.hg/largefiles/e166e74c7303192238d60af5a9c4ce9bef0b7928 (glob)
  [1]

- cleanup
  $ mv e166e74c7303192238d60af5a9c4ce9bef0b7928 $TESTTMP/d/.hg/largefiles/

- verifying all revisions will fail because we didn't clone all largefiles to d:
  $ echo 'T-shirt' > $TESTTMP/d/.hg/largefiles/eb7338044dc27f9bc59b8dd5a246b065ead7a9c4
  $ hg verify -q --lfa --lfc
  changeset 0:30d30fe6a5be: large1 references missing $TESTTMP/d/.hg/largefiles/4669e532d5b2c093a78eca010077e708a071bb64 (glob)
  changeset 0:30d30fe6a5be: sub/large2 references missing $TESTTMP/d/.hg/largefiles/1deebade43c8c498a3c8daddac0244dc55d1331d (glob)
  changeset 1:ce8896473775: large1 references missing $TESTTMP/d/.hg/largefiles/5f78770c0e77ba4287ad6ef3071c9bf9c379742f (glob)
  changeset 1:ce8896473775: sub/large2 references corrupted $TESTTMP/d/.hg/largefiles/eb7338044dc27f9bc59b8dd5a246b065ead7a9c4 (glob)
  changeset 3:9e8fbc4bce62: large1 references corrupted $TESTTMP/d/.hg/largefiles/eb7338044dc27f9bc59b8dd5a246b065ead7a9c4 (glob)
  changeset 4:74c02385b94c: large3 references corrupted $TESTTMP/d/.hg/largefiles/eb7338044dc27f9bc59b8dd5a246b065ead7a9c4 (glob)
  changeset 4:74c02385b94c: sub/large4 references corrupted $TESTTMP/d/.hg/largefiles/eb7338044dc27f9bc59b8dd5a246b065ead7a9c4 (glob)
  changeset 5:9d5af5072dbd: large3 references missing $TESTTMP/d/.hg/largefiles/baaf12afde9d8d67f25dab6dced0d2bf77dba47c (glob)
  changeset 5:9d5af5072dbd: sub/large4 references missing $TESTTMP/d/.hg/largefiles/aeb2210d19f02886dde00dac279729a48471e2f9 (glob)
  changeset 6:4355d653f84f: large3 references missing $TESTTMP/d/.hg/largefiles/7838695e10da2bb75ac1156565f40a2595fa2fa0 (glob)
  [1]

- cleanup
  $ rm $TESTTMP/d/.hg/largefiles/eb7338044dc27f9bc59b8dd5a246b065ead7a9c4
  $ rm -f .hglf/sub/*.orig

Update to revision with missing largefile - and make sure it really is missing

  $ rm ${USERCACHE}/7838695e10da2bb75ac1156565f40a2595fa2fa0
  $ hg up -r 6
  getting changed largefiles
  large3: largefile 7838695e10da2bb75ac1156565f40a2595fa2fa0 not available from file:$TESTTMP/d
  1 largefiles updated, 2 removed
  4 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ rm normal3
  $ echo >> sub/normal4
  $ hg ci -m 'commit with missing files'
  Invoking status precommit hook
  M sub/normal4
  ! large3
  ! normal3
  created new head
  $ hg st
  ! large3
  ! normal3
  $ hg up -r.
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg st
  ! large3
  ! normal3
  $ hg up -Cr.
  getting changed largefiles
  large3: largefile 7838695e10da2bb75ac1156565f40a2595fa2fa0 not available from file:$TESTTMP/d
  0 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg st
  ! large3
  $ hg rollback
  repository tip rolled back to revision 9 (undo commit)
  working directory now based on revision 6

Merge with revision with missing largefile - and make sure it tries to fetch it.

  $ hg up -Cqr null
  $ echo f > f
  $ hg ci -Am branch
  adding f
  Invoking status precommit hook
  A f
  created new head
  $ hg merge -r 6
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  getting changed largefiles
  large3: largefile 7838695e10da2bb75ac1156565f40a2595fa2fa0 not available from file:$TESTTMP/d
  1 largefiles updated, 0 removed

  $ hg rollback -q
  $ hg up -Cq

Pulling 0 revisions with --all-largefiles should not fetch for all revisions

  $ hg pull --all-largefiles
  pulling from $TESTTMP/d (glob)
  searching for changes
  no changes found

Merging does not revert to old versions of largefiles and also check
that merging after having pulled from a non-default remote works
correctly.

  $ cd ..
  $ hg clone -r 7 e temp
  adding changesets
  adding manifests
  adding file changes
  added 8 changesets with 24 changes to 10 files
  updating to branch default
  getting changed largefiles
  3 largefiles updated, 0 removed
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone temp f
  updating to branch default
  getting changed largefiles
  3 largefiles updated, 0 removed
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
# Delete the largefiles in the largefiles system cache so that we have an
# opportunity to test that caching after a pull works.
  $ rm "${USERCACHE}"/*
  $ cd f
  $ echo "large4-merge-test" > sub/large4
  $ hg commit -m "Modify large4 to test merge"
  Invoking status precommit hook
  M sub/large4
# Test --cache-largefiles flag
  $ hg pull --lfrev 'heads(pulled())' ../e
  pulling from ../e
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 4 changes to 4 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  2 largefiles cached
  $ hg merge
  merging sub/large4
  largefile sub/large4 has a merge conflict
  keep (l)ocal or take (o)ther? l
  3 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  getting changed largefiles
  1 largefiles updated, 0 removed
  $ hg commit -m "Merge repos e and f"
  Invoking status precommit hook
  M normal3
  M sub/normal4
  M sub2/large6
  $ cat normal3
  normal3-modified
  $ cat sub/normal4
  normal4-modified
  $ cat sub/large4
  large4-merge-test
  $ cat sub2/large6
  large6-modified
  $ cat sub2/large7
  large7

Test status after merging with a branch that introduces a new largefile:

  $ echo large > large
  $ hg add --large large
  $ hg commit -m 'add largefile'
  Invoking status precommit hook
  A large
  $ hg update -q ".^"
  $ echo change >> normal3
  $ hg commit -m 'some change'
  Invoking status precommit hook
  M normal3
  created new head
  $ hg merge
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  getting changed largefiles
  1 largefiles updated, 0 removed
  $ hg status
  M large

- make sure update of merge with removed largefiles fails as expected
  $ hg rm sub2/large6
  $ hg up -r.
  abort: outstanding uncommitted merges
  [255]

- revert should be able to revert files introduced in a pending merge
  $ hg revert --all -r .
  removing .hglf/large (glob)
  undeleting .hglf/sub2/large6 (glob)

Test that a normal file and a largefile with the same name and path cannot
coexist.

  $ rm sub2/large7
  $ echo "largeasnormal" > sub2/large7
  $ hg add sub2/large7
  sub2/large7 already a largefile

Test that transplanting a largefile change works correctly.

  $ cd ..
  $ hg clone -r 8 d g
  adding changesets
  adding manifests
  adding file changes
  added 9 changesets with 26 changes to 10 files
  updating to branch default
  getting changed largefiles
  3 largefiles updated, 0 removed
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd g
  $ hg transplant -s ../d 598410d3eb9a
  searching for changes
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 2 changes to 2 files
  getting changed largefiles
  1 largefiles updated, 0 removed
  $ hg log --template '{rev}:{node|short}  {desc|firstline}\n'
  9:598410d3eb9a  modify normal file largefile in repo d
  8:a381d2c8c80e  modify normal file and largefile in repo b
  7:daea875e9014  add/edit more largefiles
  6:4355d653f84f  edit files yet again
  5:9d5af5072dbd  edit files again
  4:74c02385b94c  move files
  3:9e8fbc4bce62  copy files
  2:51a0ae4d5864  remove files
  1:ce8896473775  edit files
  0:30d30fe6a5be  add files
  $ cat normal3
  normal3-modified
  $ cat sub/normal4
  normal4-modified
  $ cat sub/large4
  large4-modified
  $ cat sub2/large6
  large6-modified
  $ cat sub2/large7
  large7

Cat a largefile
  $ hg cat normal3
  normal3-modified
  $ hg cat sub/large4
  large4-modified
  $ rm "${USERCACHE}"/*
  $ hg cat -r a381d2c8c80e -o cat.out sub/large4
  $ cat cat.out
  large4-modified
  $ rm cat.out
  $ hg cat -r a381d2c8c80e normal3
  normal3-modified
  $ hg cat -r '.^' normal3
  normal3-modified
  $ hg cat -r '.^' sub/large4 doesntexist
  large4-modified
  doesntexist: no such file in rev a381d2c8c80e
  $ hg --cwd sub cat -r '.^' large4
  large4-modified
  $ hg --cwd sub cat -r '.^' ../normal3
  normal3-modified

Test that renaming a largefile results in correct output for status

  $ hg rename sub/large4 large4-renamed
  $ hg commit -m "test rename output"
  Invoking status precommit hook
  A large4-renamed
  R sub/large4
  $ cat large4-renamed
  large4-modified
  $ cd sub2
  $ hg rename large6 large6-renamed
  $ hg st
  A sub2/large6-renamed
  R sub2/large6
  $ cd ..

Test --normal flag

  $ dd if=/dev/zero bs=2k count=11k > new-largefile 2> /dev/null
  $ hg add --normal --large new-largefile
  abort: --normal cannot be used with --large
  [255]
  $ hg add --normal new-largefile
  new-largefile: up to 69 MB of RAM may be required to manage this file
  (use 'hg revert new-largefile' to cancel the pending addition)
  $ cd ..

#if serve
vanilla clients not locked out from largefiles servers on vanilla repos
  $ mkdir r1
  $ cd r1
  $ hg init
  $ echo c1 > f1
  $ hg add f1
  $ hg commit -m "m1"
  Invoking status precommit hook
  A f1
  $ cd ..
  $ hg serve -R r1 -d -p $HGPORT --pid-file hg.pid
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg --config extensions.largefiles=! clone http://localhost:$HGPORT r2
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

largefiles clients still work with vanilla servers
  $ hg --config extensions.largefiles=! serve -R r1 -d -p $HGPORT1 --pid-file hg.pid
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg clone http://localhost:$HGPORT1 r3
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
#endif


vanilla clients locked out from largefiles http repos
  $ mkdir r4
  $ cd r4
  $ hg init
  $ echo c1 > f1
  $ hg add --large f1
  $ hg commit -m "m1"
  Invoking status precommit hook
  A f1
  $ cd ..

largefiles can be pushed locally (issue3583)
  $ hg init dest
  $ cd r4
  $ hg outgoing ../dest
  comparing with ../dest
  searching for changes
  changeset:   0:639881c12b4c
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     m1
  
  $ hg push ../dest
  pushing to ../dest
  searching for changes
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

exit code with nothing outgoing (issue3611)
  $ hg outgoing ../dest
  comparing with ../dest
  searching for changes
  no changes found
  [1]
  $ cd ..

#if serve
  $ hg serve -R r4 -d -p $HGPORT2 --pid-file hg.pid
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg --config extensions.largefiles=! clone http://localhost:$HGPORT2 r5
  abort: remote error:
  
  This repository uses the largefiles extension.
  
  Please enable it in your Mercurial config file.
  [255]

used all HGPORTs, kill all daemons
  $ "$TESTDIR/killdaemons.py" $DAEMON_PIDS
#endif

vanilla clients locked out from largefiles ssh repos
  $ hg --config extensions.largefiles=! clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/r4 r5
  abort: remote error:
  
  This repository uses the largefiles extension.
  
  Please enable it in your Mercurial config file.
  [255]

#if serve

largefiles clients refuse to push largefiles repos to vanilla servers
  $ mkdir r6
  $ cd r6
  $ hg init
  $ echo c1 > f1
  $ hg add f1
  $ hg commit -m "m1"
  Invoking status precommit hook
  A f1
  $ cat >> .hg/hgrc <<!
  > [web]
  > push_ssl = false
  > allow_push = *
  > !
  $ cd ..
  $ hg clone r6 r7
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd r7
  $ echo c2 > f2
  $ hg add --large f2
  $ hg commit -m "m2"
  Invoking status precommit hook
  A f2
  $ hg --config extensions.largefiles=! -R ../r6 serve -d -p $HGPORT --pid-file ../hg.pid
  $ cat ../hg.pid >> $DAEMON_PIDS
  $ hg push http://localhost:$HGPORT
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: http://localhost:$HGPORT/ does not appear to be a largefile store
  [255]
  $ cd ..

putlfile errors are shown (issue3123)
Corrupt the cached largefile in r7 and move it out of the servers usercache
  $ mv r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8 .
  $ echo 'client side corruption' > r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8
  $ rm "$USERCACHE/4cdac4d8b084d0b599525cf732437fb337d422a8"
  $ hg init empty
  $ hg serve -R empty -d -p $HGPORT1 --pid-file hg.pid \
  >   --config 'web.allow_push=*' --config web.push_ssl=False
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg push -R r7 http://localhost:$HGPORT1
  pushing to http://localhost:$HGPORT1/
  searching for changes
  remote: largefiles: failed to put 4cdac4d8b084d0b599525cf732437fb337d422a8 into store: largefile contents do not match hash
  abort: remotestore: could not put $TESTTMP/r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8 to remote store http://localhost:$HGPORT1/ (glob)
  [255]
  $ mv 4cdac4d8b084d0b599525cf732437fb337d422a8 r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8
Push of file that exists on server but is corrupted - magic healing would be nice ... but too magic
  $ echo "server side corruption" > empty/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8
  $ hg push -R r7 http://localhost:$HGPORT1
  pushing to http://localhost:$HGPORT1/
  searching for changes
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 2 changesets with 2 changes to 2 files
  $ cat empty/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8
  server side corruption
  $ rm -rf empty

Push a largefiles repository to a served empty repository
  $ hg init r8
  $ echo c3 > r8/f1
  $ hg add --large r8/f1 -R r8
  $ hg commit -m "m1" -R r8
  Invoking status precommit hook
  A f1
  $ hg init empty
  $ hg serve -R empty -d -p $HGPORT2 --pid-file hg.pid \
  >   --config 'web.allow_push=*' --config web.push_ssl=False
  $ cat hg.pid >> $DAEMON_PIDS
  $ rm "${USERCACHE}"/*
  $ hg push -R r8 http://localhost:$HGPORT2/#default
  pushing to http://localhost:$HGPORT2/
  searching for changes
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  $ [ -f "${USERCACHE}"/02a439e5c31c526465ab1a0ca1f431f76b827b90 ]
  $ [ -f empty/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90 ]

Clone over http, no largefiles pulled on clone.

  $ hg clone http://localhost:$HGPORT2/#default http-clone -U
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

test 'verify' with remotestore:

  $ rm "${USERCACHE}"/02a439e5c31c526465ab1a0ca1f431f76b827b90
  $ mv empty/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90 .
  $ hg -R http-clone verify --large --lfa
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 1 changesets, 1 total revisions
  searching 1 changesets for largefiles
  changeset 0:cf03e5bb9936: f1 missing
  verified existence of 1 revisions of 1 largefiles
  [1]
  $ mv 02a439e5c31c526465ab1a0ca1f431f76b827b90 empty/.hg/largefiles/
  $ hg -R http-clone -q verify --large --lfa

largefiles pulled on update - a largefile missing on the server:
  $ mv empty/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90 .
  $ hg -R http-clone up --config largefiles.usercache=http-clone-usercache
  getting changed largefiles
  f1: largefile 02a439e5c31c526465ab1a0ca1f431f76b827b90 not available from http://localhost:$HGPORT2/
  0 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R http-clone st
  ! f1
  $ hg -R http-clone up -Cqr null

largefiles pulled on update - a largefile corrupted on the server:
  $ echo corruption > empty/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90
  $ hg -R http-clone up --config largefiles.usercache=http-clone-usercache
  getting changed largefiles
  f1: data corruption (expected 02a439e5c31c526465ab1a0ca1f431f76b827b90, got 6a7bb2556144babe3899b25e5428123735bb1e27)
  0 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R http-clone st
  ! f1
  $ [ ! -f http-clone/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90 ]
  $ [ ! -f http-clone/f1 ]
  $ [ ! -f http-clone-usercache ]
  $ hg -R http-clone verify --large --lfc
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 1 changesets, 1 total revisions
  searching 1 changesets for largefiles
  verified contents of 1 revisions of 1 largefiles
  $ hg -R http-clone up -Cqr null

largefiles pulled on update - no server side problems:
  $ mv 02a439e5c31c526465ab1a0ca1f431f76b827b90 empty/.hg/largefiles/
  $ hg -R http-clone --debug up --config largefiles.usercache=http-clone-usercache
  resolving manifests
   branchmerge: False, force: False, partial: False
   ancestor: 000000000000, local: 000000000000+, remote: cf03e5bb9936
   .hglf/f1: remote created -> g
  getting .hglf/f1
  updating: .hglf/f1 1/1 files (100.00%)
  getting changed largefiles
  using http://localhost:$HGPORT2/
  sending capabilities command
  sending batch command
  getting largefiles: 0/1 lfile (0.00%)
  getting f1:02a439e5c31c526465ab1a0ca1f431f76b827b90
  sending getlfile command
  found 02a439e5c31c526465ab1a0ca1f431f76b827b90 in store
  1 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ ls http-clone-usercache/*
  http-clone-usercache/02a439e5c31c526465ab1a0ca1f431f76b827b90

  $ rm -rf empty http-clone*

used all HGPORTs, kill all daemons
  $ "$TESTDIR/killdaemons.py" $DAEMON_PIDS

#endif


#if unix-permissions

Clone a local repository owned by another user
We have to simulate that here by setting $HOME and removing write permissions
  $ ORIGHOME="$HOME"
  $ mkdir alice
  $ HOME="`pwd`/alice"
  $ cd alice
  $ hg init pubrepo
  $ cd pubrepo
  $ dd if=/dev/zero bs=1k count=11k > a-large-file 2> /dev/null
  $ hg add --large a-large-file
  $ hg commit -m "Add a large file"
  Invoking status precommit hook
  A a-large-file
  $ cd ..
  $ chmod -R a-w pubrepo
  $ cd ..
  $ mkdir bob
  $ HOME="`pwd`/bob"
  $ cd bob
  $ hg clone --pull ../alice/pubrepo pubrepo
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  updating to branch default
  getting changed largefiles
  1 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd ..
  $ chmod -R u+w alice/pubrepo
  $ HOME="$ORIGHOME"

#endif

#if symlink

Symlink to a large largefile should behave the same as a symlink to a normal file
  $ hg init largesymlink
  $ cd largesymlink
  $ dd if=/dev/zero bs=1k count=10k of=largefile 2>/dev/null
  $ hg add --large largefile
  $ hg commit -m "commit a large file"
  Invoking status precommit hook
  A largefile
  $ ln -s largefile largelink
  $ hg add largelink
  $ hg commit -m "commit a large symlink"
  Invoking status precommit hook
  A largelink
  $ rm -f largelink
  $ hg up >/dev/null
  $ test -f largelink
  [1]
  $ test -L largelink
  [1]
  $ rm -f largelink # make next part of the test independent of the previous
  $ hg up -C >/dev/null
  $ test -f largelink
  $ test -L largelink
  $ cd ..

#endif

test for pattern matching on 'hg status':
to boost performance, largefiles checks whether specified patterns are
related to largefiles in working directory (NOT to STANDIN) or not.

  $ hg init statusmatch
  $ cd statusmatch

  $ mkdir -p a/b/c/d
  $ echo normal > a/b/c/d/e.normal.txt
  $ hg add a/b/c/d/e.normal.txt
  $ echo large > a/b/c/d/e.large.txt
  $ hg add --large a/b/c/d/e.large.txt
  $ mkdir -p a/b/c/x
  $ echo normal > a/b/c/x/y.normal.txt
  $ hg add a/b/c/x/y.normal.txt
  $ hg commit -m 'add files'
  Invoking status precommit hook
  A a/b/c/d/e.large.txt
  A a/b/c/d/e.normal.txt
  A a/b/c/x/y.normal.txt

(1) no pattern: no performance boost
  $ hg status -A
  C a/b/c/d/e.large.txt
  C a/b/c/d/e.normal.txt
  C a/b/c/x/y.normal.txt

(2) pattern not related to largefiles: performance boost
  $ hg status -A a/b/c/x
  C a/b/c/x/y.normal.txt

(3) pattern related to largefiles: no performance boost
  $ hg status -A a/b/c/d
  C a/b/c/d/e.large.txt
  C a/b/c/d/e.normal.txt

(4) pattern related to STANDIN (not to largefiles): performance boost
  $ hg status -A .hglf/a
  C .hglf/a/b/c/d/e.large.txt

(5) mixed case: no performance boost
  $ hg status -A a/b/c/x a/b/c/d
  C a/b/c/d/e.large.txt
  C a/b/c/d/e.normal.txt
  C a/b/c/x/y.normal.txt

verify that largefiles doesn't break filesets

  $ hg log --rev . --exclude "set:binary()"
  changeset:   0:41bd42f10efa
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     add files
  
verify that large files in subrepos handled properly
  $ hg init subrepo
  $ echo "subrepo = subrepo" > .hgsub
  $ hg add .hgsub
  $ hg ci -m "add subrepo"
  Invoking status precommit hook
  A .hgsub
  ? .hgsubstate
  $ echo "rev 1" > subrepo/large.txt
  $ hg -R subrepo add --large subrepo/large.txt
  $ hg sum
  parent: 1:8ee150ea2e9c tip
   add subrepo
  branch: default
  commit: 1 subrepos
  update: (current)
  $ hg st
  $ hg st -S
  A subrepo/large.txt
  $ hg ci -S -m "commit top repo"
  committing subrepository subrepo
  Invoking status precommit hook
  A large.txt
  Invoking status precommit hook
  M .hgsubstate
# No differences
  $ hg st -S
  $ hg sum
  parent: 2:ce4cd0c527a6 tip
   commit top repo
  branch: default
  commit: (clean)
  update: (current)
  $ echo "rev 2" > subrepo/large.txt
  $ hg st -S
  M subrepo/large.txt
  $ hg sum
  parent: 2:ce4cd0c527a6 tip
   commit top repo
  branch: default
  commit: 1 subrepos
  update: (current)
  $ hg ci -m "this commit should fail without -S"
  abort: uncommitted changes in subrepo subrepo
  (use --subrepos for recursive commit)
  [255]

Add a normal file to the subrepo, then test archiving

  $ echo 'normal file' > subrepo/normal.txt
  $ hg -R subrepo add subrepo/normal.txt

Lock in subrepo, otherwise the change isn't archived

  $ hg ci -S -m "add normal file to top level"
  committing subrepository subrepo
  Invoking status precommit hook
  M large.txt
  A normal.txt
  Invoking status precommit hook
  M .hgsubstate
  $ hg archive -S ../lf_subrepo_archive
  $ find ../lf_subrepo_archive | sort
  ../lf_subrepo_archive
  ../lf_subrepo_archive/.hg_archival.txt
  ../lf_subrepo_archive/.hgsub
  ../lf_subrepo_archive/.hgsubstate
  ../lf_subrepo_archive/a
  ../lf_subrepo_archive/a/b
  ../lf_subrepo_archive/a/b/c
  ../lf_subrepo_archive/a/b/c/d
  ../lf_subrepo_archive/a/b/c/d/e.large.txt
  ../lf_subrepo_archive/a/b/c/d/e.normal.txt
  ../lf_subrepo_archive/a/b/c/x
  ../lf_subrepo_archive/a/b/c/x/y.normal.txt
  ../lf_subrepo_archive/subrepo
  ../lf_subrepo_archive/subrepo/large.txt
  ../lf_subrepo_archive/subrepo/normal.txt

Test update with subrepos.

  $ hg update 0
  getting changed largefiles
  0 largefiles updated, 1 removed
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg status -S
  $ hg update tip
  getting changed largefiles
  1 largefiles updated, 0 removed
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg status -S
# modify a large file
  $ echo "modified" > subrepo/large.txt
  $ hg st -S
  M subrepo/large.txt
# update -C should revert the change.
  $ hg update -C
  getting changed largefiles
  1 largefiles updated, 0 removed
  getting changed largefiles
  0 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg status -S

Test archiving a revision that references a subrepo that is not yet
cloned (see test-subrepo-recursion.t):

  $ hg clone -U . ../empty
  $ cd ../empty
  $ hg archive --subrepos -r tip ../archive.tar.gz
  cloning subrepo subrepo from $TESTTMP/statusmatch/subrepo
  $ cd ..

Test that addremove picks up largefiles prior to the initial commit (issue3541)

  $ hg init addrm2
  $ cd addrm2
  $ touch large.dat
  $ touch large2.dat
  $ touch normal
  $ hg add --large large.dat
  $ hg addremove -v
  adding large2.dat as a largefile
  adding normal

Test that forgetting all largefiles reverts to islfilesrepo() == False
(addremove will add *.dat as normal files now)
  $ hg forget large.dat
  $ hg forget large2.dat
  $ hg addremove -v
  adding large.dat
  adding large2.dat

Test commit's addremove option prior to the first commit
  $ hg forget large.dat
  $ hg forget large2.dat
  $ hg add --large large.dat
  $ hg ci -Am "commit"
  adding large2.dat as a largefile
  Invoking status precommit hook
  A large.dat
  A large2.dat
  A normal
  $ find .hglf | sort
  .hglf
  .hglf/large.dat
  .hglf/large2.dat

Test actions on largefiles using relative paths from subdir

  $ mkdir sub
  $ cd sub
  $ echo anotherlarge > anotherlarge
  $ hg add --large anotherlarge
  $ hg st
  A sub/anotherlarge
  $ hg st anotherlarge
  A anotherlarge
  $ hg commit -m anotherlarge anotherlarge
  Invoking status precommit hook
  A sub/anotherlarge
  $ hg log anotherlarge
  changeset:   1:9627a577c5e9
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     anotherlarge
  
  $ echo more >> anotherlarge
  $ hg st .
  M anotherlarge
  $ hg cat anotherlarge
  anotherlarge
  $ hg revert anotherlarge
  $ hg st
  ? sub/anotherlarge.orig
  $ cd ..

  $ cd ..

issue3651: summary/outgoing with largefiles shows "no remote repo"
unexpectedly

  $ mkdir issue3651
  $ cd issue3651

  $ hg init src
  $ echo a > src/a
  $ hg -R src add --large src/a
  $ hg -R src commit -m '#0'
  Invoking status precommit hook
  A a

check messages when no remote repository is specified:
"no remote repo" route for "hg outgoing --large" is not tested here,
because it can't be reproduced easily.

  $ hg init clone1
  $ hg -R clone1 -q pull src
  $ hg -R clone1 -q update
  $ hg -R clone1 paths | grep default
  [1]

  $ hg -R clone1 summary --large
  parent: 0:fc0bd45326d3 tip
   #0
  branch: default
  commit: (clean)
  update: (current)
  largefiles: (no remote repo)

check messages when there is no files to upload:

  $ hg -q clone src clone2
  $ hg -R clone2 paths | grep default
  default = $TESTTMP/issue3651/src (glob)

  $ hg -R clone2 summary --large
  parent: 0:fc0bd45326d3 tip
   #0
  branch: default
  commit: (clean)
  update: (current)
  searching for changes
  largefiles: (no files to upload)
  $ hg -R clone2 outgoing --large
  comparing with $TESTTMP/issue3651/src (glob)
  searching for changes
  no changes found
  searching for changes
  largefiles: no files to upload
  [1]

check messages when there are files to upload:

  $ echo b > clone2/b
  $ hg -R clone2 add --large clone2/b
  $ hg -R clone2 commit -m '#1'
  Invoking status precommit hook
  A b
  $ hg -R clone2 summary --large
  parent: 1:1acbe71ce432 tip
   #1
  branch: default
  commit: (clean)
  update: (current)
  searching for changes
  largefiles: 1 to upload
  $ hg -R clone2 outgoing --large
  comparing with $TESTTMP/issue3651/src (glob)
  searching for changes
  changeset:   1:1acbe71ce432
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     #1
  
  searching for changes
  largefiles to upload:
  b
  

  $ cd ..