tests/test-mq-qpush-fail.t

largefiles: don't allow corruption to propagate after detection

basestore.get uses util.atomictempfile when checking and receiving a new
largefile ... but the close/discard logic was too clever for largefiles.
Largefiles relied on being able to discard the file and thus prevent it from
being written to the store. That was however too brittle. lfutil.copyandhash
closes the infile after writing to it ... with a 'blecch' comment. The discard
was thus a silent noop, and as a result of that corruption would be detected
... and then the corrupted files would be used anyway.

Instead we now use a tmp file and rename or unlink it after validating it.

A better solution should be implemented ... but not now.

Test that qpush cleans things up if it doesn't complete

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH
  $ hg init repo
  $ cd repo
  $ echo foo > foo
  $ hg ci -Am 'add foo'
  adding foo
  $ touch untracked-file
  $ echo 'syntax: glob' > .hgignore
  $ echo '.hgignore' >> .hgignore
  $ hg qinit

test qpush on empty series

  $ hg qpush
  no patches in series
  $ hg qnew patch1
  $ echo >> foo
  $ hg qrefresh -m 'patch 1'
  $ hg qnew patch2
  $ echo bar > bar
  $ hg add bar
  $ hg qrefresh -m 'patch 2'
  $ hg qnew --config 'mq.plain=true' bad-patch
  $ echo >> foo
  $ hg qrefresh
  $ hg qpop -a
  popping bad-patch
  popping patch2
  popping patch1
  patch queue now empty
  $ python -c 'print "\xe9"' > message
  $ cat .hg/patches/bad-patch >> message
  $ mv message .hg/patches/bad-patch
  $ hg qpush -a && echo 'qpush succeeded?!'
  applying patch1
  applying patch2
  applying bad-patch
  transaction abort!
  rollback completed
  cleaning up working directory...done
  abort: decoding near '\xe9': 'ascii' codec can't decode byte 0xe9 in position 0: ordinal not in range(128)! (esc)
  [255]
  $ hg parents
  changeset:   0:bbd179dfa0a7
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     add foo
  

test corrupt status file
  $ hg qpush
  applying patch1
  now at: patch1
  $ cp .hg/patches/status .hg/patches/status.orig
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cp .hg/patches/status.orig .hg/patches/status
  $ hg qpush
  abort: working directory revision is not qtip
  [255]
  $ rm .hg/patches/status .hg/patches/status.orig


bar should be gone; other unknown/ignored files should still be around

  $ hg status -A
  ? untracked-file
  I .hgignore
  C foo

preparing qpush of a missing patch

  $ hg qpop -a
  no patches applied
  $ hg qpush
  applying patch1
  now at: patch1
  $ rm .hg/patches/patch2

now we expect the push to fail, but it should NOT complain about patch1

  $ hg qpush
  applying patch2
  unable to read patch2
  now at: patch1
  [1]

preparing qpush of missing patch with no patch applied

  $ hg qpop -a
  popping patch1
  patch queue now empty
  $ rm .hg/patches/patch1

qpush should fail the same way as below

  $ hg qpush
  applying patch1
  unable to read patch1
  [1]

Test qpush to a patch below the currently applied patch.

  $ hg qq -c guardedseriesorder
  $ hg qnew a
  $ hg qguard +block
  $ hg qnew b
  $ hg qnew c

  $ hg qpop -a
  popping c
  popping b
  popping a
  patch queue now empty

try to push and pop while a is guarded

  $ hg qpush a
  cannot push 'a' - guarded by '+block'
  [1]
  $ hg qpush -a
  applying b
  patch b is empty
  applying c
  patch c is empty
  now at: c

now try it when a is unguarded, and we're at the top of the queue
  $ hg qsel block
  number of guarded, applied patches has changed from 1 to 0
  $ hg qpush b
  abort: cannot push to a previous patch: b
  [255]
  $ hg qpush a
  abort: cannot push to a previous patch: a
  [255]

and now we try it one more time with a unguarded, while we're not at the top of the queue

  $ hg qpop b
  popping c
  now at: b
  $ hg qpush a
  abort: cannot push to a previous patch: a
  [255]

test qpop --force and backup files

  $ hg qpop -a
  popping b
  patch queue now empty
  $ hg qq --create force
  $ echo a > a
  $ echo b > b
  $ echo c > c
  $ hg ci -Am add a b c
  $ echo a >> a
  $ hg rm b
  $ hg rm c
  $ hg qnew p1
  $ echo a >> a
  $ echo bb > b
  $ hg add b
  $ echo cc > c
  $ hg add c
  $ hg qpop --force --verbose
  saving current version of a as a.orig
  saving current version of b as b.orig
  saving current version of c as c.orig
  popping p1
  patch queue now empty
  $ hg st
  ? a.orig
  ? b.orig
  ? c.orig
  ? untracked-file
  $ cat a.orig
  a
  a
  a
  $ cat b.orig
  bb
  $ cat c.orig
  cc

test qpop --force --no-backup

  $ hg qpush
  applying p1
  now at: p1
  $ rm a.orig
  $ echo a >> a
  $ hg qpop --force --no-backup --verbose
  popping p1
  patch queue now empty
  $ test -f a.orig && echo 'error: backup with --no-backup'
  [1]

test qpop --keep-changes

  $ hg qpush
  applying p1
  now at: p1
  $ hg qpop --keep-changes --force
  abort: cannot use both --force and --keep-changes
  [255]
  $ echo a >> a
  $ hg qpop --keep-changes
  abort: local changes found, refresh first
  [255]
  $ hg revert -qa a
  $ rm a
  $ hg qpop --keep-changes
  abort: local changes found, refresh first
  [255]
  $ hg rm -A a
  $ hg qpop --keep-changes
  abort: local changes found, refresh first
  [255]
  $ hg revert -qa a
  $ echo b > b
  $ hg add b
  $ hg qpop --keep-changes
  abort: local changes found, refresh first
  [255]
  $ hg forget b
  $ echo d > d
  $ hg add d
  $ hg qpop --keep-changes
  popping p1
  patch queue now empty
  $ hg forget d
  $ rm d

test qpush --force and backup files

  $ echo a >> a
  $ hg qnew p2
  $ echo b >> b
  $ echo d > d
  $ echo e > e
  $ hg add d e
  $ hg rm c
  $ hg qnew p3
  $ hg qpop -a
  popping p3
  popping p2
  patch queue now empty
  $ echo a >> a
  $ echo b1 >> b
  $ echo d1 > d
  $ hg add d
  $ echo e1 > e
  $ hg qpush -a --force --verbose
  applying p2
  saving current version of a as a.orig
  patching file a
  a
  applying p3
  saving current version of b as b.orig
  saving current version of d as d.orig
  patching file b
  patching file c
  patching file d
  file d already exists
  1 out of 1 hunks FAILED -- saving rejects to file d.rej
  patching file e
  file e already exists
  1 out of 1 hunks FAILED -- saving rejects to file e.rej
  patch failed to apply
  b
  patch failed, rejects left in working dir
  errors during apply, please fix and refresh p3
  [2]
  $ cat a.orig
  a
  a
  $ cat b.orig
  b
  b1
  $ cat d.orig
  d1

test qpush --force --no-backup

  $ hg revert -qa
  $ hg qpop -a
  popping p3
  popping p2
  patch queue now empty
  $ echo a >> a
  $ rm a.orig
  $ hg qpush --force --no-backup --verbose
  applying p2
  patching file a
  a
  now at: p2
  $ test -f a.orig && echo 'error: backup with --no-backup'
  [1]

test qgoto --force --no-backup

  $ hg qpop
  popping p2
  patch queue now empty
  $ echo a >> a
  $ hg qgoto --force --no-backup p2 --verbose
  applying p2
  patching file a
  a
  now at: p2
  $ test -f a.orig && echo 'error: backup with --no-backup'
  [1]

test qpush --keep-changes

  $ hg qpush --keep-changes --force
  abort: cannot use both --force and --keep-changes
  [255]
  $ hg qpush --keep-changes --exact
  abort: cannot use --exact and --keep-changes together
  [255]
  $ echo b >> b
  $ hg qpush --keep-changes
  applying p3
  errors during apply, please fix and refresh p2
  [2]
  $ rm b
  $ hg qpush --keep-changes
  applying p3
  errors during apply, please fix and refresh p2
  [2]
  $ hg rm -A b
  $ hg qpush --keep-changes
  applying p3
  errors during apply, please fix and refresh p2
  [2]
  $ hg revert -aq b
  $ echo d > d
  $ hg add d
  $ hg qpush --keep-changes
  applying p3
  errors during apply, please fix and refresh p2
  [2]
  $ hg forget d
  $ rm d
  $ hg qpop
  popping p2
  patch queue now empty
  $ echo b >> b
  $ hg qpush -a --keep-changes
  applying p2
  applying p3
  errors during apply, please fix and refresh p2
  [2]
  $ hg qtop
  p2
  $ hg parents --template "{rev} {desc}\n"
  2 imported patch p2
  $ hg st b
  M b
  $ cat b
  b
  b

test qgoto --keep-changes

  $ hg revert -aq b
  $ rm e
  $ hg qgoto --keep-changes --force p3
  abort: cannot use both --force and --keep-changes
  [255]
  $ echo a >> a
  $ hg qgoto --keep-changes p3
  applying p3
  now at: p3
  $ hg st a
  M a
  $ hg qgoto --keep-changes p2
  popping p3
  now at: p2
  $ hg st a
  M a

test mq.keepchanges setting

  $ hg --config mq.keepchanges=1 qpush
  applying p3
  now at: p3
  $ hg st a
  M a
  $ hg --config mq.keepchanges=1 qpop
  popping p3
  now at: p2
  $ hg st a
  M a
  $ hg --config mq.keepchanges=1 qgoto p3
  applying p3
  now at: p3
  $ hg st a
  M a
  $ echo b >> b
  $ hg --config mq.keepchanges=1 qpop --force
  popping p3
  now at: p2
  $ hg st b
  $ hg --config mq.keepchanges=1 qpush --exact
  abort: local changes found, refresh first
  [255]
  $ hg revert -qa a
  $ hg qpop
  popping p2
  patch queue now empty
  $ echo a >> a
  $ hg --config mq.keepchanges=1 qpush --force
  applying p2
  now at: p2
  $ hg st a

  $ cd ..