annotate tests/test-convert-bzr.t @ 27920:da5f23362517 stable

changegroup: cg3 has two empty groups *after* manifests

changegroup.getchunks() determines the end of the stream by looking
for an empty chunk group (two consecutive empty chunks). It ignores
empty groups in the first two groups. Changegroup 3 introduced an
empty chunk between the manifests and the files, which confuses
getchunks(). Since it comes after the first two, getchunks() will stop
there.

Fix by rewriting getchunks so it first counts two groups (empty or
not) and then keeps antostarts counting empty groups. With this counting,
changegroup 1 and 2 have exactly one empty group after the first two
groups, while changegroup 3 has two (one for directories and one for
files).

It's a little hard to test this at this point, but I have verified
that this patch fixes narrowhg (which was broken before this
patch). Also, future patches will fix "hg strip" with treemanifests,
and once that's done, getchunks() will be tested through tests of "hg
strip".

#require bzr

  $ . "$TESTDIR/bzr-definitions"

create and rename on the same file in the same step

  $ mkdir test-createandrename
  $ cd test-createandrename
  $ bzr init -q source

test empty repo conversion (issue3233)

  $ hg convert source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...

back to the rename stuff

  $ cd source
  $ echo a > a
  $ echo c > c
  $ echo e > e
  $ bzr add -q a c e
  $ bzr commit -q -m 'Initial add: a, c, e'
  $ bzr mv a b
  a => b
  $ bzr mv c d
  c => d
  $ bzr mv e f
  e => f
  $ echo a2 >> a
  $ mkdir e
  $ bzr add -q a e
  $ bzr commit -q -m 'rename a into b, create a, rename c into d'
  $ cd ..
  $ hg convert source source-hg
  scanning source...
  sorting...
  converting...
  1 Initial add: a, c, e
  0 rename a into b, create a, rename c into d
  $ glog -R source-hg
  o  1@source "rename a into b, create a, rename c into d" files: a b c d e f
  |
  o  0@source "Initial add: a, c, e" files: a c e
  

manifest

  $ hg manifest -R source-hg -r tip
  a
  b
  d
  f

test --rev option

  $ hg convert -r 1 source source-1-hg
  initializing destination source-1-hg repository
  scanning source...
  sorting...
  converting...
  0 Initial add: a, c, e
  $ glog -R source-1-hg
  o  0@source "Initial add: a, c, e" files: a c e
  

test with filemap

  $ cat > filemap <<EOF
  > exclude a
  > EOF
  $ hg convert --filemap filemap source source-filemap-hg
  initializing destination source-filemap-hg repository
  scanning source...
  sorting...
  converting...
  1 Initial add: a, c, e
  0 rename a into b, create a, rename c into d
  $ hg -R source-filemap-hg manifest -r tip
  b
  d
  f

convert from lightweight checkout

  $ bzr checkout --lightweight source source-light
  $ hg convert -s bzr source-light source-light-hg
  initializing destination source-light-hg repository
  warning: lightweight checkouts may cause conversion failures, try with a regular branch instead.
  $TESTTMP/test-createandrename/source-light does not look like a Bazaar repository
  abort: source-light: missing or unsupported repository
  [255]

extract timestamps that look just like hg's {date|isodate}:
yyyy-mm-dd HH:MM zzzz (no seconds!)
compare timestamps

  $ cd source
  $ bzr log | \
  >   sed '/timestamp/!d;s/.\{15\}\([0-9: -]\{16\}\):.. \(.[0-9]\{4\}\)/\1 \2/' \
  >   > ../bzr-timestamps
  $ cd ..
  $ hg -R source-hg log --template "{date|isodate}\n" > hg-timestamps
  $ cmp bzr-timestamps hg-timestamps || diff -u bzr-timestamps hg-timestamps
  $ cd ..

merge

  $ mkdir test-merge
  $ cd test-merge
  $ cat > helper.py <<EOF
  > import sys
  > from bzrlib import workingtree
  > wt = workingtree.WorkingTree.open('.')
  > 
  > message, stamp = sys.argv[1:]
  > wt.commit(message, timestamp=int(stamp))
  > EOF
  $ bzr init -q source
  $ cd source
  $ echo content > a
  $ echo content2 > b
  $ bzr add -q a b
  $ bzr commit -q -m 'Initial add'
  $ cd ..
  $ bzr branch -q source source-improve
  $ cd source
  $ echo more >> a
  $ python ../helper.py 'Editing a' 100
  $ cd ../source-improve
  $ echo content3 >> b
  $ python ../helper.py 'Editing b' 200
  $ cd ../source
  $ bzr merge -q ../source-improve
  $ bzr commit -q -m 'Merged improve branch'
  $ cd ..
  $ hg convert --datesort source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...
  3 Initial add
  2 Editing a
  1 Editing b
  0 Merged improve branch
  $ glog -R source-hg
  o    3@source "Merged improve branch" files:
  |\
  | o  2@source-improve "Editing b" files: b
  | |
  o |  1@source "Editing a" files: a
  |/
  o  0@source "Initial add" files: a b
  
  $ cd ..

#if symlink execbit

symlinks and executable files

  $ mkdir test-symlinks
  $ cd test-symlinks
  $ bzr init -q source
  $ cd source
  $ touch program
  $ chmod +x program
  $ ln -s program altname
  $ mkdir d
  $ echo a > d/a
  $ ln -s a syma
  $ bzr add -q altname program syma d/a
  $ bzr commit -q -m 'Initial setup'
  $ touch newprog
  $ chmod +x newprog
  $ rm altname
  $ ln -s newprog altname
  $ chmod -x program
  $ bzr add -q newprog
  $ bzr commit -q -m 'Symlink changed, x bits changed'
  $ cd ..
  $ hg convert source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...
  1 Initial setup
  0 Symlink changed, x bits changed
  $ manifest source-hg 0
  % manifest of 0
  644 @ altname
  644   d/a
  755 * program
  644 @ syma
  $ manifest source-hg tip
  % manifest of tip
  644 @ altname
  644   d/a
  755 * newprog
  644   program
  644 @ syma

test the symlinks can be recreated

  $ cd source-hg
  $ hg up
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg cat syma; echo
  a
  $ cd ../..

#endif

Multiple branches

  $ bzr init-repo -q --no-trees repo
  $ bzr init -q repo/trunk
  $ bzr co repo/trunk repo-trunk
  $ cd repo-trunk
  $ echo a > a
  $ bzr add -q a
  $ bzr ci -qm adda
  $ bzr tag trunk-tag
  Created tag trunk-tag.
  $ bzr switch -b branch
  Tree is up to date at revision 1.
  Switched to branch: *repo/branch/ (glob)
  $ sleep 1
  $ echo b > b
  $ bzr add -q b
  $ bzr ci -qm addb
  $ bzr tag branch-tag
  Created tag branch-tag.
  $ bzr switch --force ../repo/trunk
  Updated to revision 1.
  Switched to branch: */repo/trunk/ (glob)
  $ sleep 1
  $ echo a >> a
  $ bzr ci -qm changea
  $ cd ..
  $ hg convert --datesort repo repo-bzr
  initializing destination repo-bzr repository
  scanning source...
  sorting...
  converting...
  2 adda
  1 addb
  0 changea
  updating tags
  $ (cd repo-bzr; glog)
  o  3@default "update tags" files: .hgtags
  |
  o  2@default "changea" files: a
  |
  | o  1@branch "addb" files: b
  |/
  o  0@default "adda" files: a
  

Test tags (converted identifiers are not stable because bzr ones are
not and get incorporated in extra fields).

  $ hg -R repo-bzr tags
  tip                                3:* (glob)
  branch-tag                         1:* (glob)
  trunk-tag                          0:* (glob)

Nested repositories (issue3254)

  $ bzr init-repo -q --no-trees repo/inner
  $ bzr init -q repo/inner/trunk
  $ bzr co repo/inner/trunk inner-trunk
  $ cd inner-trunk
  $ echo b > b
  $ bzr add -q b
  $ bzr ci -qm addb
  $ cd ..
  $ hg convert --datesort repo noinner-bzr
  initializing destination noinner-bzr repository
  scanning source...
  sorting...
  converting...
  2 adda
  1 addb
  0 changea
  updating tags