tests/test-run-tests.t

perf: replace ui.configint() by getint() for Mercurial earlier than 1.9

Before this patch, using ui.configint() prevents perf.py from
measuring performance with Mercurial earlier than 1.9 (or
fa2b596db182), because ui.configint() isn't available in such
Mercurial, even though there are some code paths for Mercurial earlier
than 1.9 in perf.py.

For example, setting "_prereadsize" attribute in perfindex() and
perfnodelookup() is effective only with hg earlier than 1.8 (or
61c9bc3da402).

This patch replaces ui.configint() invocations by newly introduced
getint().

This patch also adds check-perf-code.py an extra check entry to detect
direct usage of ui.configint() in perf.py.

BTW, this patch doesn't choose adding configint() method at runtime by
replacing ui.__class__ like below, even though this is the recommended
way to modern Mercurial extensions.

    def uisetup(ui):
        if not util.safehasattr(ui, 'configint'):
            class uiwrap(ui.__class__):
                def configint(self, section, name, ....):
                    ....
            ui.__class__ = uiwrap

Because changes to ui.__class__ by uisetup() of loaded extension have
been propagated since 1.6.1 (or d8d0fc3988ca), the recommended way
above doesn't work as expected with Mercurial earlier than it.

This file tests the behavior of run-tests.py itself.

Avoid interference from actual test env:

  $ . "$TESTDIR/helper-runtests.sh"

Smoke test with install
============

  $ run-tests.py $HGTEST_RUN_TESTS_PURE -l
  
  # Ran 0 tests, 0 skipped, 0 warned, 0 failed.

Define a helper to avoid the install step
=============
  $ rt()
  > {
  >     run-tests.py --with-hg=`which hg` "$@"
  > }

error paths

#if symlink
  $ ln -s `which true` hg
  $ run-tests.py --with-hg=./hg
  warning: --with-hg should specify an hg script
  
  # Ran 0 tests, 0 skipped, 0 warned, 0 failed.
  $ rm hg
#endif

#if execbit
  $ touch hg
  $ run-tests.py --with-hg=./hg
  Usage: run-tests.py [options] [tests]
  
  run-tests.py: error: --with-hg must specify an executable hg script
  [2]
  $ rm hg
#endif

an empty test
=======================

  $ touch test-empty.t
  $ rt
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.
  $ rm test-empty.t

a succesful test
=======================

  $ cat > test-success.t << EOF
  >   $ echo babar
  >   babar
  >   $ echo xyzzy
  >   never*happens (glob) (?)
  >   xyzzy
  >   nor this (?)
  >   $ printf 'abc\ndef\nxyz\n'
  >   123 (?)
  >   abc
  >   def (?)
  >   456 (?)
  >   xyz
  > EOF

  $ rt
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

failing test
==================

test churn with globs
  $ cat > test-failure.t <<EOF
  >   $ echo "bar-baz"; echo "bar-bad"
  >   bar*bad (glob)
  >   bar*baz (glob)
  > EOF
  $ rt test-failure.t
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,3 +1,3 @@
     $ echo "bar-baz"; echo "bar-bad"
  +  bar*baz (glob)
     bar*bad (glob)
  -  bar*baz (glob)
  
  ERROR: test-failure.t output changed
  !
  Failed test-failure.t: output changed
  # Ran 1 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

basic failing test
  $ cat > test-failure.t << EOF
  >   $ echo babar
  >   rataxes
  > This is a noop statement so that
  > this test is still more bytes than success.
  > pad pad pad pad............................................................
  > pad pad pad pad............................................................
  > EOF

  >>> fh = open('test-failure-unicode.t', 'wb')
  >>> fh.write(u'  $ echo babar\u03b1\n'.encode('utf-8')) and None
  >>> fh.write(u'  l\u03b5\u03b5t\n'.encode('utf-8')) and None

  $ rt
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  ERROR: test-failure.t output changed
  !.
  --- $TESTTMP/test-failure-unicode.t
  +++ $TESTTMP/test-failure-unicode.t.err
  @@ -1,2 +1,2 @@
     $ echo babar\xce\xb1 (esc)
  -  l\xce\xb5\xce\xb5t (esc)
  +  babar\xce\xb1 (esc)
  
  ERROR: test-failure-unicode.t output changed
  !
  Failed test-failure.t: output changed
  Failed test-failure-unicode.t: output changed
  # Ran 3 tests, 0 skipped, 0 warned, 2 failed.
  python hash seed: * (glob)
  [1]

test --xunit support
  $ rt --xunit=xunit.xml
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  ERROR: test-failure.t output changed
  !.
  --- $TESTTMP/test-failure-unicode.t
  +++ $TESTTMP/test-failure-unicode.t.err
  @@ -1,2 +1,2 @@
     $ echo babar\xce\xb1 (esc)
  -  l\xce\xb5\xce\xb5t (esc)
  +  babar\xce\xb1 (esc)
  
  ERROR: test-failure-unicode.t output changed
  !
  Failed test-failure.t: output changed
  Failed test-failure-unicode.t: output changed
  # Ran 3 tests, 0 skipped, 0 warned, 2 failed.
  python hash seed: * (glob)
  [1]
  $ cat xunit.xml
  <?xml version="1.0" encoding="utf-8"?>
  <testsuite errors="0" failures="2" name="run-tests" skipped="0" tests="3">
    <testcase name="test-success.t" time="*"/> (glob)
    <testcase name="test-failure-unicode.t" time="*"> (glob)
  <![CDATA[--- $TESTTMP/test-failure-unicode.t
  +++ $TESTTMP/test-failure-unicode.t.err
  @@ -1,2 +1,2 @@
     $ echo babar\xce\xb1 (esc)
  -  l\xce\xb5\xce\xb5t (esc)
  +  babar\xce\xb1 (esc)
  ]]>  </testcase>
    <testcase name="test-failure.t" time="*"> (glob)
  <![CDATA[--- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  ]]>  </testcase>
  </testsuite>

  $ cat .testtimes
  test-failure-unicode.t * (glob)
  test-failure.t * (glob)
  test-success.t * (glob)
  $ rm test-failure-unicode.t

test for --retest
====================

  $ rt --retest
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  ERROR: test-failure.t output changed
  !
  Failed test-failure.t: output changed
  # Ran 2 tests, 1 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

Selecting Tests To Run
======================

successful

  $ rt test-success.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

success w/ keyword
  $ rt -k xyzzy
  .
  # Ran 2 tests, 1 skipped, 0 warned, 0 failed.

failed

  $ rt test-failure.t
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  ERROR: test-failure.t output changed
  !
  Failed test-failure.t: output changed
  # Ran 1 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

failure w/ keyword
  $ rt -k rataxes
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  ERROR: test-failure.t output changed
  !
  Failed test-failure.t: output changed
  # Ran 2 tests, 1 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

Verify that when a process fails to start we show a useful message
==================================================================

  $ cat > test-serve-fail.t <<EOF
  >   $ echo 'abort: child process failed to start blah'
  > EOF
  $ rt test-serve-fail.t
  
  ERROR: test-serve-fail.t output changed
  !
  Failed test-serve-fail.t: server failed to start (HGPORT=*) (glob)
  # Ran 1 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]
  $ rm test-serve-fail.t

Verify that we can try other ports
===================================
  $ hg init inuse
  $ hg serve -R inuse -p $HGPORT -d --pid-file=blocks.pid
  $ cat blocks.pid >> $DAEMON_PIDS
  $ cat > test-serve-inuse.t <<EOF
  >   $ hg serve -R `pwd`/inuse -p \$HGPORT -d --pid-file=hg.pid
  >   $ cat hg.pid >> \$DAEMON_PIDS
  > EOF
  $ rt test-serve-inuse.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.
  $ rm test-serve-inuse.t
  $ killdaemons.py $DAEMON_PIDS
  $ rm $DAEMON_PIDS

Running In Debug Mode
======================

  $ rt --debug 2>&1 | grep -v pwd
  + echo *SALT* 0 0 (glob)
  *SALT* 0 0 (glob)
  + echo babar
  babar
  + echo *SALT* 6 0 (glob)
  *SALT* 6 0 (glob)
  *+ echo *SALT* 0 0 (glob)
  *SALT* 0 0 (glob)
  + echo babar
  babar
  + echo *SALT* 2 0 (glob)
  *SALT* 2 0 (glob)
  + echo xyzzy
  xyzzy
  + echo *SALT* 6 0 (glob)
  *SALT* 6 0 (glob)
  + printf *abc\ndef\nxyz\n* (glob)
  abc
  def
  xyz
  + echo *SALT* 12 0 (glob)
  *SALT* 12 0 (glob)
  .
  # Ran 2 tests, 0 skipped, 0 warned, 0 failed.

Parallel runs
==============

(duplicate the failing test to get predictable output)
  $ cp test-failure.t test-failure-copy.t

  $ rt --jobs 2 test-failure*.t -n
  !!
  Failed test-failure*.t: output changed (glob)
  Failed test-failure*.t: output changed (glob)
  # Ran 2 tests, 0 skipped, 0 warned, 2 failed.
  python hash seed: * (glob)
  [1]

failures in parallel with --first should only print one failure
  >>> f = open('test-nothing.t', 'w')
  >>> f.write('foo\n' * 1024) and None
  >>> f.write('  $ sleep 1') and None
  $ rt --jobs 2 --first
  
  --- $TESTTMP/test-failure*.t (glob)
  +++ $TESTTMP/test-failure*.t.err (glob)
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  Failed test-failure*.t: output changed (glob)
  Failed test-nothing.t: output changed
  # Ran 2 tests, 0 skipped, 0 warned, 2 failed.
  python hash seed: * (glob)
  [1]


(delete the duplicated test file)
  $ rm test-failure-copy.t test-nothing.t


Interactive run
===============

(backup the failing test)
  $ cp test-failure.t backup

Refuse the fix

  $ echo 'n' | rt -i
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  Accept this change? [n] 
  ERROR: test-failure.t output changed
  !.
  Failed test-failure.t: output changed
  # Ran 2 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

  $ cat test-failure.t
    $ echo babar
    rataxes
  This is a noop statement so that
  this test is still more bytes than success.
  pad pad pad pad............................................................
  pad pad pad pad............................................................

Interactive with custom view

  $ echo 'n' | rt -i --view echo
  $TESTTMP/test-failure.t $TESTTMP/test-failure.t.err (glob)
  Accept this change? [n]* (glob)
  ERROR: test-failure.t output changed
  !.
  Failed test-failure.t: output changed
  # Ran 2 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

View the fix

  $ echo 'y' | rt --view echo
  $TESTTMP/test-failure.t $TESTTMP/test-failure.t.err (glob)
  
  ERROR: test-failure.t output changed
  !.
  Failed test-failure.t: output changed
  # Ran 2 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

Accept the fix

  $ echo "  $ echo 'saved backup bundle to \$TESTTMP/foo.hg'" >> test-failure.t
  $ echo "  saved backup bundle to \$TESTTMP/foo.hg" >> test-failure.t
  $ echo "  $ echo 'saved backup bundle to \$TESTTMP/foo.hg'" >> test-failure.t
  $ echo "  saved backup bundle to \$TESTTMP/foo.hg (glob)" >> test-failure.t
  $ echo "  $ echo 'saved backup bundle to \$TESTTMP/foo.hg'" >> test-failure.t
  $ echo "  saved backup bundle to \$TESTTMP/*.hg (glob)" >> test-failure.t
  $ echo 'y' | rt -i 2>&1
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,11 +1,11 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
   pad pad pad pad............................................................
     $ echo 'saved backup bundle to $TESTTMP/foo.hg'
  -  saved backup bundle to $TESTTMP/foo.hg
  +  saved backup bundle to $TESTTMP/foo.hg* (glob)
     $ echo 'saved backup bundle to $TESTTMP/foo.hg'
     saved backup bundle to $TESTTMP/foo.hg* (glob)
     $ echo 'saved backup bundle to $TESTTMP/foo.hg'
  Accept this change? [n] ..
  # Ran 2 tests, 0 skipped, 0 warned, 0 failed.

  $ sed -e 's,(glob)$,&<,g' test-failure.t
    $ echo babar
    babar
  This is a noop statement so that
  this test is still more bytes than success.
  pad pad pad pad............................................................
  pad pad pad pad............................................................
    $ echo 'saved backup bundle to $TESTTMP/foo.hg'
    saved backup bundle to $TESTTMP/foo.hg (glob)<
    $ echo 'saved backup bundle to $TESTTMP/foo.hg'
    saved backup bundle to $TESTTMP/foo.hg (glob)<
    $ echo 'saved backup bundle to $TESTTMP/foo.hg'
    saved backup bundle to $TESTTMP/*.hg (glob)<

(reinstall)
  $ mv backup test-failure.t

No Diff
===============

  $ rt --nodiff
  !.
  Failed test-failure.t: output changed
  # Ran 2 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

test --tmpdir support
  $ rt --tmpdir=$TESTTMP/keep test-success.t
  
  Keeping testtmp dir: $TESTTMP/keep/child1/test-success.t (glob)
  Keeping threadtmp dir: $TESTTMP/keep/child1  (glob)
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

timeouts
========
  $ cat > test-timeout.t <<EOF
  >   $ sleep 2
  >   $ echo pass
  >   pass
  > EOF
  > echo '#require slow' > test-slow-timeout.t
  > cat test-timeout.t >> test-slow-timeout.t
  $ rt --timeout=1 --slowtimeout=3 test-timeout.t test-slow-timeout.t
  st
  Skipped test-slow-timeout.t: missing feature: allow slow tests
  Failed test-timeout.t: timed out
  # Ran 1 tests, 1 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]
  $ rt --timeout=1 --slowtimeout=3 \
  > test-timeout.t test-slow-timeout.t --allow-slow-tests
  .t
  Failed test-timeout.t: timed out
  # Ran 2 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]
  $ rm test-timeout.t test-slow-timeout.t

test for --time
==================

  $ rt test-success.t --time
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.
  # Producing time report
  start   end     cuser   csys    real      Test
  \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   test-success.t (re)

test for --time with --job enabled
====================================

  $ rt test-success.t --time --jobs 2
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.
  # Producing time report
  start   end     cuser   csys    real      Test
  \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   test-success.t (re)

Skips
================
  $ cat > test-skip.t <<EOF
  >   $ echo xyzzy
  > #require false
  > EOF
  $ rt --nodiff
  !.s
  Skipped test-skip.t: missing feature: nail clipper
  Failed test-failure.t: output changed
  # Ran 2 tests, 1 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

  $ rt --keyword xyzzy
  .s
  Skipped test-skip.t: missing feature: nail clipper
  # Ran 2 tests, 2 skipped, 0 warned, 0 failed.

Skips with xml
  $ rt --keyword xyzzy \
  >  --xunit=xunit.xml
  .s
  Skipped test-skip.t: missing feature: nail clipper
  # Ran 2 tests, 2 skipped, 0 warned, 0 failed.
  $ cat xunit.xml
  <?xml version="1.0" encoding="utf-8"?>
  <testsuite errors="0" failures="0" name="run-tests" skipped="2" tests="2">
    <testcase name="test-success.t" time="*"/> (glob)
  </testsuite>

Missing skips or blacklisted skips don't count as executed:
  $ echo test-failure.t > blacklist
  $ rt --blacklist=blacklist --json\
  >   test-failure.t test-bogus.t
  ss
  Skipped test-bogus.t: Doesn't exist
  Skipped test-failure.t: blacklisted
  # Ran 0 tests, 2 skipped, 0 warned, 0 failed.
  $ cat report.json
  testreport ={
      "test-bogus.t": {
          "result": "skip"
      },
      "test-failure.t": {
          "result": "skip"
      }
  } (no-eol)

Whitelist trumps blacklist
  $ echo test-failure.t > whitelist
  $ rt --blacklist=blacklist --whitelist=whitelist --json\
  >   test-failure.t test-bogus.t
  s
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  ERROR: test-failure.t output changed
  !
  Skipped test-bogus.t: Doesn't exist
  Failed test-failure.t: output changed
  # Ran 1 tests, 1 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

test for --json
==================

  $ rt --json
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  ERROR: test-failure.t output changed
  !.s
  Skipped test-skip.t: missing feature: nail clipper
  Failed test-failure.t: output changed
  # Ran 2 tests, 1 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

  $ cat report.json
  testreport ={
      "test-failure.t": [\{] (re)
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "diff": "---.+\+\+\+.+", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "failure", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }, ? (re)
      "test-skip.t": {
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "diff": "", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "skip", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }, ? (re)
      "test-success.t": [\{] (re)
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "diff": "", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "success", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }
  } (no-eol)

Test that failed test accepted through interactive are properly reported:

  $ cp test-failure.t backup
  $ echo y | rt --json -i
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  Accept this change? [n] ..s
  Skipped test-skip.t: missing feature: nail clipper
  # Ran 2 tests, 1 skipped, 0 warned, 0 failed.

  $ cat report.json
  testreport ={
      "test-failure.t": [\{] (re)
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "diff": "", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "success", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }, ? (re)
      "test-skip.t": {
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "diff": "", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "skip", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }, ? (re)
      "test-success.t": [\{] (re)
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "diff": "", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "success", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }
  } (no-eol)
  $ mv backup test-failure.t

backslash on end of line with glob matching is handled properly

  $ cat > test-glob-backslash.t << EOF
  >   $ echo 'foo bar \\'
  >   foo * \ (glob)
  > EOF

  $ rt test-glob-backslash.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

  $ rm -f test-glob-backslash.t

Test globbing of 127.0.0.1
  $ echo 172.16.18.1
  127.0.0.1 (glob)

Test reusability for third party tools
======================================

  $ mkdir "$TESTTMP"/anothertests
  $ cd "$TESTTMP"/anothertests

test that `run-tests.py` can execute hghave, even if it runs not in
Mercurial source tree.

  $ cat > test-hghave.t <<EOF
  > #require true
  >   $ echo foo
  >   foo
  > EOF
  $ rt test-hghave.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

test that RUNTESTDIR refers the directory, in which `run-tests.py` now
running is placed.

  $ cat > test-runtestdir.t <<EOF
  > - $TESTDIR, in which test-run-tests.t is placed
  > - \$TESTDIR, in which test-runtestdir.t is placed (expanded at runtime)
  > - \$RUNTESTDIR, in which run-tests.py is placed (expanded at runtime)
  > 
  > #if windows
  >   $ test "\$TESTDIR" = "$TESTTMP\anothertests"
  > #else
  >   $ test "\$TESTDIR" = "$TESTTMP"/anothertests
  > #endif
  >   $ test "\$RUNTESTDIR" = "$TESTDIR"
  >   $ head -n 3 "\$RUNTESTDIR"/../contrib/check-code.py
  >   #!/usr/bin/env python
  >   #
  >   # check-code - a style and portability checker for Mercurial
  > EOF
  $ rt test-runtestdir.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

#if execbit

test that TESTDIR is referred in PATH

  $ cat > custom-command.sh <<EOF
  > #!/bin/sh
  > echo "hello world"
  > EOF
  $ chmod +x custom-command.sh
  $ cat > test-testdir-path.t <<EOF
  >   $ custom-command.sh
  >   hello world
  > EOF
  $ rt test-testdir-path.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

#endif

test support for --allow-slow-tests
  $ cat > test-very-slow-test.t <<EOF
  > #require slow
  >   $ echo pass
  >   pass
  > EOF
  $ rt test-very-slow-test.t
  s
  Skipped test-very-slow-test.t: missing feature: allow slow tests
  # Ran 0 tests, 1 skipped, 0 warned, 0 failed.
  $ rt $HGTEST_RUN_TESTS_PURE --allow-slow-tests test-very-slow-test.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

support for running a test outside the current directory
  $ mkdir nonlocal
  $ cat > nonlocal/test-is-not-here.t << EOF
  >   $ echo pass
  >   pass
  > EOF
  $ rt nonlocal/test-is-not-here.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

support for bisecting failed tests automatically
  $ hg init bisect
  $ cd bisect
  $ cat >> test-bisect.t <<EOF
  >   $ echo pass
  >   pass
  > EOF
  $ hg add test-bisect.t
  $ hg ci -m 'good'
  $ cat >> test-bisect.t <<EOF
  >   $ echo pass
  >   fail
  > EOF
  $ hg ci -m 'bad'
  $ rt --known-good-rev=0 test-bisect.t
  
  --- $TESTTMP/anothertests/bisect/test-bisect.t
  +++ $TESTTMP/anothertests/bisect/test-bisect.t.err
  @@ -1,4 +1,4 @@
     $ echo pass
     pass
     $ echo pass
  -  fail
  +  pass
  
  ERROR: test-bisect.t output changed
  !
  Failed test-bisect.t: output changed
  test-bisect.t broken by 72cbf122d116 (bad)
  # Ran 1 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]