annotate tests/test-alias.t @ 26631:e077ce385609

localrepo: restore dirstate to one before rollbacking if not parent-gone

'localrepository.rollback()' explicilty restores dirstate, only if at
least one of current parents of the working directory is removed at
rollbacking (a.k.a "parent-gone").

After DirstateTransactionPlan, 'dirstate.write()' will cause marking
'.hg/dirstate' as a file to be restored at rollbacking.

    https://mercurial.selenic.com/wiki/DirstateTransactionPlan

Then, 'transaction.rollback()' restores '.hg/dirstate' regardless of
parents of the working directory at that time, and this causes
unexpected dirstate changes if not "parent-gone" (e.g.  "hg update" to
another branch after "hg commit" or so, then "hg rollback").

To avoid such situation, this patch restores dirstate to one before
rollbacking if not "parent-gone".

  before:
    b1. restore dirstate explicitly, if "parent-gone"

  after:
    a1. save dirstate before actual rollbacking via dirstateguard
    a2. restore dirstate via 'transaction.rollback()'
    a3. if "parent-gone"
        - discard backup (a1)
        - restore dirstate from 'undo.dirstate'
    a4. otherwise, restore dirstate from backup (a1)

Even though restoring dirstate at (a3) after (a2) seems redundant,
this patch keeps this existing code path, because:

  - it isn't ensured that 'dirstate.write()' was invoked at least once
    while transaction running

    If not, '.hg/dirstate' isn't restored at (a2).

    In addition to it, rude 3rd party extension invoking
    'dirstate.write()' without 'repo' while transaction running (see
    subsequent patches for detail) may break consistency of a file
    backup-ed by transaction.

  - this patch mainly focuses on changes for DirstateTransactionPlan

    Restoring dirstate at (a3) itself should be cheaper enough than
    rollbacking itself. Redundancy will be removed in next step.

Newly added test is almost meaningless at this point. It will be used
to detect regression while implementing delayed dirstate write out.

  $ HGFOO=BAR; export HGFOO
  $ cat >> $HGRCPATH <<EOF
  > [alias]
  > # should clobber ci but not commit (issue2993)
  > ci = version
  > myinit = init
  > mycommit = commit
  > optionalrepo = showconfig alias.myinit
  > cleanstatus = status -c
  > unknown = bargle
  > ambiguous = s
  > recursive = recursive
  > disabled = email
  > nodefinition =
  > noclosingquotation = '
  > no--cwd = status --cwd elsewhere
  > no-R = status -R elsewhere
  > no--repo = status --repo elsewhere
  > no--repository = status --repository elsewhere
  > no--config = status --config a.config=1
  > mylog = log
  > lognull = log -r null
  > shortlog = log --template '{rev} {node|short} | {date|isodate}\n'
  > positional = log --template '{\$2} {\$1} | {date|isodate}\n'
  > dln = lognull --debug
  > nousage = rollback
  > put = export -r 0 -o "\$FOO/%R.diff"
  > blank = !printf '\n'
  > self = !printf '\$0\n'
  > echoall = !printf '\$@\n'
  > echo1 = !printf '\$1\n'
  > echo2 = !printf '\$2\n'
  > echo13 = !printf '\$1 \$3\n'
  > echotokens = !printf "%s\n" "\$@"
  > count = !hg log -r "\$@" --template=. | wc -c | sed -e 's/ //g'
  > mcount = !hg log \$@ --template=. | wc -c | sed -e 's/ //g'
  > rt = root
  > tglog = log -G --template "{rev}:{node|short}: '{desc}' {branches}\n"
  > idalias = id
  > idaliaslong = id
  > idaliasshell = !echo test
  > parentsshell1 = !echo one
  > parentsshell2 = !echo two
  > escaped1 = !printf 'test\$\$test\n'
  > escaped2 = !sh -c 'echo "HGFOO is \$\$HGFOO"'
  > escaped3 = !sh -c 'echo "\$1 is \$\$\$1"'
  > escaped4 = !printf '\$\$0 \$\$@\n'
  > exit1 = !sh -c 'exit 1'
  > 
  > [defaults]
  > mylog = -q
  > lognull = -q
  > log = -v
  > EOF


basic

  $ hg myinit alias


unknown

  $ hg unknown
  abort: alias 'unknown' resolves to unknown command 'bargle'
  [255]
  $ hg help unknown
  alias 'unknown' resolves to unknown command 'bargle'


ambiguous

  $ hg ambiguous
  abort: alias 'ambiguous' resolves to ambiguous command 's'
  [255]
  $ hg help ambiguous
  alias 'ambiguous' resolves to ambiguous command 's'


recursive

  $ hg recursive
  abort: alias 'recursive' resolves to unknown command 'recursive'
  [255]
  $ hg help recursive
  alias 'recursive' resolves to unknown command 'recursive'


disabled

  $ hg disabled
  abort: alias 'disabled' resolves to unknown command 'email'
  ('email' is provided by 'patchbomb' extension)
  [255]
  $ hg help disabled
  alias 'disabled' resolves to unknown command 'email'
  
  'email' is provided by the following extension:
  
      patchbomb     command to send changesets as (a series of) patch emails
  
  (use "hg help extensions" for information on enabling extensions)


no definition

  $ hg nodef
  abort: no definition for alias 'nodefinition'
  [255]
  $ hg help nodef
  no definition for alias 'nodefinition'


no closing quotation

  $ hg noclosing
  abort: error in definition for alias 'noclosingquotation': No closing quotation
  [255]
  $ hg help noclosing
  error in definition for alias 'noclosingquotation': No closing quotation


invalid options

  $ hg no--cwd
  abort: error in definition for alias 'no--cwd': --cwd may only be given on the command line
  [255]
  $ hg help no--cwd
  error in definition for alias 'no--cwd': --cwd may only be given on the
  command line
  $ hg no-R
  abort: error in definition for alias 'no-R': -R may only be given on the command line
  [255]
  $ hg help no-R
  error in definition for alias 'no-R': -R may only be given on the command line
  $ hg no--repo
  abort: error in definition for alias 'no--repo': --repo may only be given on the command line
  [255]
  $ hg help no--repo
  error in definition for alias 'no--repo': --repo may only be given on the
  command line
  $ hg no--repository
  abort: error in definition for alias 'no--repository': --repository may only be given on the command line
  [255]
  $ hg help no--repository
  error in definition for alias 'no--repository': --repository may only be given
  on the command line
  $ hg no--config
  abort: error in definition for alias 'no--config': --config may only be given on the command line
  [255]

optional repository

#if no-outer-repo
  $ hg optionalrepo
  init
#endif
  $ cd alias
  $ cat > .hg/hgrc <<EOF
  > [alias]
  > myinit = init -q
  > EOF
  $ hg optionalrepo
  init -q

no usage

  $ hg nousage
  no rollback information available
  [1]

  $ echo foo > foo
  $ hg commit -Amfoo
  adding foo


with opts

  $ hg cleanst
  C foo


with opts and whitespace

  $ hg shortlog
  0 e63c23eaa88a | 1970-01-01 00:00 +0000

positional arguments

  $ hg positional
  abort: too few arguments for command alias
  [255]
  $ hg positional a
  abort: too few arguments for command alias
  [255]
  $ hg positional 'node|short' rev
  0 e63c23eaa88a | 1970-01-01 00:00 +0000

interaction with defaults

  $ hg mylog
  0:e63c23eaa88a
  $ hg lognull
  -1:000000000000


properly recursive

  $ hg dln
  changeset:   -1:0000000000000000000000000000000000000000
  phase:       public
  parent:      -1:0000000000000000000000000000000000000000
  parent:      -1:0000000000000000000000000000000000000000
  manifest:    -1:0000000000000000000000000000000000000000
  user:        
  date:        Thu Jan 01 00:00:00 1970 +0000
  extra:       branch=default
  


path expanding

  $ FOO=`pwd` hg put
  $ cat 0.diff
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID e63c23eaa88ae77967edcf4ea194d31167c478b0
  # Parent  0000000000000000000000000000000000000000
  foo
  
  diff -r 000000000000 -r e63c23eaa88a foo
  --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -0,0 +1,1 @@
  +foo


simple shell aliases

  $ hg blank
  
  $ hg blank foo
  
  $ hg self
  self
  $ hg echoall
  
  $ hg echoall foo
  foo
  $ hg echoall 'test $2' foo
  test $2 foo
  $ hg echoall 'test $@' foo '$@'
  test $@ foo $@
  $ hg echoall 'test "$@"' foo '"$@"'
  test "$@" foo "$@"
  $ hg echo1 foo bar baz
  foo
  $ hg echo2 foo bar baz
  bar
  $ hg echo13 foo bar baz test
  foo baz
  $ hg echo2 foo
  
  $ hg echotokens
  
  $ hg echotokens foo 'bar $1 baz'
  foo
  bar $1 baz
  $ hg echotokens 'test $2' foo
  test $2
  foo
  $ hg echotokens 'test $@' foo '$@'
  test $@
  foo
  $@
  $ hg echotokens 'test "$@"' foo '"$@"'
  test "$@"
  foo
  "$@"
  $ echo bar > bar
  $ hg commit -qA -m bar
  $ hg count .
  1
  $ hg count 'branch(default)'
  2
  $ hg mcount -r '"branch(default)"'
  2

  $ hg tglog
  @  1:042423737847: 'bar'
  |
  o  0:e63c23eaa88a: 'foo'
  


shadowing

  $ hg i
  hg: command 'i' is ambiguous:
      idalias idaliaslong idaliasshell identify import incoming init
  [255]
  $ hg id
  042423737847 tip
  $ hg ida
  hg: command 'ida' is ambiguous:
      idalias idaliaslong idaliasshell
  [255]
  $ hg idalias
  042423737847 tip
  $ hg idaliasl
  042423737847 tip
  $ hg idaliass
  test
  $ hg parentsshell
  hg: command 'parentsshell' is ambiguous:
      parentsshell1 parentsshell2
  [255]
  $ hg parentsshell1
  one
  $ hg parentsshell2
  two


shell aliases with global options

  $ hg init sub
  $ cd sub
  $ hg count 'branch(default)'
  abort: unknown revision 'default'!
  0
  $ hg -v count 'branch(default)'
  abort: unknown revision 'default'!
  0
  $ hg -R .. count 'branch(default)'
  abort: unknown revision 'default'!
  0
  $ hg --cwd .. count 'branch(default)'
  2
  $ hg echoall --cwd ..
  


repo specific shell aliases

  $ cat >> .hg/hgrc <<EOF
  > [alias]
  > subalias = !echo sub
  > EOF
  $ cat >> ../.hg/hgrc <<EOF
  > [alias]
  > mainalias = !echo main
  > EOF


shell alias defined in current repo

  $ hg subalias
  sub
  $ hg --cwd .. subalias > /dev/null
  hg: unknown command 'subalias'
  (did you mean one of idalias?)
  [255]
  $ hg -R .. subalias > /dev/null
  hg: unknown command 'subalias'
  (did you mean one of idalias?)
  [255]


shell alias defined in other repo

  $ hg mainalias > /dev/null
  hg: unknown command 'mainalias'
  (did you mean one of idalias?)
  [255]
  $ hg -R .. mainalias
  main
  $ hg --cwd .. mainalias
  main

typos get useful suggestions
  $ hg --cwd .. manalias
  hg: unknown command 'manalias'
  (did you mean one of idalias, mainalias, manifest?)
  [255]

shell aliases with escaped $ chars

  $ hg escaped1
  test$test
  $ hg escaped2
  HGFOO is BAR
  $ hg escaped3 HGFOO
  HGFOO is BAR
  $ hg escaped4 test
  $0 $@

abbreviated name, which matches against both shell alias and the
command provided extension, should be aborted.

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > hgext.rebase =
  > EOF
#if windows
  $ cat >> .hg/hgrc <<EOF
  > [alias]
  > rebate = !echo this is %HG_ARGS%
  > EOF
#else
  $ cat >> .hg/hgrc <<EOF
  > [alias]
  > rebate = !echo this is \$HG_ARGS
  > EOF
#endif
  $ hg reba
  hg: command 'reba' is ambiguous:
      rebase rebate
  [255]
  $ hg rebat
  this is rebate
  $ hg rebat --foo-bar
  this is rebate --foo-bar

invalid arguments

  $ hg rt foo
  hg rt: invalid arguments
  hg rt
  
  alias for: hg root
  
  (use "hg rt -h" to show more help)
  [255]

invalid global arguments for normal commands, aliases, and shell aliases

  $ hg --invalid root
  hg: option --invalid not recognized
  Mercurial Distributed SCM
  
  basic commands:
  
   add           add the specified files on the next commit
   annotate      show changeset information by line for each file
   clone         make a copy of an existing repository
   commit        commit the specified files or all outstanding changes
   diff          diff repository (or selected files)
   export        dump the header and diffs for one or more changesets
   forget        forget the specified files on the next commit
   init          create a new repository in the given directory
   log           show revision history of entire repository or files
   merge         merge another revision into working directory
   pull          pull changes from the specified source
   push          push changes to the specified destination
   remove        remove the specified files on the next commit
   serve         start stand-alone webserver
   status        show changed files in the working directory
   summary       summarize working directory state
   update        update working directory (or switch revisions)
  
  (use "hg help" for the full list of commands or "hg -v" for details)
  [255]
  $ hg --invalid mylog
  hg: option --invalid not recognized
  Mercurial Distributed SCM
  
  basic commands:
  
   add           add the specified files on the next commit
   annotate      show changeset information by line for each file
   clone         make a copy of an existing repository
   commit        commit the specified files or all outstanding changes
   diff          diff repository (or selected files)
   export        dump the header and diffs for one or more changesets
   forget        forget the specified files on the next commit
   init          create a new repository in the given directory
   log           show revision history of entire repository or files
   merge         merge another revision into working directory
   pull          pull changes from the specified source
   push          push changes to the specified destination
   remove        remove the specified files on the next commit
   serve         start stand-alone webserver
   status        show changed files in the working directory
   summary       summarize working directory state
   update        update working directory (or switch revisions)
  
  (use "hg help" for the full list of commands or "hg -v" for details)
  [255]
  $ hg --invalid blank
  hg: option --invalid not recognized
  Mercurial Distributed SCM
  
  basic commands:
  
   add           add the specified files on the next commit
   annotate      show changeset information by line for each file
   clone         make a copy of an existing repository
   commit        commit the specified files or all outstanding changes
   diff          diff repository (or selected files)
   export        dump the header and diffs for one or more changesets
   forget        forget the specified files on the next commit
   init          create a new repository in the given directory
   log           show revision history of entire repository or files
   merge         merge another revision into working directory
   pull          pull changes from the specified source
   push          push changes to the specified destination
   remove        remove the specified files on the next commit
   serve         start stand-alone webserver
   status        show changed files in the working directory
   summary       summarize working directory state
   update        update working directory (or switch revisions)
  
  (use "hg help" for the full list of commands or "hg -v" for details)
  [255]

This should show id:

  $ hg --config alias.log='id' log
  000000000000 tip

This shouldn't:

  $ hg --config alias.log='id' history

  $ cd ../..

return code of command and shell aliases:

  $ hg mycommit -R alias
  nothing changed
  [1]
  $ hg exit1
  [1]

#if no-outer-repo
  $ hg root
  abort: no repository found in '$TESTTMP' (.hg not found)!
  [255]
  $ hg --config alias.hgroot='!hg root' hgroot
  abort: no repository found in '$TESTTMP' (.hg not found)!
  [255]
#endif