hgext/churn.py

largefiles: access to specific fields only if largefiles enabled (issue4547)

Even if largefiles extension is enabled in a repository, "repo"
object, which isn't "largefiles.reposetup()"-ed, is passed to
overridden functions in the cases below unexpectedly, because
extensions are enabled for each repositories strictly.

  (1) clone without -U:
  (2) pull with -U:
  (3) pull with --rebase:

    combination of "enabled@src", "disabled@dst" and
    "not-required@src" cause this situation.

       largefiles     requirement
    @src     @dst     @src            result
    -------- -------- --------------- --------------------
    enabled  disabled not-required    aborted unexpectedly
                      required        requirement error (intentional)
    -------- -------- --------------- --------------------
    enabled  enabled  *               success
    -------- -------- --------------- --------------------
    disabled enabled  *               success (only for "pull")
    -------- -------- --------------- --------------------
    disabled disabled not-required    success
                      required        requirement error (intentional)
    -------- -------- --------------- --------------------

  (4) update/revert with a subrepo disabling largefiles

In these cases, overridden functions cause accessing to largefiles
specific fields of not "largefiles.reposetup()"-ed "repo" object, and
execution is aborted.

  - (1), (2), (4) cause accessing to "_lfstatuswriters" in
    "getstatuswriter()" invoked via "updatelfiles()"

  - (3) causes accessing to "_lfcommithooks" in "overriderebase()"

For safe accessing to these fields, this patch examines whether passed
"repo" object is "largefiles.reposetup()"-ed or not before accessing
to them.

This patch chooses examining existence of newly introduced
"_largefilesenabled" instead of "_lfcommithooks" and
"_lfstatuswriters" directly, because the former is better name for the
generic "largefiles is enabled in this repo" mark than the latter.

In the future, all other overridden functions should avoid largefiles
specific processing for efficiency, and "_largefilesenabled" is better
also for such purpose.

BTW, "lfstatus" can't be used for such purpose, because some code
paths set it forcibly regardless of existence of it in specified
"repo" object.

# churn.py - create a graph of revisions count grouped by template
#
# Copyright 2006 Josef "Jeff" Sipek <[e-mail]>
# Copyright 2008 Alexander Solovyov <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''command to display statistics about repository history'''

from mercurial.i18n import _
from mercurial import patch, cmdutil, scmutil, util, templater, commands
from mercurial import encoding
import os
import time, datetime

cmdtable = {}
command = cmdutil.command(cmdtable)
testedwith = 'internal'

def maketemplater(ui, repo, tmpl):
    tmpl = templater.parsestring(tmpl, quoted=False)
    try:
        t = cmdutil.changeset_templater(ui, repo, False, None, tmpl,
                                        None, False)
    except SyntaxError, inst:
        raise util.Abort(inst.args[0])
    return t

def changedlines(ui, repo, ctx1, ctx2, fns):
    added, removed = 0, 0
    fmatch = scmutil.matchfiles(repo, fns)
    diff = ''.join(patch.diff(repo, ctx1.node(), ctx2.node(), fmatch))
    for l in diff.split('\n'):
        if l.startswith("+") and not l.startswith("+++ "):
            added += 1
        elif l.startswith("-") and not l.startswith("--- "):
            removed += 1
    return (added, removed)

def countrate(ui, repo, amap, *pats, **opts):
    """Calculate stats"""
    if opts.get('dateformat'):
        def getkey(ctx):
            t, tz = ctx.date()
            date = datetime.datetime(*time.gmtime(float(t) - tz)[:6])
            return date.strftime(opts['dateformat'])
    else:
        tmpl = opts.get('template', '{author|email}')
        tmpl = maketemplater(ui, repo, tmpl)
        def getkey(ctx):
            ui.pushbuffer()
            tmpl.show(ctx)
            return ui.popbuffer()

    state = {'count': 0}
    rate = {}
    df = False
    if opts.get('date'):
        df = util.matchdate(opts['date'])

    m = scmutil.match(repo[None], pats, opts)
    def prep(ctx, fns):
        rev = ctx.rev()
        if df and not df(ctx.date()[0]): # doesn't match date format
            return

        key = getkey(ctx).strip()
        key = amap.get(key, key) # alias remap
        if opts.get('changesets'):
            rate[key] = (rate.get(key, (0,))[0] + 1, 0)
        else:
            parents = ctx.parents()
            if len(parents) > 1:
                ui.note(_('revision %d is a merge, ignoring...\n') % (rev,))
                return

            ctx1 = parents[0]
            lines = changedlines(ui, repo, ctx1, ctx, fns)
            rate[key] = [r + l for r, l in zip(rate.get(key, (0, 0)), lines)]

        state['count'] += 1
        ui.progress(_('analyzing'), state['count'], total=len(repo))

    for ctx in cmdutil.walkchangerevs(repo, m, opts, prep):
        continue

    ui.progress(_('analyzing'), None)

    return rate


@command('churn',
    [('r', 'rev', [],
     _('count rate for the specified revision or revset'), _('REV')),
    ('d', 'date', '',
     _('count rate for revisions matching date spec'), _('DATE')),
    ('t', 'template', '{author|email}',
     _('template to group changesets'), _('TEMPLATE')),
    ('f', 'dateformat', '',
     _('strftime-compatible format for grouping by date'), _('FORMAT')),
    ('c', 'changesets', False, _('count rate by number of changesets')),
    ('s', 'sort', False, _('sort by key (default: sort by count)')),
    ('', 'diffstat', False, _('display added/removed lines separately')),
    ('', 'aliases', '', _('file with email aliases'), _('FILE')),
    ] + commands.walkopts,
    _("hg churn [-d DATE] [-r REV] [--aliases FILE] [FILE]"),
    inferrepo=True)
def churn(ui, repo, *pats, **opts):
    '''histogram of changes to the repository

    This command will display a histogram representing the number
    of changed lines or revisions, grouped according to the given
    template. The default template will group changes by author.
    The --dateformat option may be used to group the results by
    date instead.

    Statistics are based on the number of changed lines, or
    alternatively the number of matching revisions if the
    --changesets option is specified.

    Examples::

      # display count of changed lines for every committer
      hg churn -t "{author|email}"

      # display daily activity graph
      hg churn -f "%H" -s -c

      # display activity of developers by month
      hg churn -f "%Y-%m" -s -c

      # display count of lines changed in every year
      hg churn -f "%Y" -s

    It is possible to map alternate email addresses to a main address
    by providing a file using the following format::

      <alias email> = <actual email>

    Such a file may be specified with the --aliases option, otherwise
    a .hgchurn file will be looked for in the working directory root.
    Aliases will be split from the rightmost "=".
    '''
    def pad(s, l):
        return s + " " * (l - encoding.colwidth(s))

    amap = {}
    aliases = opts.get('aliases')
    if not aliases and os.path.exists(repo.wjoin('.hgchurn')):
        aliases = repo.wjoin('.hgchurn')
    if aliases:
        for l in open(aliases, "r"):
            try:
                alias, actual = l.rsplit('=' in l and '=' or None, 1)
                amap[alias.strip()] = actual.strip()
            except ValueError:
                l = l.strip()
                if l:
                    ui.warn(_("skipping malformed alias: %s\n") % l)
                continue

    rate = countrate(ui, repo, amap, *pats, **opts).items()
    if not rate:
        return

    if opts.get('sort'):
        rate.sort()
    else:
        rate.sort(key=lambda x: (-sum(x[1]), x))

    # Be careful not to have a zero maxcount (issue833)
    maxcount = float(max(sum(v) for k, v in rate)) or 1.0
    maxname = max(len(k) for k, v in rate)

    ttywidth = ui.termwidth()
    ui.debug("assuming %i character terminal\n" % ttywidth)
    width = ttywidth - maxname - 2 - 2 - 2

    if opts.get('diffstat'):
        width -= 15
        def format(name, diffstat):
            added, removed = diffstat
            return "%s %15s %s%s\n" % (pad(name, maxname),
                                       '+%d/-%d' % (added, removed),
                                       ui.label('+' * charnum(added),
                                                'diffstat.inserted'),
                                       ui.label('-' * charnum(removed),
                                                'diffstat.deleted'))
    else:
        width -= 6
        def format(name, count):
            return "%s %6d %s\n" % (pad(name, maxname), sum(count),
                                    '*' * charnum(sum(count)))

    def charnum(count):
        return int(round(count * width / maxcount))

    for name, count in rate:
        ui.write(format(name, count))