annotate tests/test-copy.t @ 49777:e1953a34c110

bundle: emit full snapshot as is, without doing a redelta

With the new `forced` delta-reused policy, it become important to be able to
send full snapshot where full snapshot are needed. Otherwise, the fallback delta
will simply be used on the client side… creating monstrous delta chain, since
revision that are meant as a reset of delta-chain chain becoming too complex are
simply adding a new full delta-tree on the leaf of another one.

In the `non-forced` cases, client process full snapshot from the bundle
differently from deltas, so client will still try to convert the full snapshot
into a delta if possible. So this will no lead to pathological storage
explosion.

I have considered making this configurable, but the impact seems limited enough
that it does not seems to be worth it. Especially with the current
sparse-revlog format that use "delta-tree" with multiple level snapshots, full
snapshot are much less frequent and not that different from other intermediate
snapshot that we are already sending over the wire anyway.

CPU wise, this will help the bundling side a little as it will not need to
reconstruct revisions and compute deltas. The unbundling side might save a tiny
amount of CPU as it won't need to reconstruct the delta-base to reconstruct the
revision full text. This only slightly visible in some of the benchmarks. And
have no real impact on most of them.

### data-env-vars.name      = pypy-2018-08-01-zstd-sparse-revlog
  # benchmark.name          = perf-bundle
  # benchmark.variants.revs = last-40000
before:          11.467186 seconds
just-emit-full:  11.190576 seconds   (-2.41%)
with-pull-force: 11.041091 seconds   (-3.72%)
  # benchmark.name          = perf-unbundle
  # benchmark.variants.revs = last-40000
before:     16.744862
just-emit-full:: 16.561036 seconds   (-1.10%)
with-pull-force: 16.389344 seconds   (-2.12%)
  # benchmark.name          = pull
  # benchmark.variants.revs = last-40000
before:     26.870569
just-emit-full:  26.391188 seconds   (-1.78%)
with-pull-force: 25.633184 seconds   (-4.60%)


Space wise (so network-wise) the impact is fairly small. When taking compression into
account.

Below are tests the size of `hg bundle --all` for a handful of benchmark repositories
(with bzip, zstd compression and without it)

This show a small increase in the bundle size, but nothing really significant
except maybe for mozilla-try (+12%) that nobody really pulls large chunk of anyway.
Mozilla-try is also the repository that benefit the most for not having to
recompute deltas client size.

### mercurial:
bzip-before:     26 406 342 bytes
bzip-after:      26 691 543 bytes  +1.08%

zstd-before:     27 918 645 bytes
zstd-after:      28 075 896 bytes  +0.56%

none-before:     98 675 601 bytes
none-after:     100 411 237 bytes  +1.76%


### pypy
bzip-before:    201 295 752 bytes
bzip-after:     209 780 282 bytes  +4.21%

zstd-before:    202 974 795 bytes
zstd-after:     205 165 780 bytes  +1.08%

none-before:    871 070 261 bytes
none-after:     993 595 057 bytes +14.07%


### netbeans
bzip-before:    601 314 330 bytes
bzip-after:     614 246 241 bytes  +2.15%

zstd-before:    604 745 136 bytes
zstd-after:     615 497 705 bytes  +1.78%

none-before:  3 338 238 571 bytes
none-after:   3 439 422 535 bytes  +3.03%


### mozilla-central
bzip-before:  1 493 006 921 bytes
bzip-after:   1 549 650 570 bytes  +3.79%

zstd-before:  1 481 910 102 bytes
zstd-after:   1 513 052 415 bytes  +2.10%

none-before:  6 535 929 910 bytes
none-after:   7 010 191 342 bytes  +7.26%


### mozilla-try
bzip-before:  6 583 425 999 bytes
bzip-after:   7 423 536 928 bytes +12.76%

zstd-before:  6 021 009 212 bytes
zstd-after:   6 674 922 420 bytes +10.86%

none-before: 22 954 739 558 bytes
none-after:  26 013 854 771 bytes +13.32%

  $ mkdir part1
  $ cd part1

  $ hg init
  $ echo a > a
  $ hg add a
  $ hg commit -m "1"
  $ hg status
  $ hg copy a b
  $ hg --config ui.portablefilenames=abort copy a con.xml
  abort: filename contains 'con', which is reserved on Windows: con.xml
  [10]
  $ hg status
  A b
  $ hg sum
  parent: 0:c19d34741b0a tip
   1
  branch: default
  commit: 1 copied
  update: (current)
  phases: 1 draft
  $ hg --debug commit -m "2"
  committing files:
  b
   b: copy a:b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3
  committing manifest
  committing changelog
  updating the branch cache
  committed changeset 1:93580a2c28a50a56f63526fb305067e6fbf739c4

we should see two history entries

  $ hg history -v
  changeset:   1:93580a2c28a5
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       b
  description:
  2
  
  
  changeset:   0:c19d34741b0a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       a
  description:
  1
  
  

we should see one log entry for a

  $ hg log a
  changeset:   0:c19d34741b0a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     1
  

this should show a revision linked to changeset 0

  $ hg debugindex a
     rev linkrev       nodeid    p1-nodeid    p2-nodeid
       0       0 b789fdd96dc2 000000000000 000000000000

we should see one log entry for b

  $ hg log b
  changeset:   1:93580a2c28a5
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     2
  

this should show a revision linked to changeset 1

  $ hg debugindex b
     rev linkrev       nodeid    p1-nodeid    p2-nodeid
       0       1 37d9b5d994ea 000000000000 000000000000

this should show the rename information in the metadata

  $ hg debugdata b 0 | head -3 | tail -2
  copy: a
  copyrev: b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3

#if reporevlogstore
  $ md5sum.py .hg/store/data/b.i
  44913824c8f5890ae218f9829535922e  .hg/store/data/b.i
#endif
  $ hg cat b > bsum
  $ md5sum.py bsum
  60b725f10c9c85c70d97880dfe8191b3  bsum
  $ hg cat a > asum
  $ md5sum.py asum
  60b725f10c9c85c70d97880dfe8191b3  asum
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 2 changesets with 2 changes to 2 files

  $ cd ..


  $ mkdir part2
  $ cd part2

  $ hg init
  $ echo foo > foo
should fail - foo is not managed
  $ hg mv foo bar
  foo: not copying - file is not managed
  abort: no files to copy
  (maybe you meant to use --after --at-rev=.)
  [10]
  $ hg st -A
  ? foo
respects ui.relative-paths
  $ mkdir dir
  $ cd dir
  $ hg mv ../foo ../bar
  ../foo: not copying - file is not managed
  abort: no files to copy
  (maybe you meant to use --after --at-rev=.)
  [10]
  $ hg mv ../foo ../bar --config ui.relative-paths=yes
  ../foo: not copying - file is not managed
  abort: no files to copy
  (maybe you meant to use --after --at-rev=.)
  [10]
  $ hg mv ../foo ../bar --config ui.relative-paths=no
  foo: not copying - file is not managed
  abort: no files to copy
  (maybe you meant to use --after --at-rev=.)
  [10]
  $ cd ..
  $ rmdir dir
  $ hg add foo
dry-run; print a warning that this is not a real copy; foo is added
  $ hg mv --dry-run foo bar
  foo has not been committed yet, so no copy data will be stored for bar.
  $ hg st -A
  A foo
should print a warning that this is not a real copy; bar is added
  $ hg mv foo bar
  foo has not been committed yet, so no copy data will be stored for bar.
  $ hg st -A
  A bar
should print a warning that this is not a real copy; foo is added
  $ hg cp bar foo
  bar has not been committed yet, so no copy data will be stored for foo.
  $ hg rm -f bar
  $ rm bar
  $ hg st -A
  A foo
  $ hg commit -m1

moving a missing file
  $ rm foo
  $ hg mv foo foo3
  foo: deleted in working directory
  foo3 does not exist!
  $ hg up -qC .

copy --after to a nonexistent target filename
  $ hg cp -A foo dummy
  foo: not recording copy - dummy does not exist
  [1]

dry-run; should show that foo is clean
  $ hg copy --dry-run foo bar
  $ hg st -A
  C foo
should show copy
  $ hg copy foo bar
  $ hg st -C
  A bar
    foo

shouldn't show copy
  $ hg commit -m2
  $ hg st -C

should match
  $ hg debugindex foo
     rev linkrev       nodeid    p1-nodeid    p2-nodeid
       0       0 2ed2a3912a0b 000000000000 000000000000
  $ hg debugrename bar
  bar renamed from foo:2ed2a3912a0b24502043eae84ee4b279c18b90dd

  $ echo bleah > foo
  $ echo quux > bar
  $ hg commit -m3

should not be renamed
  $ hg debugrename bar
  bar not renamed

  $ hg copy -f foo bar
should show copy
  $ hg st -C
  M bar
    foo

XXX: filtering lfilesrepo.status() in 3.3-rc causes the copy source to not be
displayed.
  $ hg st -C --config extensions.largefiles=
  The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
  M bar
    foo

  $ hg commit -m3

should show no parents for tip
  $ hg debugindex bar
     rev linkrev       nodeid    p1-nodeid    p2-nodeid
       0       1 7711d36246cc 000000000000 000000000000
       1       2 bdf70a2b8d03 7711d36246cc 000000000000
       2       3 b2558327ea8d 000000000000 000000000000
should match
  $ hg debugindex foo
     rev linkrev       nodeid    p1-nodeid    p2-nodeid
       0       0 2ed2a3912a0b 000000000000 000000000000
       1       2 dd12c926cf16 2ed2a3912a0b 000000000000
  $ hg debugrename bar
  bar renamed from foo:dd12c926cf165e3eb4cf87b084955cb617221c17

should show no copies
  $ hg st -C

note: since filelog based copy tracing only trace copy for new file, the copy information here is not displayed.

  $ hg status --copies --change .
  M bar

They are a devel option to walk all file and fine this information anyway.

  $ hg status --copies --change . --config devel.copy-tracing.trace-all-files=yes
  M bar
    foo

copy --after on an added file
  $ cp bar baz
  $ hg add baz
  $ hg cp -A bar baz
  $ hg st -C
  A baz
    bar

foo was clean:
  $ hg st -AC foo
  C foo
Trying to copy on top of an existing file fails,
  $ hg copy -A bar foo
  foo: not overwriting - file already committed
  ('hg copy --after --force' to replace the file by recording a copy)
  [1]
same error without the --after, so the user doesn't have to go through
two hints:
  $ hg copy bar foo
  foo: not overwriting - file already committed
  ('hg copy --force' to replace the file by recording a copy)
  [1]
but it's considered modified after a copy --after --force
  $ hg copy -Af bar foo
  $ hg st -AC foo
  M foo
    bar
The hint for a file that exists but is not in file history doesn't
mention --force:
  $ touch xyzzy
  $ hg cp bar xyzzy
  xyzzy: not overwriting - file exists
  ('hg copy --after' to record the copy)
  [1]
  $ hg co -qC .
  $ rm baz xyzzy


Test unmarking copy/rename of a single file

# Set up by creating a copy
  $ hg cp bar baz
# Test unmarking as copy a non-existent file
  $ hg copy --forget non-existent
  non-existent: $ENOENT$
  $ hg rename --forget non-existent
  non-existent: $ENOENT$
# Test unmarking as copy an tracked but unrelated file
  $ hg copy --forget foo
  foo: not unmarking as copy - file is not marked as copied
  $ hg rename --forget foo
  foo: not unmarking as copy - file is not marked as copied
# Test unmarking as copy a copy source
  $ hg copy --forget bar
  bar: not unmarking as copy - file is not marked as copied
  $ hg rename --forget bar
  bar: not unmarking as copy - file is not marked as copied
# baz should still be marked as a copy
  $ hg st -C
  A baz
    bar
# Test the normal case
  $ hg copy --forget baz
  $ hg st -C
  A baz
  $ rm bar
  $ hg rename --after bar baz
  $ hg st -C
  A baz
    bar
  R bar
  $ hg rename --forget baz
  $ hg st -C
  A baz
  R bar
  $ hg revert bar
# Test unmarking as copy with matching an non-matching patterns
  $ hg cp bar baz --after
  $ hg copy --forget bar baz
  bar: not unmarking as copy - file is not marked as copied
  $ hg cp bar baz --after
  $ hg rename --forget bar baz
  bar: not unmarking as copy - file is not marked as copied
  $ hg st -C
  A baz
# Test unmarking as copy with no exact matches
  $ hg cp bar baz --after
  $ hg copy --forget .
  $ hg st -C
  A baz
  $ hg cp bar baz --after
  $ hg st -C
  A baz
    bar
  $ hg rename --forget .
  $ hg st -C
  A baz
  $ hg forget baz
  $ rm baz

Test unmarking copy of a directory

  $ mkdir dir
  $ echo foo > dir/foo
  $ echo bar > dir/bar
  $ hg add dir
  adding dir/bar
  adding dir/foo
  $ hg ci -m 'add dir/'
  $ hg cp dir dir2
  copying dir/bar to dir2/bar
  copying dir/foo to dir2/foo
  $ touch dir2/untracked
  $ hg copy --forget dir2
  $ hg st -C
  A dir2/bar
  A dir2/foo
  ? dir2/untracked
# Clean up for next test
  $ hg forget dir2
  removing dir2/bar
  removing dir2/foo
  $ rm -r dir2

Test uncopy on committed copies

# Commit some copies
  $ hg cp bar baz
  $ hg cp bar qux
  $ hg ci -m copies
  $ hg st -C --change .
  A baz
    bar
  A qux
    bar
  $ base=$(hg log -r '.^' -T '{rev}')
  $ hg log -G -T '{rev}:{node|short} {desc}\n' -r $base:
  @  5:a612dc2edfda copies
  |
  o  4:4800b1f1f38e add dir/
  |
  ~
# Add a dirty change on top to show that it's unaffected
  $ echo dirty >> baz
  $ hg st
  M baz
  $ cat baz
  bleah
  dirty
  $ hg copy --forget --at-rev . baz
  saved backup bundle to $TESTTMP/part2/.hg/strip-backup/a612dc2edfda-e36b4448-uncopy.hg
# The unwanted copy is no longer recorded, but the unrelated one is
  $ hg st -C --change .
  A baz
  A qux
    bar
# The old commit is gone and we have updated to the new commit
  $ hg log -G -T '{rev}:{node|short} {desc}\n' -r $base:
  @  5:c45090e5effe copies
  |
  o  4:4800b1f1f38e add dir/
  |
  ~
# Working copy still has the uncommitted change
  $ hg st
  M baz
  $ cat baz
  bleah
  dirty

  $ cd ..