tests/test-http.t

hgweb: send proper HTTP response after uncaught exception

This patch fixes a bug where hgweb would send an incomplete HTTP
response.

If an uncaught exception is raised when hgweb is processing a request,
hgweb attempts to send a generic error response and log that exception.

The server defaults to chunked transfer coding. If an uncaught exception
occurred, it was sending the error response string / chunk properly.
However, RFC 7230 Section 4.1 mandates a 0 size last chunk be sent to
indicate end of the entity body. hgweb was failing to send this last
chunk. As a result, properly written HTTP clients would assume more data
was coming and they would likely time out waiting for another chunk to
arrive.

Mercurial's own test harness was paving over the improper HTTP behavior
by not attempting to read the response body if the status code was 500.
This incorrect workaround was added in ba6577a19656 and has been removed
with this patch.

#require serve

  $ hg init test
  $ cd test
  $ echo foo>foo
  $ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg
  $ echo foo>foo.d/foo
  $ echo bar>foo.d/bAr.hg.d/BaR
  $ echo bar>foo.d/baR.d.hg/bAR
  $ hg commit -A -m 1
  adding foo
  adding foo.d/bAr.hg.d/BaR
  adding foo.d/baR.d.hg/bAR
  adding foo.d/foo
  $ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log
  $ hg --config server.uncompressed=False serve -p $HGPORT1 -d --pid-file=../hg2.pid

Test server address cannot be reused

#if windows
  $ hg serve -p $HGPORT1 2>&1
  abort: cannot start server at ':$HGPORT1': * (glob)
  [255]
#else
  $ hg serve -p $HGPORT1 2>&1
  abort: cannot start server at ':$HGPORT1': Address already in use
  [255]
#endif
  $ cd ..
  $ cat hg1.pid hg2.pid >> $DAEMON_PIDS

clone via stream

  $ hg clone --uncompressed http://localhost:$HGPORT/ copy 2>&1
  streaming all changes
  6 files to transfer, 606 bytes of data
  transferred * bytes in * seconds (*/sec) (glob)
  searching for changes
  no changes found
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg verify -R copy
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  4 files, 1 changesets, 4 total revisions

try to clone via stream, should use pull instead

  $ hg clone --uncompressed http://localhost:$HGPORT1/ copy2
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 4 changes to 4 files
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved

clone via pull

  $ hg clone http://localhost:$HGPORT1/ copy-pull
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 4 changes to 4 files
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg verify -R copy-pull
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  4 files, 1 changesets, 4 total revisions
  $ cd test
  $ echo bar > bar
  $ hg commit -A -d '1 0' -m 2
  adding bar
  $ cd ..

clone over http with --update

  $ hg clone http://localhost:$HGPORT1/ updated --update 0
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 5 changes to 5 files
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg log -r . -R updated
  changeset:   0:8b6053c928fe
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     1
  
  $ rm -rf updated

incoming via HTTP

  $ hg clone http://localhost:$HGPORT1/ --rev 0 partial
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 4 changes to 4 files
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd partial
  $ touch LOCAL
  $ hg ci -qAm LOCAL
  $ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n'
  comparing with http://localhost:$HGPORT1/
  searching for changes
  2
  $ cd ..

pull

  $ cd copy-pull
  $ echo '[hooks]' >> .hg/hgrc
  $ echo "changegroup = python \"$TESTDIR/printenv.py\" changegroup" >> .hg/hgrc
  $ hg pull
  pulling from http://localhost:$HGPORT1/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  changegroup hook: HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_URL=http://localhost:$HGPORT1/
  (run 'hg update' to get a working copy)
  $ cd ..

clone from invalid URL

  $ hg clone http://localhost:$HGPORT/bad
  abort: HTTP Error 404: Not Found
  [255]

test http authentication
+ use the same server to test server side streaming preference

  $ cd test
  $ cat << EOT > userpass.py
  > import base64
  > from mercurial.hgweb import common
  > def perform_authentication(hgweb, req, op):
  >     auth = req.env.get('HTTP_AUTHORIZATION')
  >     if not auth:
  >         raise common.ErrorResponse(common.HTTP_UNAUTHORIZED, 'who',
  >                 [('WWW-Authenticate', 'Basic Realm="mercurial"')])
  >     if base64.b64decode(auth.split()[1]).split(':', 1) != ['user', 'pass']:
  >         raise common.ErrorResponse(common.HTTP_FORBIDDEN, 'no')
  > def extsetup():
  >     common.permhooks.insert(0, perform_authentication)
  > EOT
  $ hg --config extensions.x=userpass.py serve -p $HGPORT2 -d --pid-file=pid \
  >    --config server.preferuncompressed=True \
  >    --config web.push_ssl=False --config web.allow_push=* -A ../access.log
  $ cat pid >> $DAEMON_PIDS

  $ cat << EOF > get_pass.py
  > import getpass
  > def newgetpass(arg):
  >   return "pass"
  > getpass.getpass = newgetpass
  > EOF

#if python243
  $ hg id http://localhost:$HGPORT2/
  abort: http authorization required for http://localhost:$HGPORT2/
  [255]
  $ hg id http://localhost:$HGPORT2/
  abort: http authorization required for http://localhost:$HGPORT2/
  [255]
  $ hg id --config ui.interactive=true --config extensions.getpass=get_pass.py http://user@localhost:$HGPORT2/
  http authorization required for http://localhost:$HGPORT2/
  realm: mercurial
  user: user
  password: 5fed3813f7f5
  $ hg id http://user:pass@localhost:$HGPORT2/
  5fed3813f7f5
#endif
  $ echo '[auth]' >> .hg/hgrc
  $ echo 'l.schemes=http' >> .hg/hgrc
  $ echo 'l.prefix=lo' >> .hg/hgrc
  $ echo 'l.username=user' >> .hg/hgrc
  $ echo 'l.password=pass' >> .hg/hgrc
  $ hg id http://localhost:$HGPORT2/
  5fed3813f7f5
  $ hg id http://localhost:$HGPORT2/
  5fed3813f7f5
  $ hg id http://user@localhost:$HGPORT2/
  5fed3813f7f5
#if python243
  $ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1
  streaming all changes
  7 files to transfer, 916 bytes of data
  transferred * bytes in * seconds (*/sec) (glob)
  searching for changes
  no changes found
  updating to branch default
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg id http://user2@localhost:$HGPORT2/
  abort: http authorization required for http://localhost:$HGPORT2/
  [255]
  $ hg id http://user:pass2@localhost:$HGPORT2/
  abort: HTTP Error 403: no
  [255]

  $ hg -R dest tag -r tip top
  $ hg -R dest push http://user:pass@localhost:$HGPORT2/
  pushing to http://user:***@localhost:$HGPORT2/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  $ hg rollback -q

  $ cut -c38- ../access.log
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=branchmap HTTP/1.1" 200 -
  "GET /?cmd=stream_out HTTP/1.1" 401 -
  "GET /?cmd=stream_out HTTP/1.1" 200 -
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D5fed3813f7f5e1824344fdc9cf8f63bb662c292d
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 403 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=phases
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "GET /?cmd=branchmap HTTP/1.1" 200 -
  "GET /?cmd=branchmap HTTP/1.1" 200 -
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+5eb5abfefeea63c80dd7553bcc3783f37e0c5524
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases

#endif
  $ cd ..

clone of serve with repo in root and unserved subrepo (issue2970)

  $ hg --cwd test init sub
  $ echo empty > test/sub/empty
  $ hg --cwd test/sub add empty
  $ hg --cwd test/sub commit -qm 'add empty'
  $ hg --cwd test/sub tag -r 0 something
  $ echo sub = sub > test/.hgsub
  $ hg --cwd test add .hgsub
  $ hg --cwd test commit -qm 'add subrepo'
  $ hg clone http://localhost:$HGPORT noslash-clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 7 changes to 7 files
  updating to branch default
  abort: HTTP Error 404: Not Found
  [255]
  $ hg clone http://localhost:$HGPORT/ slash-clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 7 changes to 7 files
  updating to branch default
  abort: HTTP Error 404: Not Found
  [255]

check error log

  $ cat error.log