annotate hgext/largefiles/uisetup.py @ 17878:d1d0140287b8 stable

largefiles: don't copy largefiles from working dir to the store while converting

Previously, if one or more largefiles for a repo being converted were not in the
usercache, the convert would abort with a reference to the largefile being
missing (as opposed to the previous patch, where the standin was referenced as
missing).  This is because commitctx() tries to copy all largefiles to the
local store, first from the user cache, and if the file isn't found there, from
the working directory.  No files will exist in the working directory during a
convert, however.  It is not sufficient to force the source repo to be local
before proceeding, because clone and pull do not download largefiles by default.

This is slightly less than ideal because while the conversion will now complete,
it won't be possible to update to revs with missing largefiles unless the user
intervenes manually, because there is no default path pointing back to the
source repo.  Ideally these files would be cached during the conversion.

This check could have been done in reposetup.commitctx() instead, but this
ensures the local store directory is created, which is necessary to enable the
standin matcher.

The rm -> 'rm -f' change in the test is to temporarily suppress an error
clearing the cache- as noted, the cache is is not repopulated during convert.
When that is fixed, this can be changed back and the verification errors will
disappear too.

# Copyright 2009-2010 Gregory P. Ward
# Copyright 2009-2010 Intelerad Medical Systems Incorporated
# Copyright 2010-2011 Fog Creek Software
# Copyright 2010-2011 Unity Technologies
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''setup for largefiles extension: uisetup'''

from mercurial import archival, cmdutil, commands, extensions, filemerge, hg, \
    httppeer, localrepo, merge, scmutil, sshpeer, sshserver, wireproto
from mercurial.i18n import _
from mercurial.hgweb import hgweb_mod, protocol, webcommands
from mercurial.subrepo import hgsubrepo

import overrides
import proto

def uisetup(ui):
    # Disable auto-status for some commands which assume that all
    # files in the result are under Mercurial's control

    entry = extensions.wrapcommand(commands.table, 'add',
                                   overrides.overrideadd)
    addopt = [('', 'large', None, _('add as largefile')),
              ('', 'normal', None, _('add as normal file')),
              ('', 'lfsize', '', _('add all files above this size '
                                   '(in megabytes) as largefiles '
                                   '(default: 10)'))]
    entry[1].extend(addopt)

    # The scmutil function is called both by the (trivial) addremove command,
    # and in the process of handling commit -A (issue3542)
    entry = extensions.wrapfunction(scmutil, 'addremove',
                                    overrides.scmutiladdremove)
    entry = extensions.wrapcommand(commands.table, 'remove',
                                   overrides.overrideremove)
    entry = extensions.wrapcommand(commands.table, 'forget',
                                   overrides.overrideforget)

    # Subrepos call status function
    entry = extensions.wrapcommand(commands.table, 'status',
                                   overrides.overridestatus)
    entry = extensions.wrapfunction(hgsubrepo, 'status',
                                    overrides.overridestatusfn)

    entry = extensions.wrapcommand(commands.table, 'log',
                                   overrides.overridelog)
    entry = extensions.wrapcommand(commands.table, 'rollback',
                                   overrides.overriderollback)
    entry = extensions.wrapcommand(commands.table, 'verify',
                                   overrides.overrideverify)

    verifyopt = [('', 'large', None, _('verify largefiles')),
                 ('', 'lfa', None,
                     _('verify all revisions of largefiles not just current')),
                 ('', 'lfc', None,
                     _('verify largefile contents not just existence'))]
    entry[1].extend(verifyopt)

    entry = extensions.wrapcommand(commands.table, 'outgoing',
        overrides.overrideoutgoing)
    outgoingopt = [('', 'large', None, _('display outgoing largefiles'))]
    entry[1].extend(outgoingopt)
    entry = extensions.wrapcommand(commands.table, 'summary',
                                   overrides.overridesummary)
    summaryopt = [('', 'large', None, _('display outgoing largefiles'))]
    entry[1].extend(summaryopt)

    entry = extensions.wrapcommand(commands.table, 'update',
                                   overrides.overrideupdate)
    entry = extensions.wrapcommand(commands.table, 'pull',
                                   overrides.overridepull)
    pullopt = [('', 'all-largefiles', None,
                 _('download all pulled versions of largefiles'))]
    entry[1].extend(pullopt)
    entry = extensions.wrapcommand(commands.table, 'clone',
                                   overrides.overrideclone)
    cloneopt = [('', 'all-largefiles', None,
                 _('download all versions of all largefiles'))]
    entry[1].extend(cloneopt)
    entry = extensions.wrapfunction(hg, 'clone', overrides.hgclone)

    entry = extensions.wrapcommand(commands.table, 'cat',
                                   overrides.overridecat)
    entry = extensions.wrapfunction(merge, '_checkunknownfile',
                                    overrides.overridecheckunknownfile)
    entry = extensions.wrapfunction(merge, 'manifestmerge',
                                    overrides.overridemanifestmerge)
    entry = extensions.wrapfunction(filemerge, 'filemerge',
                                    overrides.overridefilemerge)
    entry = extensions.wrapfunction(cmdutil, 'copy',
                                    overrides.overridecopy)

    # Summary calls dirty on the subrepos
    entry = extensions.wrapfunction(hgsubrepo, 'dirty',
                                    overrides.overridedirty)

    # Backout calls revert so we need to override both the command and the
    # function
    entry = extensions.wrapcommand(commands.table, 'revert',
                                   overrides.overriderevert)
    entry = extensions.wrapfunction(commands, 'revert',
                                    overrides.overriderevert)

    # clone uses hg._update instead of hg.update even though they are the
    # same function... so wrap both of them)
    extensions.wrapfunction(hg, 'update', overrides.hgupdate)
    extensions.wrapfunction(hg, '_update', overrides.hgupdate)
    extensions.wrapfunction(hg, 'clean', overrides.hgclean)
    extensions.wrapfunction(hg, 'merge', overrides.hgmerge)

    extensions.wrapfunction(archival, 'archive', overrides.overridearchive)
    extensions.wrapfunction(hgsubrepo, 'archive', overrides.hgsubrepoarchive)
    extensions.wrapfunction(cmdutil, 'bailifchanged',
                            overrides.overridebailifchanged)

    # create the new wireproto commands ...
    wireproto.commands['putlfile'] = (proto.putlfile, 'sha')
    wireproto.commands['getlfile'] = (proto.getlfile, 'sha')
    wireproto.commands['statlfile'] = (proto.statlfile, 'sha')

    # ... and wrap some existing ones
    wireproto.commands['capabilities'] = (proto.capabilities, '')
    wireproto.commands['heads'] = (proto.heads, '')
    wireproto.commands['lheads'] = (wireproto.heads, '')

    # make putlfile behave the same as push and {get,stat}lfile behave
    # the same as pull w.r.t. permissions checks
    hgweb_mod.perms['putlfile'] = 'push'
    hgweb_mod.perms['getlfile'] = 'pull'
    hgweb_mod.perms['statlfile'] = 'pull'

    extensions.wrapfunction(webcommands, 'decodepath', overrides.decodepath)

    # the hello wireproto command uses wireproto.capabilities, so it won't see
    # our largefiles capability unless we replace the actual function as well.
    proto.capabilitiesorig = wireproto.capabilities
    wireproto.capabilities = proto.capabilities

    # these let us reject non-largefiles clients and make them display
    # our error messages
    protocol.webproto.refuseclient = proto.webprotorefuseclient
    sshserver.sshserver.refuseclient = proto.sshprotorefuseclient

    # can't do this in reposetup because it needs to have happened before
    # wirerepo.__init__ is called
    proto.ssholdcallstream = sshpeer.sshpeer._callstream
    proto.httpoldcallstream = httppeer.httppeer._callstream
    sshpeer.sshpeer._callstream = proto.sshrepocallstream
    httppeer.httppeer._callstream = proto.httprepocallstream

    # don't die on seeing a repo with the largefiles requirement
    localrepo.localrepository.supported |= set(['largefiles'])

    # override some extensions' stuff as well
    for name, module in extensions.extensions():
        if name == 'fetch':
            extensions.wrapcommand(getattr(module, 'cmdtable'), 'fetch',
                overrides.overridefetch)
        if name == 'purge':
            extensions.wrapcommand(getattr(module, 'cmdtable'), 'purge',
                overrides.overridepurge)
        if name == 'rebase':
            extensions.wrapcommand(getattr(module, 'cmdtable'), 'rebase',
                overrides.overriderebase)
        if name == 'transplant':
            extensions.wrapcommand(getattr(module, 'cmdtable'), 'transplant',
                overrides.overridetransplant)
        if name == 'convert':
            convcmd = getattr(module, 'convcmd')
            hgsink = getattr(convcmd, 'mercurial_sink')
            extensions.wrapfunction(hgsink, 'before',
                                    overrides.mercurialsinkbefore)
            extensions.wrapfunction(hgsink, 'after',
                                    overrides.mercurialsinkafter)