tests/test-treediscovery.t

revert: add an XXX about rename tracking

We check for rename information in the dirstate. This is probably not enough to
preserve this behavior when using an explicit target rev.

I just spotted this while working on this code, but this is outside the scope
of my series so I'm just adding a comment to highlight this suspicious
situation.

#require killdaemons

Tests discovery against servers without getbundle support:

  $ CAP=getbundle
  $ . "$TESTDIR/notcapable"
  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > logtemplate="{rev} {node|short}: {desc} {branches}\n"
  > EOF

Setup HTTP server control:

  $ remote=http://localhost:$HGPORT/
  $ export remote
  $ tstart() {
  >   echo '[web]' > $1/.hg/hgrc
  >   echo 'push_ssl = false' >> $1/.hg/hgrc
  >   echo 'allow_push = *' >> $1/.hg/hgrc
  >   hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -A access.log -E errors.log
  >   cat hg.pid >> $DAEMON_PIDS
  > }
  $ tstop() {
  >   "$TESTDIR/killdaemons.py" $DAEMON_PIDS
  >   [ "$1" ] && cut -d' ' -f6- access.log && cat errors.log
  >   rm access.log errors.log
  > }

Both are empty:

  $ hg init empty1
  $ hg init empty2
  $ tstart empty2
  $ hg incoming -R empty1 $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg outgoing -R empty1 $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg pull -R empty1 $remote
  pulling from http://localhost:$HGPORT/
  no changes found
  $ hg push -R empty1 $remote
  pushing to http://localhost:$HGPORT/
  no changes found
  [1]
  $ tstop

Base repo:

  $ hg init main
  $ cd main
  $ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip'
  $ hg log -G
  o  11 a19bfa7e7328: r11 both
  |
  o  10 8b6bad1512e1: r10 both
  |
  o    9 025829e08038: r9 both
  |\
  | o  8 d8f638ac69e9: r8 name2
  | |
  | o  7 b6b4d315a2ac: r7 name2
  | |
  | o  6 6c6f5d5f3c11: r6 name2
  | |
  | o  5 70314b29987d: r5 name2
  | |
  o |  4 e71dbbc70e03: r4 name1
  | |
  o |  3 2c8d5d5ec612: r3 name1
  | |
  o |  2 a7892891da29: r2 name1
  |/
  o  1 0019a3b924fd: r1
  |
  o  0 d57206cc072a: r0
  
  $ cd ..
  $ tstart main

Full clone:

  $ hg clone main full
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd full
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Local is empty:

  $ cd empty1
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  0 d57206cc072a: r0 
  1 0019a3b924fd: r1 
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  5 70314b29987d: r5 name2
  6 6c6f5d5f3c11: r6 name2
  7 b6b4d315a2ac: r7 name2
  8 d8f638ac69e9: r8 name2
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 12 changesets with 24 changes to 2 files
  (run 'hg update' to get a working copy)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Local is subset:

  $ hg clone main subset --rev name2 ; cd subset
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  updating to branch name2
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  (run 'hg update' to get a working copy)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

Remote is empty:

  $ tstart empty2
  $ cd main
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  0 d57206cc072a: r0 
  1 0019a3b924fd: r1 
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  5 70314b29987d: r5 name2
  6 6c6f5d5f3c11: r6 name2
  7 b6b4d315a2ac: r7 name2
  8 d8f638ac69e9: r8 name2
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 12 changesets with 24 changes to 2 files
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

Local is superset:

  $ hg clone main subset2 --rev name2
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  updating to branch name2
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ tstart subset2
  $ cd main
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: push creates new remote branches: both, name1!
  (use 'hg push --new-branch' to create new remote branches)
  [255]
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 6 changesets with 12 changes to 2 files
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

Partial pull:

  $ tstart main
  $ hg clone $remote partial --rev name2
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  updating to branch name2
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd partial
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg incoming $remote --rev name1
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  $ hg pull $remote --rev name1
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 6 changes to 2 files (+1 heads)
  (run 'hg heads' to see heads)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ cd ..
  $ tstop

Both have new stuff in new named branches:

  $ hg clone main repo1a --rev name1 -q
  $ hg clone repo1a repo1b -q
  $ hg clone main repo2a --rev name2 -q
  $ hg clone repo2a repo2b -q
  $ tstart repo1a

  $ cd repo2a
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  2 70314b29987d: r5 name2
  3 6c6f5d5f3c11: r6 name2
  4 b6b4d315a2ac: r7 name2
  5 d8f638ac69e9: r8 name2
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 4 changesets with 8 changes to 2 files (+1 heads)
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 6 changes to 2 files (+1 heads)
  (run 'hg heads' to see heads)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

  $ tstart repo1b
  $ cd repo2b
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  2 70314b29987d: r5 name2
  3 6c6f5d5f3c11: r6 name2
  4 b6b4d315a2ac: r7 name2
  5 d8f638ac69e9: r8 name2
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 6 changes to 2 files (+1 heads)
  (run 'hg heads' to see heads)
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 4 changesets with 8 changes to 2 files (+1 heads)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

Both have new stuff in existing named branches:

  $ rm -r repo1a repo1b repo2a repo2b
  $ hg clone main repo1a --rev 3 --rev 8 -q
  $ hg clone repo1a repo1b -q
  $ hg clone main repo2a --rev 4 --rev 7 -q
  $ hg clone repo2a repo2b -q
  $ tstart repo1a

  $ cd repo2a
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  8 d8f638ac69e9: r8 name2
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  4 e71dbbc70e03: r4 name1
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 2 changes to 2 files
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 2 changes to 2 files
  (run 'hg update' to get a working copy)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

  $ tstart repo1b
  $ cd repo2b
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  8 d8f638ac69e9: r8 name2
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  4 e71dbbc70e03: r4 name1
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 2 changes to 2 files
  (run 'hg update' to get a working copy)
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 2 changes to 2 files
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop show
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 -
  "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961
  "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785
  "GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 -
  "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961
  "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "GET /?cmd=heads HTTP/1.1" 200 -
  "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961
  "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785
  "GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961+2c8d5d5ec612be65cdfdeac78b7662ab1696324a
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 -
  "GET /?cmd=branchmap HTTP/1.1" 200 -
  "GET /?cmd=branchmap HTTP/1.1" 200 -
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+1827a5bb63e602382eb89dd58f2ac9f3b007ad91
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 -
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 -