tests/test-install.t

bundle2: implement consume() API on unbundlepart

We want bundle parts to not be seekable by default. That means
eliminating the generic seek() method.

A common pattern in bundle2.py is to seek to the end of the part
data. This is mainly used by the part iteration code to ensure
the underlying stream is advanced to the next bundle part.

In this commit, we establish a dedicated API for consuming a
bundle2 part data. We switch users of seek() to it.

The old implementation of seek(0, os.SEEK_END) would effectively
call self.read(). The new implementation calls self.read(32768)
in a loop. The old implementation would therefore assemble a
buffer to hold all remaining data being seeked over. For seeking
over large bundle parts, this would involve a large allocation and
a lot of overhead to collect intermediate data! This overhead can
be seen in the results for `hg perfbundleread`:

! bundle2 iterparts()
! wall 10.891305 comb 10.820000 user 7.990000 sys 2.830000 (best of 3)
! wall 8.070791 comb 8.060000 user 7.180000 sys 0.880000 (best of 3)
! bundle2 part seek()
! wall 12.991478 comb 10.390000 user 7.720000 sys 2.670000 (best of 3)
! wall 10.370142 comb 10.350000 user 7.430000 sys 2.920000 (best of 3)

Of course, skipping over large payload data isn't likely very common.
So I doubt the performance wins will be observed in the wild.

Differential Revision: https://phab.mercurial-scm.org/D1388

hg debuginstall
  $ hg debuginstall
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (2.*) (glob)
  checking Python lib (*lib*)... (glob)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*mercurial)... (glob)
  checking registered compression engines (*zlib*) (glob)
  checking available compression engines (*zlib*) (glob)
  checking available compression engines for wire protocol (*zlib*) (glob)
  checking templates (*mercurial?templates)... (glob)
  checking default template (*mercurial?templates?map-cmdline.default) (glob)
  checking commit editor... (* -c "import sys; sys.exit(0)") (glob)
  checking username (test)
  no problems detected

hg debuginstall JSON
  $ hg debuginstall -Tjson | sed 's|\\\\|\\|g'
  [
   {
    "compengines": ["bz2", "bz2truncated", "none", "zlib"*], (glob)
    "compenginesavail": ["bz2", "bz2truncated", "none", "zlib"*], (glob)
    "compenginesserver": [*"zlib"*], (glob)
    "defaulttemplate": "*mercurial?templates?map-cmdline.default", (glob)
    "defaulttemplateerror": null,
    "defaulttemplatenotfound": "default",
    "editor": "* -c \"import sys; sys.exit(0)\"", (glob)
    "editornotfound": false,
    "encoding": "ascii",
    "encodingerror": null,
    "extensionserror": null, (no-pure !)
    "hgmodulepolicy": "*", (glob)
    "hgmodules": "*mercurial", (glob)
    "hgver": "*", (glob)
    "hgverextra": "*", (glob)
    "problems": 0,
    "pythonexe": "*", (glob)
    "pythonlib": "*", (glob)
    "pythonsecurity": [*], (glob)
    "pythonver": "*.*.*", (glob)
    "templatedirs": "*mercurial?templates", (glob)
    "username": "test",
    "usernameerror": null,
    "vinotfound": false
   }
  ]

hg debuginstall with no username
  $ HGUSER= hg debuginstall
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (2.*) (glob)
  checking Python lib (*lib*)... (glob)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*mercurial)... (glob)
  checking registered compression engines (*zlib*) (glob)
  checking available compression engines (*zlib*) (glob)
  checking available compression engines for wire protocol (*zlib*) (glob)
  checking templates (*mercurial?templates)... (glob)
  checking default template (*mercurial?templates?map-cmdline.default) (glob)
  checking commit editor... (* -c "import sys; sys.exit(0)") (glob)
  checking username...
   no username supplied
   (specify a username in your configuration file)
  1 problems detected, please check your install!
  [1]

hg debuginstall with invalid encoding
  $ HGENCODING=invalidenc hg debuginstall | grep encoding
  checking encoding (invalidenc)...
   unknown encoding: invalidenc

exception message in JSON

  $ HGENCODING=invalidenc HGUSER= hg debuginstall -Tjson | grep error
    "defaulttemplateerror": null,
    "encodingerror": "unknown encoding: invalidenc",
    "extensionserror": null, (no-pure !)
    "usernameerror": "no username supplied",

path variables are expanded (~ is the same as $TESTTMP)
  $ mkdir tools
  $ touch tools/testeditor.exe
#if execbit
  $ chmod 755 tools/testeditor.exe
#endif
  $ hg debuginstall --config ui.editor=~/tools/testeditor.exe
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (*) (glob)
  checking Python lib (*lib*)... (glob)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*mercurial)... (glob)
  checking registered compression engines (*zlib*) (glob)
  checking available compression engines (*zlib*) (glob)
  checking available compression engines for wire protocol (*zlib*) (glob)
  checking templates (*mercurial?templates)... (glob)
  checking default template (*mercurial?templates?map-cmdline.default) (glob)
  checking commit editor... (* -c "import sys; sys.exit(0)") (glob)
  checking username (test)
  no problems detected

#if test-repo
  $ . "$TESTDIR/helpers-testrepo.sh"

  $ cat >> wixxml.py << EOF
  > import os, subprocess, sys
  > import xml.etree.ElementTree as ET
  > 
  > # MSYS mangles the path if it expands $TESTDIR
  > testdir = os.environ['TESTDIR']
  > ns = {'wix' : 'http://schemas.microsoft.com/wix/2006/wi'}
  > 
  > def directory(node, relpath):
  >     '''generator of files in the xml node, rooted at relpath'''
  >     dirs = node.findall('./{%(wix)s}Directory' % ns)
  > 
  >     for d in dirs:
  >         for subfile in directory(d, relpath + d.attrib['Name'] + '/'):
  >             yield subfile
  > 
  >     files = node.findall('./{%(wix)s}Component/{%(wix)s}File' % ns)
  > 
  >     for f in files:
  >         yield relpath + f.attrib['Name']
  > 
  > def hgdirectory(relpath):
  >     '''generator of tracked files, rooted at relpath'''
  >     hgdir = "%s/../mercurial" % (testdir)
  >     args = ['hg', '--cwd', hgdir, 'files', relpath]
  >     proc = subprocess.Popen(args, stdout=subprocess.PIPE,
  >                             stderr=subprocess.PIPE)
  >     output = proc.communicate()[0]
  > 
  >     slash = '/'
  >     for line in output.splitlines():
  >         if os.name == 'nt':
  >             yield line.replace(os.sep, slash)
  >         else:
  >             yield line
  > 
  > tracked = [f for f in hgdirectory(sys.argv[1])]
  > 
  > xml = ET.parse("%s/../contrib/wix/%s.wxs" % (testdir, sys.argv[1]))
  > root = xml.getroot()
  > dir = root.find('.//{%(wix)s}DirectoryRef' % ns)
  > 
  > installed = [f for f in directory(dir, '')]
  > 
  > print('Not installed:')
  > for f in sorted(set(tracked) - set(installed)):
  >     print('  %s' % f)
  > 
  > print('Not tracked:')
  > for f in sorted(set(installed) - set(tracked)):
  >     print('  %s' % f)
  > EOF

  $ ( testrepohgenv; $PYTHON wixxml.py help )
  Not installed:
    help/common.txt
    help/hg-ssh.8.txt
    help/hg.1.txt
    help/hgignore.5.txt
    help/hgrc.5.txt
  Not tracked:

  $ ( testrepohgenv; $PYTHON wixxml.py templates )
  Not installed:
  Not tracked:

#endif

#if virtualenv

Verify that Mercurial is installable with pip. Note that this MUST be
the last test in this file, because we do some nasty things to the
shell environment in order to make the virtualenv work reliably.

  $ cd $TESTTMP
Note: --no-site-packages is deprecated, but some places have an
ancient virtualenv from their linux distro or similar and it's not yet
the default for them.
  $ unset PYTHONPATH
  $ $PYTHON -m virtualenv --no-site-packages --never-download installenv >> pip.log
Note: we use this weird path to run pip and hg to avoid platform differences,
since it's bin on most platforms but Scripts on Windows.
  $ ./installenv/*/pip install --no-index $TESTDIR/.. >> pip.log
  $ ./installenv/*/hg debuginstall || cat pip.log
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (2.*) (glob)
  checking Python lib (*)... (glob)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*/mercurial)... (glob)
  checking registered compression engines (*) (glob)
  checking available compression engines (*) (glob)
  checking available compression engines for wire protocol (*) (glob)
  checking templates ($TESTTMP/installenv/*/site-packages/mercurial/templates)... (glob)
  checking default template ($TESTTMP/installenv/*/site-packages/mercurial/templates/map-cmdline.default) (glob)
  checking commit editor... (*) (glob)
  checking username (test)
  no problems detected
#endif