mercurial/pathutil.py

convert: support incremental conversion with hg subrepos

This was implied in issue3486, which specifically asked for subrepo support in
lfconvert.  Now that lfconvert uses the convert extension internally when going
to normal files, the issue is half fixed.  But now even non largefile repos
benefit when other transformations are needed.

Supporting a full subrepo tree conversion from a single command doesn't seem
reasonable, given the number of options that can be provided, and the
transformations that would need to occur when entering a subrepo (consider
'filemap' paths).  Instead, this allows the user to incrementally convert each
hg subrepo from bottom up like so:

  # so convert knows the dest type when it sees a non empty dest dir
  $ hg init converted

  $ hg convert orig/sub1 converted/sub1
  $ hg convert orig/sub2 converted/sub2
  $ hg convert orig converted

This allows different options to be applied to different subrepos more readily.
It assumes the shamap is in the default location in each converted subrepo for
simplicity.  It also allows for a subrepo to be cloned into place, in case _it_
doesn't need a conversion.  I was able to convert away from using
largefiles/bfiles in several subrepos with this mechanism.

import os, errno, stat, posixpath

import encoding
import util
from i18n import _

def _lowerclean(s):
    return encoding.hfsignoreclean(s.lower())

class pathauditor(object):
    '''ensure that a filesystem path contains no banned components.
    the following properties of a path are checked:

    - ends with a directory separator
    - under top-level .hg
    - starts at the root of a windows drive
    - contains ".."
    - traverses a symlink (e.g. a/symlink_here/b)
    - inside a nested repository (a callback can be used to approve
      some nested repositories, e.g., subrepositories)
    '''

    def __init__(self, root, callback=None):
        self.audited = set()
        self.auditeddir = set()
        self.root = root
        self.callback = callback
        if os.path.lexists(root) and not util.checkcase(root):
            self.normcase = util.normcase
        else:
            self.normcase = lambda x: x

    def __call__(self, path):
        '''Check the relative path.
        path may contain a pattern (e.g. foodir/**.txt)'''

        path = util.localpath(path)
        normpath = self.normcase(path)
        if normpath in self.audited:
            return
        # AIX ignores "/" at end of path, others raise EISDIR.
        if util.endswithsep(path):
            raise util.Abort(_("path ends in directory separator: %s") % path)
        parts = util.splitpath(path)
        if (os.path.splitdrive(path)[0]
            or _lowerclean(parts[0]) in ('.hg', '.hg.', '')
            or os.pardir in parts):
            raise util.Abort(_("path contains illegal component: %s") % path)
        # Windows shortname aliases
        for p in parts:
            if "~" in p:
                first, last = p.split("~", 1)
                if last.isdigit() and first.upper() in ["HG", "HG8B6C"]:
                    raise util.Abort(_("path contains illegal component: %s")
                                     % path)
        if '.hg' in _lowerclean(path):
            lparts = [_lowerclean(p.lower()) for p in parts]
            for p in '.hg', '.hg.':
                if p in lparts[1:]:
                    pos = lparts.index(p)
                    base = os.path.join(*parts[:pos])
                    raise util.Abort(_("path '%s' is inside nested repo %r")
                                     % (path, base))

        normparts = util.splitpath(normpath)
        assert len(parts) == len(normparts)

        parts.pop()
        normparts.pop()
        prefixes = []
        while parts:
            prefix = os.sep.join(parts)
            normprefix = os.sep.join(normparts)
            if normprefix in self.auditeddir:
                break
            curpath = os.path.join(self.root, prefix)
            try:
                st = os.lstat(curpath)
            except OSError, err:
                # EINVAL can be raised as invalid path syntax under win32.
                # They must be ignored for patterns can be checked too.
                if err.errno not in (errno.ENOENT, errno.ENOTDIR, errno.EINVAL):
                    raise
            else:
                if stat.S_ISLNK(st.st_mode):
                    raise util.Abort(
                        _('path %r traverses symbolic link %r')
                        % (path, prefix))
                elif (stat.S_ISDIR(st.st_mode) and
                      os.path.isdir(os.path.join(curpath, '.hg'))):
                    if not self.callback or not self.callback(curpath):
                        raise util.Abort(_("path '%s' is inside nested "
                                           "repo %r")
                                         % (path, prefix))
            prefixes.append(normprefix)
            parts.pop()
            normparts.pop()

        self.audited.add(normpath)
        # only add prefixes to the cache after checking everything: we don't
        # want to add "foo/bar/baz" before checking if there's a "foo/.hg"
        self.auditeddir.update(prefixes)

    def check(self, path):
        try:
            self(path)
            return True
        except (OSError, util.Abort):
            return False

def canonpath(root, cwd, myname, auditor=None):
    '''return the canonical path of myname, given cwd and root'''
    if util.endswithsep(root):
        rootsep = root
    else:
        rootsep = root + os.sep
    name = myname
    if not os.path.isabs(name):
        name = os.path.join(root, cwd, name)
    name = os.path.normpath(name)
    if auditor is None:
        auditor = pathauditor(root)
    if name != rootsep and name.startswith(rootsep):
        name = name[len(rootsep):]
        auditor(name)
        return util.pconvert(name)
    elif name == root:
        return ''
    else:
        # Determine whether `name' is in the hierarchy at or beneath `root',
        # by iterating name=dirname(name) until that causes no change (can't
        # check name == '/', because that doesn't work on windows). The list
        # `rel' holds the reversed list of components making up the relative
        # file name we want.
        rel = []
        while True:
            try:
                s = util.samefile(name, root)
            except OSError:
                s = False
            if s:
                if not rel:
                    # name was actually the same as root (maybe a symlink)
                    return ''
                rel.reverse()
                name = os.path.join(*rel)
                auditor(name)
                return util.pconvert(name)
            dirname, basename = util.split(name)
            rel.append(basename)
            if dirname == name:
                break
            name = dirname

        # A common mistake is to use -R, but specify a file relative to the repo
        # instead of cwd.  Detect that case, and provide a hint to the user.
        hint = None
        try:
            if cwd != root:
                canonpath(root, root, myname, auditor)
                hint = (_("consider using '--cwd %s'")
                        % os.path.relpath(root, cwd))
        except util.Abort:
            pass

        raise util.Abort(_("%s not under root '%s'") % (myname, root),
                         hint=hint)

def normasprefix(path):
    '''normalize the specified path as path prefix

    Returned value can be used safely for "p.startswith(prefix)",
    "p[len(prefix):]", and so on.

    For efficiency, this expects "path" argument to be already
    normalized by "os.path.normpath", "os.path.realpath", and so on.

    See also issue3033 for detail about need of this function.

    >>> normasprefix('/foo/bar').replace(os.sep, '/')
    '/foo/bar/'
    >>> normasprefix('/').replace(os.sep, '/')
    '/'
    '''
    d, p = os.path.splitdrive(path)
    if len(p) != len(os.sep):
        return path + os.sep
    else:
        return path

# forward two methods from posixpath that do what we need, but we'd
# rather not let our internals know that we're thinking in posix terms
# - instead we'll let them be oblivious.
join = posixpath.join
dirname = posixpath.dirname