annotate tests/test-run-tests.t @ 45125:f55099982bc5

absorb: make it explicit if empty changeset was created

If the config rewrite.empty-successor=skip is set, a message "became empty and
was dropped" is shown if the changeset became empty. If the config
rewrite.empty-successor=keep is set, absorb may create changesets even if they
became empty. It’s probably a good idea to make that explicit. Therefore the
message is changed to be a combination of both: "became empty and became ...".

Repeating the word "became" is not very elegant. This results from the fact
that "became" was and is overloaded to indicate both the change from non-empty
to empty and the successor relation. In the combinated message, both meanings
are used in one sentence.

This file tests the behavior of run-tests.py itself.

Avoid interference from actual test env:

  $ . "$TESTDIR/helper-runtests.sh"

Smoke test with install
============
  $ "$PYTHON" $TESTDIR/run-tests.py $HGTEST_RUN_TESTS_PURE -l
  running 0 tests using 0 parallel processes 
  
  # Ran 0 tests, 0 skipped, 0 failed.

Define a helper to avoid the install step
=============
  $ rt()
  > {
  >     "$PYTHON" $TESTDIR/run-tests.py --with-hg=`which hg` -j1 "$@"
  > }

error paths

#if symlink
  $ ln -s `which true` hg
  $ "$PYTHON" $TESTDIR/run-tests.py --with-hg=./hg
  warning: --with-hg should specify an hg script
  running 0 tests using 0 parallel processes 
  
  # Ran 0 tests, 0 skipped, 0 failed.
  $ rm hg
#endif

#if execbit
  $ touch hg
  $ "$PYTHON" $TESTDIR/run-tests.py --with-hg=./hg
  usage: run-tests.py [options] [tests]
  run-tests.py: error: --with-hg must specify an executable hg script
  [2]
  $ rm hg
#endif

Features for testing optional lines
===================================

  $ cat > hghaveaddon.py <<EOF
  > import hghave
  > @hghave.check("custom", "custom hghave feature")
  > def has_custom():
  >     return True
  > @hghave.check("missing", "missing hghave feature")
  > def has_missing():
  >     return False
  > EOF

an empty test
=======================

  $ touch test-empty.t
  $ rt
  running 1 tests using 1 parallel processes 
  .
  # Ran 1 tests, 0 skipped, 0 failed.
  $ rm test-empty.t

a succesful test
=======================

  $ cat > test-success.t << EOF
  >   $ echo babar
  >   babar
  >   $ echo xyzzy
  >   dont_print (?)
  >   nothing[42]line (re) (?)
  >   never*happens (glob) (?)
  >   more_nothing (?)
  >   xyzzy
  >   nor this (?)
  >   $ printf 'abc\ndef\nxyz\n'
  >   123 (?)
  >   abc
  >   def (?)
  >   456 (?)
  >   xyz
  >   $ printf 'zyx\nwvu\ntsr\n'
  >   abc (?)
  >   zyx (custom !)
  >   wvu
  >   no_print (no-custom !)
  >   tsr (no-missing !)
  >   missing (missing !)
  > EOF

  $ rt
  running 1 tests using 1 parallel processes 
  .
  # Ran 1 tests, 0 skipped, 0 failed.

failing test
==================

test churn with globs
  $ cat > test-failure.t <<EOF
  >   $ echo "bar-baz"; echo "bar-bad"; echo foo
  >   bar*bad (glob)
  >   bar*baz (glob)
  >   | fo (re)
  > EOF
  $ rt test-failure.t
  running 1 tests using 1 parallel processes 
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo "bar-baz"; echo "bar-bad"; echo foo
  +  bar*baz (glob)
     bar*bad (glob)
  -  bar*baz (glob)
  -  | fo (re)
  +  foo
  
  ERROR: test-failure.t output changed
  !
  Failed test-failure.t: output changed
  # Ran 1 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

test how multiple globs gets matched with lines in output
  $ cat > test-failure-globs.t <<EOF
  >   $ echo "context"; echo "context"; \
  >     echo "key: 1"; echo "value: not a"; \
  >     echo "key: 2"; echo "value: not b"; \
  >     echo "key: 3"; echo "value: c"; \
  >     echo "key: 4"; echo "value: d"
  >   context
  >   context
  >   key: 1
  >   value: a
  >   key: 2
  >   value: b
  >   key: 3
  >   value: * (glob)
  >   key: 4
  >   value: * (glob)
  > EOF
  $ rt test-failure-globs.t
  running 1 tests using 1 parallel processes 
  
  --- $TESTTMP/test-failure-globs.t
  +++ $TESTTMP/test-failure-globs.t.err
  @@ -2,9 +2,9 @@
     context
     context
     key: 1
  -  value: a
  +  value: not a
     key: 2
  -  value: b
  +  value: not b
     key: 3
     value: * (glob)
     key: 4
  
  ERROR: test-failure-globs.t output changed
  !
  Failed test-failure-globs.t: output changed
  # Ran 1 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]
  $ rm test-failure-globs.t

test diff colorisation

#if no-windows pygments
  $ rt test-failure.t --color always
  running 1 tests using 1 parallel processes 
  
  \x1b[38;5;124m--- $TESTTMP/test-failure.t\x1b[39m (esc)
  \x1b[38;5;34m+++ $TESTTMP/test-failure.t.err\x1b[39m (esc)
  \x1b[38;5;90;01m@@ -1,4 +1,4 @@\x1b[39;00m (esc)
     $ echo "bar-baz"; echo "bar-bad"; echo foo
  \x1b[38;5;34m+  bar*baz (glob)\x1b[39m (esc)
     bar*bad (glob)
  \x1b[38;5;124m-  bar*baz (glob)\x1b[39m (esc)
  \x1b[38;5;124m-  | fo (re)\x1b[39m (esc)
  \x1b[38;5;34m+  foo\x1b[39m (esc)
  
  \x1b[38;5;88mERROR: \x1b[39m\x1b[38;5;9mtest-failure.t\x1b[39m\x1b[38;5;88m output changed\x1b[39m (esc)
  !
  \x1b[38;5;88mFailed \x1b[39m\x1b[38;5;9mtest-failure.t\x1b[39m\x1b[38;5;88m: output changed\x1b[39m (esc)
  # Ran 1 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

  $ rt test-failure.t 2> tmp.log
  running 1 tests using 1 parallel processes 
  [1]
  $ cat tmp.log
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo "bar-baz"; echo "bar-bad"; echo foo
  +  bar*baz (glob)
     bar*bad (glob)
  -  bar*baz (glob)
  -  | fo (re)
  +  foo
  
  ERROR: test-failure.t output changed
  !
  Failed test-failure.t: output changed
  # Ran 1 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
#endif

  $ cat > test-failure.t << EOF
  >   $ true
  >   should go away (true !)
  >   $ true
  >   should stay (false !)
  > 
  > Should remove first line, not second or third
  >   $ echo 'testing'
  >   baz*foo (glob) (true !)
  >   foobar*foo (glob) (false !)
  >   te*ting (glob) (true !)
  > 
  > Should keep first two lines, remove third and last
  >   $ echo 'testing'
  >   test.ng (re) (true !)
  >   foo.ar (re) (false !)
  >   b.r (re) (true !)
  >   missing (?)
  >   awol (true !)
  > 
  > The "missing" line should stay, even though awol is dropped
  >   $ echo 'testing'
  >   test.ng (re) (true !)
  >   foo.ar (?)
  >   awol
  >   missing (?)
  > EOF
  $ rt test-failure.t
  running 1 tests using 1 parallel processes 
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,11 +1,9 @@
     $ true
  -  should go away (true !)
     $ true
     should stay (false !)
   
   Should remove first line, not second or third
     $ echo 'testing'
  -  baz*foo (glob) (true !)
     foobar*foo (glob) (false !)
     te*ting (glob) (true !)
   
     foo.ar (re) (false !)
     missing (?)
  @@ -13,13 +11,10 @@
     $ echo 'testing'
     test.ng (re) (true !)
     foo.ar (re) (false !)
  -  b.r (re) (true !)
     missing (?)
  -  awol (true !)
   
   The "missing" line should stay, even though awol is dropped
     $ echo 'testing'
     test.ng (re) (true !)
     foo.ar (?)
  -  awol
     missing (?)
  
  ERROR: test-failure.t output changed
  !
  Failed test-failure.t: output changed
  # Ran 1 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

basic failing test
  $ cat > test-failure.t << EOF
  >   $ echo babar
  >   rataxes
  > This is a noop statement so that
  > this test is still more bytes than success.
  > pad pad pad pad............................................................
  > pad pad pad pad............................................................
  > pad pad pad pad............................................................
  > pad pad pad pad............................................................
  > pad pad pad pad............................................................
  > pad pad pad pad............................................................
  > EOF

  >>> fh = open('test-failure-unicode.t', 'wb')
  >>> fh.write(u'  $ echo babar\u03b1\n'.encode('utf-8')) and None
  >>> fh.write(u'  l\u03b5\u03b5t\n'.encode('utf-8')) and None

  $ rt
  running 3 tests using 1 parallel processes 
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  ERROR: test-failure.t output changed
  !.
  --- $TESTTMP/test-failure-unicode.t
  +++ $TESTTMP/test-failure-unicode.t.err
  @@ -1,2 +1,2 @@
     $ echo babar\xce\xb1 (esc)
  -  l\xce\xb5\xce\xb5t (esc)
  +  babar\xce\xb1 (esc)
  
  ERROR: test-failure-unicode.t output changed
  !
  Failed test-failure-unicode.t: output changed
  Failed test-failure.t: output changed
  # Ran 3 tests, 0 skipped, 2 failed.
  python hash seed: * (glob)
  [1]

test --outputdir
  $ mkdir output
  $ rt --outputdir output
  running 3 tests using 1 parallel processes 
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/output/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  ERROR: test-failure.t output changed
  !.
  --- $TESTTMP/test-failure-unicode.t
  +++ $TESTTMP/output/test-failure-unicode.t.err
  @@ -1,2 +1,2 @@
     $ echo babar\xce\xb1 (esc)
  -  l\xce\xb5\xce\xb5t (esc)
  +  babar\xce\xb1 (esc)
  
  ERROR: test-failure-unicode.t output changed
  !
  Failed test-failure-unicode.t: output changed
  Failed test-failure.t: output changed
  # Ran 3 tests, 0 skipped, 2 failed.
  python hash seed: * (glob)
  [1]
  $ ls -a output
  .
  ..
  .testtimes
  test-failure-unicode.t.err
  test-failure.t.err

test --xunit support
  $ rt --xunit=xunit.xml
  running 3 tests using 1 parallel processes 
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  ERROR: test-failure.t output changed
  !.
  --- $TESTTMP/test-failure-unicode.t
  +++ $TESTTMP/test-failure-unicode.t.err
  @@ -1,2 +1,2 @@
     $ echo babar\xce\xb1 (esc)
  -  l\xce\xb5\xce\xb5t (esc)
  +  babar\xce\xb1 (esc)
  
  ERROR: test-failure-unicode.t output changed
  !
  Failed test-failure-unicode.t: output changed
  Failed test-failure.t: output changed
  # Ran 3 tests, 0 skipped, 2 failed.
  python hash seed: * (glob)
  [1]
  $ cat xunit.xml
  <?xml version="1.0" encoding="utf-8"?>
  <testsuite errors="0" failures="2" name="run-tests" skipped="0" tests="3">
    <testcase name="test-success.t" time="*"/> (glob)
    <testcase name="test-failure-unicode.t" time="*"> (glob)
      <failure message="output changed" type="output-mismatch"><![CDATA[--- $TESTTMP/test-failure-unicode.t (py38 !)
      <failure message="output changed" type="output-mismatch"> (no-py38 !)
  <![CDATA[--- $TESTTMP/test-failure-unicode.t (no-py38 !)
  +++ $TESTTMP/test-failure-unicode.t.err
  @@ -1,2 +1,2 @@
     $ echo babar\xce\xb1 (esc)
  -  l\xce\xb5\xce\xb5t (esc)
  +  babar\xce\xb1 (esc)
  ]]></failure> (py38 !)
  ]]>    </failure> (no-py38 !)
    </testcase>
    <testcase name="test-failure.t" time="*"> (glob)
      <failure message="output changed" type="output-mismatch"><![CDATA[--- $TESTTMP/test-failure.t (py38 !)
      <failure message="output changed" type="output-mismatch"> (no-py38 !)
  <![CDATA[--- $TESTTMP/test-failure.t (no-py38 !)
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  ]]></failure> (py38 !)
  ]]>    </failure> (no-py38 !)
    </testcase>
  </testsuite>

  $ cat .testtimes
  test-empty.t * (glob)
  test-failure-globs.t * (glob)
  test-failure-unicode.t * (glob)
  test-failure.t * (glob)
  test-success.t * (glob)

  $ rt --list-tests
  test-failure-unicode.t
  test-failure.t
  test-success.t

  $ rt --list-tests --json
  test-failure-unicode.t
  test-failure.t
  test-success.t
  $ cat report.json
  testreport ={
      "test-failure-unicode.t": {
          "result": "success"
      },
      "test-failure.t": {
          "result": "success"
      },
      "test-success.t": {
          "result": "success"
      }
  } (no-eol)

  $ rt --list-tests --xunit=xunit.xml
  test-failure-unicode.t
  test-failure.t
  test-success.t
  $ cat xunit.xml
  <?xml version="1.0" encoding="utf-8"?>
  <testsuite errors="0" failures="0" name="run-tests" skipped="0" tests="0">
    <testcase name="test-failure-unicode.t"/>
    <testcase name="test-failure.t"/>
    <testcase name="test-success.t"/>
  </testsuite>

  $ rt --list-tests test-failure* --json --xunit=xunit.xml --outputdir output
  test-failure-unicode.t
  test-failure.t
  $ cat output/report.json
  testreport ={
      "test-failure-unicode.t": {
          "result": "success"
      },
      "test-failure.t": {
          "result": "success"
      }
  } (no-eol)
  $ cat xunit.xml
  <?xml version="1.0" encoding="utf-8"?>
  <testsuite errors="0" failures="0" name="run-tests" skipped="0" tests="0">
    <testcase name="test-failure-unicode.t"/>
    <testcase name="test-failure.t"/>
  </testsuite>

  $ rm test-failure-unicode.t

test for --retest
====================

  $ rt --retest
  running 2 tests using 1 parallel processes 
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  ERROR: test-failure.t output changed
  !
  Failed test-failure.t: output changed
  # Ran 2 tests, 1 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

--retest works with --outputdir
  $ rm -r output
  $ mkdir output
  $ mv test-failure.t.err output
  $ rt --retest --outputdir output
  running 2 tests using 1 parallel processes 
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/output/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  ERROR: test-failure.t output changed
  !
  Failed test-failure.t: output changed
  # Ran 2 tests, 1 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

Selecting Tests To Run
======================

successful

  $ rt test-success.t
  running 1 tests using 1 parallel processes 
  .
  # Ran 1 tests, 0 skipped, 0 failed.

success w/ keyword
  $ rt -k xyzzy
  running 2 tests using 1 parallel processes 
  .
  # Ran 2 tests, 1 skipped, 0 failed.

failed

  $ rt test-failure.t
  running 1 tests using 1 parallel processes 
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  ERROR: test-failure.t output changed
  !
  Failed test-failure.t: output changed
  # Ran 1 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

failure w/ keyword
  $ rt -k rataxes
  running 2 tests using 1 parallel processes 
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  ERROR: test-failure.t output changed
  !
  Failed test-failure.t: output changed
  # Ran 2 tests, 1 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

Verify that when a process fails to start we show a useful message
==================================================================

  $ cat > test-serve-fail.t <<EOF
  >   $ echo 'abort: child process failed to start blah'
  > EOF
  $ rt test-serve-fail.t
  running 1 tests using 1 parallel processes 
  
  --- $TESTTMP/test-serve-fail.t
  +++ $TESTTMP/test-serve-fail.t.err
  @@ -1* +1,2 @@ (glob)
     $ echo 'abort: child process failed to start blah'
  +  abort: child process failed to start blah
  
  ERROR: test-serve-fail.t output changed
  !
  Failed test-serve-fail.t: server failed to start (HGPORT=*) (glob)
  # Ran 1 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]
  $ rm test-serve-fail.t

Verify that we can try other ports
===================================

Extensions aren't inherited by the invoked run-tests.py. An extension
introducing a repository requirement could cause this to fail. So we force
HGRCPATH to get a clean environment.

  $ HGRCPATH= hg init inuse
  $ hg serve -R inuse -p $HGPORT -d --pid-file=blocks.pid
  $ cat blocks.pid >> $DAEMON_PIDS
  $ cat > test-serve-inuse.t <<EOF
  >   $ hg serve -R `pwd`/inuse -p \$HGPORT -d --pid-file=hg.pid
  >   $ cat hg.pid >> \$DAEMON_PIDS
  > EOF
  $ rt test-serve-inuse.t
  running 1 tests using 1 parallel processes 
  .
  # Ran 1 tests, 0 skipped, 0 failed.
  $ rm test-serve-inuse.t
  $ killdaemons.py $DAEMON_PIDS

Running In Debug Mode
======================

  $ rt --debug 2>&1 | grep -v pwd
  running 2 tests using 1 parallel processes 
  + alias hg=hg.exe (windows !)
  + echo *SALT* 0 0 (glob)
  *SALT* 0 0 (glob)
  + echo babar
  babar
  + echo *SALT* 10 0 (glob)
  *SALT* 10 0 (glob)
  .+ alias hg=hg.exe (windows !)
  *+ echo *SALT* 0 0 (glob)
  *SALT* 0 0 (glob)
  + echo babar
  babar
  + echo *SALT* 2 0 (glob)
  *SALT* 2 0 (glob)
  + echo xyzzy
  xyzzy
  + echo *SALT* 9 0 (glob)
  *SALT* 9 0 (glob)
  + printf *abc\ndef\nxyz\n* (glob)
  abc
  def
  xyz
  + echo *SALT* 15 0 (glob)
  *SALT* 15 0 (glob)
  + printf *zyx\nwvu\ntsr\n* (glob)
  zyx
  wvu
  tsr
  + echo *SALT* 22 0 (glob)
  *SALT* 22 0 (glob)
  .
  # Ran 2 tests, 0 skipped, 0 failed.

Parallel runs
==============

(duplicate the failing test to get predictable output)
  $ cp test-failure.t test-failure-copy.t

  $ rt --jobs 2 test-failure*.t -n
  running 2 tests using 2 parallel processes 
  !!
  Failed test-failure*.t: output changed (glob)
  Failed test-failure*.t: output changed (glob)
  # Ran 2 tests, 0 skipped, 2 failed.
  python hash seed: * (glob)
  [1]

failures in parallel with --first should only print one failure
  $ rt --jobs 2 --first test-failure*.t
  running 2 tests using 2 parallel processes 
  
  --- $TESTTMP/test-failure*.t (glob)
  +++ $TESTTMP/test-failure*.t.err (glob)
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  Failed test-failure*.t: output changed (glob)
  Failed test-failure*.t: output changed (glob)
  # Ran 2 tests, 0 skipped, 2 failed.
  python hash seed: * (glob)
  [1]


(delete the duplicated test file)
  $ rm test-failure-copy.t

multiple runs per test should be parallelized

  $ rt --jobs 2 --runs-per-test 2 test-success.t
  running 2 tests using 2 parallel processes 
  ..
  # Ran 2 tests, 0 skipped, 0 failed.

Interactive run
===============

(backup the failing test)
  $ cp test-failure.t backup

Refuse the fix

  $ echo 'n' | rt -i
  running 2 tests using 1 parallel processes 
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  Accept this change? [y/N] 
  ERROR: test-failure.t output changed
  !.
  Failed test-failure.t: output changed
  # Ran 2 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

  $ cat test-failure.t
    $ echo babar
    rataxes
  This is a noop statement so that
  this test is still more bytes than success.
  pad pad pad pad............................................................
  pad pad pad pad............................................................
  pad pad pad pad............................................................
  pad pad pad pad............................................................
  pad pad pad pad............................................................
  pad pad pad pad............................................................

Interactive with custom view

  $ echo 'n' | rt -i --view echo
  running 2 tests using 1 parallel processes 
  $TESTTMP/test-failure.t $TESTTMP/test-failure.t.err
  Accept this change? [y/N]* (glob)
  ERROR: test-failure.t output changed
  !.
  Failed test-failure.t: output changed
  # Ran 2 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

View the fix

  $ echo 'y' | rt --view echo
  running 2 tests using 1 parallel processes 
  $TESTTMP/test-failure.t $TESTTMP/test-failure.t.err
  
  ERROR: test-failure.t output changed
  !.
  Failed test-failure.t: output changed
  # Ran 2 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

Accept the fix

  $ cat >> test-failure.t <<EOF
  >   $ echo 'saved backup bundle to \$TESTTMP/foo.hg'
  >   saved backup bundle to \$TESTTMP/foo.hg
  >   $ echo 'saved backup bundle to \$TESTTMP/foo.hg'
  >   saved backup bundle to $TESTTMP\\foo.hg
  >   $ echo 'saved backup bundle to \$TESTTMP/foo.hg'
  >   saved backup bundle to \$TESTTMP/*.hg (glob)
  > EOF
  $ echo 'y' | rt -i 2>&1
  running 2 tests using 1 parallel processes 
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  @@ -11,6 +11,6 @@
     $ echo 'saved backup bundle to $TESTTMP/foo.hg'
     saved backup bundle to $TESTTMP/foo.hg
     $ echo 'saved backup bundle to $TESTTMP/foo.hg'
  -  saved backup bundle to $TESTTMP\foo.hg
  +  saved backup bundle to $TESTTMP/foo.hg
     $ echo 'saved backup bundle to $TESTTMP/foo.hg'
     saved backup bundle to $TESTTMP/*.hg (glob)
  Accept this change? [y/N] ..
  # Ran 2 tests, 0 skipped, 0 failed.

  $ sed -e 's,(glob)$,&<,g' test-failure.t
    $ echo babar
    babar
  This is a noop statement so that
  this test is still more bytes than success.
  pad pad pad pad............................................................
  pad pad pad pad............................................................
  pad pad pad pad............................................................
  pad pad pad pad............................................................
  pad pad pad pad............................................................
  pad pad pad pad............................................................
    $ echo 'saved backup bundle to $TESTTMP/foo.hg'
    saved backup bundle to $TESTTMP/foo.hg
    $ echo 'saved backup bundle to $TESTTMP/foo.hg'
    saved backup bundle to $TESTTMP/foo.hg
    $ echo 'saved backup bundle to $TESTTMP/foo.hg'
    saved backup bundle to $TESTTMP/*.hg (glob)<

Race condition - test file was modified when test is running

  $ TESTRACEDIR=`pwd`
  $ export TESTRACEDIR
  $ cat > test-race.t <<EOF
  >   $ echo 1
  >   $ echo "# a new line" >> $TESTRACEDIR/test-race.t
  > EOF

  $ rt -i test-race.t
  running 1 tests using 1 parallel processes 
  
  --- $TESTTMP/test-race.t
  +++ $TESTTMP/test-race.t.err
  @@ -1,2 +1,3 @@
     $ echo 1
  +  1
     $ echo "# a new line" >> $TESTTMP/test-race.t
  Reference output has changed (run again to prompt changes)
  ERROR: test-race.t output changed
  !
  Failed test-race.t: output changed
  # Ran 1 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

  $ rm test-race.t

When "#testcases" is used in .t files

  $ cat >> test-cases.t <<EOF
  > #testcases a b
  > #if a
  >   $ echo 1
  > #endif
  > #if b
  >   $ echo 2
  > #endif
  > EOF

  $ cat <<EOF | rt -i test-cases.t 2>&1
  > y
  > y
  > EOF
  running 2 tests using 1 parallel processes 
  
  --- $TESTTMP/test-cases.t
  +++ $TESTTMP/test-cases.t#a.err
  @@ -1,6 +1,7 @@
   #testcases a b
   #if a
     $ echo 1
  +  1
   #endif
   #if b
     $ echo 2
  Accept this change? [y/N] .
  --- $TESTTMP/test-cases.t
  +++ $TESTTMP/test-cases.t#b.err
  @@ -5,4 +5,5 @@
   #endif
   #if b
     $ echo 2
  +  2
   #endif
  Accept this change? [y/N] .
  # Ran 2 tests, 0 skipped, 0 failed.

  $ cat test-cases.t
  #testcases a b
  #if a
    $ echo 1
    1
  #endif
  #if b
    $ echo 2
    2
  #endif

  $ cat >> test-cases.t <<'EOF'
  > #if a
  >   $ NAME=A
  > #else
  >   $ NAME=B
  > #endif
  >   $ echo $NAME
  >   A (a !)
  >   B (b !)
  > EOF
  $ rt test-cases.t
  running 2 tests using 1 parallel processes 
  ..
  # Ran 2 tests, 0 skipped, 0 failed.

When using multiple dimensions of "#testcases" in .t files

  $ cat > test-cases.t <<'EOF'
  > #testcases a b
  > #testcases c d
  > #if a d
  >   $ echo $TESTCASE
  >   a#d
  > #endif
  > #if b c
  >   $ echo yes
  >   no
  > #endif
  > EOF
  $ rt test-cases.t
  running 4 tests using 1 parallel processes 
  ..
  --- $TESTTMP/test-cases.t
  +++ $TESTTMP/test-cases.t#b#c.err
  @@ -6,5 +6,5 @@
   #endif
   #if b c
     $ echo yes
  -  no
  +  yes
   #endif
  
  ERROR: test-cases.t#b#c output changed
  !.
  Failed test-cases.t#b#c: output changed
  # Ran 4 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

  $ rm test-cases.t#b#c.err
  $ rm test-cases.t

(reinstall)
  $ mv backup test-failure.t

No Diff
===============

  $ rt --nodiff
  running 2 tests using 1 parallel processes 
  !.
  Failed test-failure.t: output changed
  # Ran 2 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

test --tmpdir support
  $ rt --tmpdir=$TESTTMP/keep test-success.t
  running 1 tests using 1 parallel processes 
  
  Keeping testtmp dir: $TESTTMP/keep/child1/test-success.t
  Keeping threadtmp dir: $TESTTMP/keep/child1 
  .
  # Ran 1 tests, 0 skipped, 0 failed.

timeouts
========
  $ cat > test-timeout.t <<EOF
  >   $ sleep 2
  >   $ echo pass
  >   pass
  > EOF
  > echo '#require slow' > test-slow-timeout.t
  > cat test-timeout.t >> test-slow-timeout.t
  $ rt --timeout=1 --slowtimeout=3 test-timeout.t test-slow-timeout.t
  running 2 tests using 1 parallel processes 
  st
  Skipped test-slow-timeout.t: missing feature: allow slow tests (use --allow-slow-tests)
  Failed test-timeout.t: timed out
  # Ran 1 tests, 1 skipped, 1 failed.
  python hash seed: * (glob)
  [1]
  $ rt --timeout=1 --slowtimeout=3 \
  > test-timeout.t test-slow-timeout.t --allow-slow-tests
  running 2 tests using 1 parallel processes 
  .t
  Failed test-timeout.t: timed out
  # Ran 2 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]
  $ rm test-timeout.t test-slow-timeout.t

test for --time
==================

  $ rt test-success.t --time
  running 1 tests using 1 parallel processes 
  .
  # Ran 1 tests, 0 skipped, 0 failed.
  # Producing time report
  start   end     cuser   csys    real      Test
  \s*[\d\.]{5,8} \s*[\d\.]{5,8} \s*[\d\.]{5,8} \s*[\d\.]{5,8} \s*[\d\.]{5,8}   test-success.t (re)

test for --time with --job enabled
====================================

  $ rt test-success.t --time --jobs 2
  running 1 tests using 1 parallel processes 
  .
  # Ran 1 tests, 0 skipped, 0 failed.
  # Producing time report
  start   end     cuser   csys    real      Test
  \s*[\d\.]{5,8} \s*[\d\.]{5,8} \s*[\d\.]{5,8} \s*[\d\.]{5,8} \s*[\d\.]{5,8}   test-success.t (re)

Skips
================
  $ cat > test-skip.t <<EOF
  >   $ echo xyzzy
  > #if true
  > #require false
  > #end
  > EOF
  $ cat > test-noskip.t <<EOF
  > #if false
  > #require false
  > #endif
  > EOF
  $ rt --nodiff
  running 4 tests using 1 parallel processes 
  !.s.
  Skipped test-skip.t: missing feature: nail clipper
  Failed test-failure.t: output changed
  # Ran 3 tests, 1 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

  $ rm test-noskip.t
  $ rt --keyword xyzzy
  running 3 tests using 1 parallel processes 
  .s
  Skipped test-skip.t: missing feature: nail clipper
  # Ran 2 tests, 2 skipped, 0 failed.

Skips with xml
  $ rt --keyword xyzzy \
  >  --xunit=xunit.xml
  running 3 tests using 1 parallel processes 
  .s
  Skipped test-skip.t: missing feature: nail clipper
  # Ran 2 tests, 2 skipped, 0 failed.
  $ cat xunit.xml
  <?xml version="1.0" encoding="utf-8"?>
  <testsuite errors="0" failures="0" name="run-tests" skipped="2" tests="2">
    <testcase name="test-success.t" time="*"/> (glob)
    <testcase name="test-skip.t">
      <skipped><![CDATA[missing feature: nail clipper]]></skipped> (py38 !)
      <skipped> (no-py38 !)
  <![CDATA[missing feature: nail clipper]]>    </skipped> (no-py38 !)
    </testcase>
  </testsuite>

Missing skips or blacklisted skips don't count as executed:
  $ echo test-failure.t > blacklist
  $ rt --blacklist=blacklist --json\
  >   test-failure.t test-bogus.t
  running 2 tests using 1 parallel processes 
  ss
  Skipped test-bogus.t: Doesn't exist
  Skipped test-failure.t: blacklisted
  # Ran 0 tests, 2 skipped, 0 failed.
  $ cat report.json
  testreport ={
      "test-bogus.t": {
          "result": "skip"
      },
      "test-failure.t": {
          "result": "skip"
      }
  } (no-eol)

Whitelist trumps blacklist
  $ echo test-failure.t > whitelist
  $ rt --blacklist=blacklist --whitelist=whitelist --json\
  >   test-failure.t test-bogus.t
  running 2 tests using 1 parallel processes 
  s
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  ERROR: test-failure.t output changed
  !
  Skipped test-bogus.t: Doesn't exist
  Failed test-failure.t: output changed
  # Ran 1 tests, 1 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

Ensure that --test-list causes only the tests listed in that file to
be executed.
  $ echo test-success.t >> onlytest
  $ rt --test-list=onlytest
  running 1 tests using 1 parallel processes 
  .
  # Ran 1 tests, 0 skipped, 0 failed.
  $ echo test-bogus.t >> anothertest
  $ rt --test-list=onlytest --test-list=anothertest
  running 2 tests using 1 parallel processes 
  s.
  Skipped test-bogus.t: Doesn't exist
  # Ran 1 tests, 1 skipped, 0 failed.
  $ rm onlytest anothertest

test for --json
==================

  $ rt --json
  running 3 tests using 1 parallel processes 
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  ERROR: test-failure.t output changed
  !.s
  Skipped test-skip.t: missing feature: nail clipper
  Failed test-failure.t: output changed
  # Ran 2 tests, 1 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

  $ cat report.json
  testreport ={
      "test-failure.t": [\{] (re)
          "csys": "\s*\d+\.\d{3,4}", ? (re)
          "cuser": "\s*\d+\.\d{3,4}", ? (re)
          "diff": "---.+\+\+\+.+", ? (re)
          "end": "\s*\d+\.\d{3,4}", ? (re)
          "result": "failure", ? (re)
          "start": "\s*\d+\.\d{3,4}", ? (re)
          "time": "\s*\d+\.\d{3,4}" (re)
      }, ? (re)
      "test-skip.t": {
          "csys": "\s*\d+\.\d{3,4}", ? (re)
          "cuser": "\s*\d+\.\d{3,4}", ? (re)
          "diff": "", ? (re)
          "end": "\s*\d+\.\d{3,4}", ? (re)
          "result": "skip", ? (re)
          "start": "\s*\d+\.\d{3,4}", ? (re)
          "time": "\s*\d+\.\d{3,4}" (re)
      }, ? (re)
      "test-success.t": [\{] (re)
          "csys": "\s*\d+\.\d{3,4}", ? (re)
          "cuser": "\s*\d+\.\d{3,4}", ? (re)
          "diff": "", ? (re)
          "end": "\s*\d+\.\d{3,4}", ? (re)
          "result": "success", ? (re)
          "start": "\s*\d+\.\d{3,4}", ? (re)
          "time": "\s*\d+\.\d{3,4}" (re)
      }
  } (no-eol)
--json with --outputdir

  $ rm report.json
  $ rm -r output
  $ mkdir output
  $ rt --json --outputdir output
  running 3 tests using 1 parallel processes 
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/output/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  
  ERROR: test-failure.t output changed
  !.s
  Skipped test-skip.t: missing feature: nail clipper
  Failed test-failure.t: output changed
  # Ran 2 tests, 1 skipped, 1 failed.
  python hash seed: * (glob)
  [1]
  $ f report.json
  report.json: file not found
  $ cat output/report.json
  testreport ={
      "test-failure.t": [\{] (re)
          "csys": "\s*\d+\.\d{3,4}", ? (re)
          "cuser": "\s*\d+\.\d{3,4}", ? (re)
          "diff": "---.+\+\+\+.+", ? (re)
          "end": "\s*\d+\.\d{3,4}", ? (re)
          "result": "failure", ? (re)
          "start": "\s*\d+\.\d{3,4}", ? (re)
          "time": "\s*\d+\.\d{3,4}" (re)
      }, ? (re)
      "test-skip.t": {
          "csys": "\s*\d+\.\d{3,4}", ? (re)
          "cuser": "\s*\d+\.\d{3,4}", ? (re)
          "diff": "", ? (re)
          "end": "\s*\d+\.\d{3,4}", ? (re)
          "result": "skip", ? (re)
          "start": "\s*\d+\.\d{3,4}", ? (re)
          "time": "\s*\d+\.\d{3,4}" (re)
      }, ? (re)
      "test-success.t": [\{] (re)
          "csys": "\s*\d+\.\d{3,4}", ? (re)
          "cuser": "\s*\d+\.\d{3,4}", ? (re)
          "diff": "", ? (re)
          "end": "\s*\d+\.\d{3,4}", ? (re)
          "result": "success", ? (re)
          "start": "\s*\d+\.\d{3,4}", ? (re)
          "time": "\s*\d+\.\d{3,4}" (re)
      }
  } (no-eol)
  $ ls -a output
  .
  ..
  .testtimes
  report.json
  test-failure.t.err

Test that failed test accepted through interactive are properly reported:

  $ cp test-failure.t backup
  $ echo y | rt --json -i
  running 3 tests using 1 parallel processes 
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,5 +1,5 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
   pad pad pad pad............................................................
  Accept this change? [y/N] ..s
  Skipped test-skip.t: missing feature: nail clipper
  # Ran 2 tests, 1 skipped, 0 failed.

  $ cat report.json
  testreport ={
      "test-failure.t": [\{] (re)
          "csys": "\s*\d+\.\d{3,4}", ? (re)
          "cuser": "\s*\d+\.\d{3,4}", ? (re)
          "diff": "", ? (re)
          "end": "\s*\d+\.\d{3,4}", ? (re)
          "result": "success", ? (re)
          "start": "\s*\d+\.\d{3,4}", ? (re)
          "time": "\s*\d+\.\d{3,4}" (re)
      }, ? (re)
      "test-skip.t": {
          "csys": "\s*\d+\.\d{3,4}", ? (re)
          "cuser": "\s*\d+\.\d{3,4}", ? (re)
          "diff": "", ? (re)
          "end": "\s*\d+\.\d{3,4}", ? (re)
          "result": "skip", ? (re)
          "start": "\s*\d+\.\d{3,4}", ? (re)
          "time": "\s*\d+\.\d{3,4}" (re)
      }, ? (re)
      "test-success.t": [\{] (re)
          "csys": "\s*\d+\.\d{3,4}", ? (re)
          "cuser": "\s*\d+\.\d{3,4}", ? (re)
          "diff": "", ? (re)
          "end": "\s*\d+\.\d{3,4}", ? (re)
          "result": "success", ? (re)
          "start": "\s*\d+\.\d{3,4}", ? (re)
          "time": "\s*\d+\.\d{3,4}" (re)
      }
  } (no-eol)
  $ mv backup test-failure.t

backslash on end of line with glob matching is handled properly

  $ cat > test-glob-backslash.t << EOF
  >   $ echo 'foo bar \\'
  >   foo * \ (glob)
  > EOF

  $ rt test-glob-backslash.t
  running 1 tests using 1 parallel processes 
  .
  # Ran 1 tests, 0 skipped, 0 failed.

  $ rm -f test-glob-backslash.t

Test globbing of local IP addresses
  $ echo 172.16.18.1
  $LOCALIP (glob)
  $ echo dead:beef::1
  $LOCALIP (glob)

Add support for external test formatter
=======================================

  $ CUSTOM_TEST_RESULT=basic_test_result "$PYTHON" $TESTDIR/run-tests.py --with-hg=`which hg` -j1 "$@" test-success.t test-failure.t
  running 2 tests using 1 parallel processes 
  
  # Ran 2 tests, 0 skipped, 0 failed.
  ON_START! <__main__.TestSuite tests=[<__main__.TTest testMethod=test-failure.t>, <__main__.TTest testMethod=test-success.t>]>
  FAILURE! test-failure.t output changed
  SUCCESS! test-success.t
  ON_END!

Test reusability for third party tools
======================================

  $ mkdir "$TESTTMP"/anothertests
  $ cd "$TESTTMP"/anothertests

test that `run-tests.py` can execute hghave, even if it runs not in
Mercurial source tree.

  $ cat > test-hghave.t <<EOF
  > #require true
  >   $ echo foo
  >   foo
  > EOF
  $ rt test-hghave.t
  running 1 tests using 1 parallel processes 
  .
  # Ran 1 tests, 0 skipped, 0 failed.

test that RUNTESTDIR refers the directory, in which `run-tests.py` now
running is placed.

  $ cat > test-runtestdir.t <<EOF
  > - $TESTDIR, in which test-run-tests.t is placed
  > - \$TESTDIR, in which test-runtestdir.t is placed (expanded at runtime)
  > - \$RUNTESTDIR, in which run-tests.py is placed (expanded at runtime)
  > 
  > #if windows
  >   $ test "\$TESTDIR" = "$TESTTMP\anothertests"
  > #else
  >   $ test "\$TESTDIR" = "$TESTTMP"/anothertests
  > #endif
  > If this prints a path, that means RUNTESTDIR didn't equal
  > TESTDIR as it should have.
  >   $ test "\$RUNTESTDIR" = "$TESTDIR" || echo "\$RUNTESTDIR"
  > This should print the start of check-code. If this passes but the
  > previous check failed, that means we found a copy of check-code at whatever
  > RUNTESTSDIR ended up containing, even though it doesn't match TESTDIR.
  >   $ head -n 3 "\$RUNTESTDIR"/../contrib/check-code.py | sed 's@.!.*python@#!USRBINENVPY@'
  >   #!USRBINENVPY
  >   #
  >   # check-code - a style and portability checker for Mercurial
  > EOF
  $ rt test-runtestdir.t
  running 1 tests using 1 parallel processes 
  .
  # Ran 1 tests, 0 skipped, 0 failed.

#if execbit

test that TESTDIR is referred in PATH

  $ cat > custom-command.sh <<EOF
  > #!/bin/sh
  > echo "hello world"
  > EOF
  $ chmod +x custom-command.sh
  $ cat > test-testdir-path.t <<EOF
  >   $ custom-command.sh
  >   hello world
  > EOF
  $ rt test-testdir-path.t
  running 1 tests using 1 parallel processes 
  .
  # Ran 1 tests, 0 skipped, 0 failed.

#endif

test support for --allow-slow-tests
  $ cat > test-very-slow-test.t <<EOF
  > #require slow
  >   $ echo pass
  >   pass
  > EOF
  $ rt test-very-slow-test.t
  running 1 tests using 1 parallel processes 
  s
  Skipped test-very-slow-test.t: missing feature: allow slow tests (use --allow-slow-tests)
  # Ran 0 tests, 1 skipped, 0 failed.
  $ rt $HGTEST_RUN_TESTS_PURE --allow-slow-tests test-very-slow-test.t
  running 1 tests using 1 parallel processes 
  .
  # Ran 1 tests, 0 skipped, 0 failed.

support for running a test outside the current directory
  $ mkdir nonlocal
  $ cat > nonlocal/test-is-not-here.t << EOF
  >   $ echo pass
  >   pass
  > EOF
  $ rt nonlocal/test-is-not-here.t
  running 1 tests using 1 parallel processes 
  .
  # Ran 1 tests, 0 skipped, 0 failed.

support for automatically discovering test if arg is a folder
  $ mkdir tmp && cd tmp

  $ cat > test-uno.t << EOF
  >   $ echo line
  >   line
  > EOF

  $ cp test-uno.t test-dos.t
  $ cd ..
  $ cp -R tmp tmpp
  $ cp tmp/test-uno.t test-solo.t

  $ rt tmp/ test-solo.t tmpp
  running 5 tests using 1 parallel processes 
  .....
  # Ran 5 tests, 0 skipped, 0 failed.
  $ rm -rf tmp tmpp

support for running run-tests.py from another directory
  $ mkdir tmp && cd tmp

  $ cat > useful-file.sh << EOF
  > important command
  > EOF

  $ cat > test-folder.t << EOF
  >   $ cat \$TESTDIR/useful-file.sh
  >   important command
  > EOF

  $ cat > test-folder-fail.t << EOF
  >   $ cat \$TESTDIR/useful-file.sh
  >   important commando
  > EOF

  $ cd ..
  $ rt tmp/test-*.t
  running 2 tests using 1 parallel processes 
  
  --- $TESTTMP/anothertests/tmp/test-folder-fail.t
  +++ $TESTTMP/anothertests/tmp/test-folder-fail.t.err
  @@ -1,2 +1,2 @@
     $ cat $TESTDIR/useful-file.sh
  -  important commando
  +  important command
  
  ERROR: test-folder-fail.t output changed
  !.
  Failed test-folder-fail.t: output changed
  # Ran 2 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

support for bisecting failed tests automatically
  $ hg init bisect
  $ cd bisect
  $ cat >> test-bisect.t <<EOF
  >   $ echo pass
  >   pass
  > EOF
  $ hg add test-bisect.t
  $ hg ci -m 'good'
  $ cat >> test-bisect.t <<EOF
  >   $ echo pass
  >   fail
  > EOF
  $ hg ci -m 'bad'
  $ rt --known-good-rev=0 test-bisect.t
  running 1 tests using 1 parallel processes 
  
  --- $TESTTMP/anothertests/bisect/test-bisect.t
  +++ $TESTTMP/anothertests/bisect/test-bisect.t.err
  @@ -1,4 +1,4 @@
     $ echo pass
     pass
     $ echo pass
  -  fail
  +  pass
  
  ERROR: test-bisect.t output changed
  !
  Failed test-bisect.t: output changed
  test-bisect.t broken by 72cbf122d116 (bad)
  # Ran 1 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

  $ cd ..

support bisecting a separate repo

  $ hg init bisect-dependent
  $ cd bisect-dependent
  $ cat > test-bisect-dependent.t <<EOF
  >   $ tail -1 \$TESTDIR/../bisect/test-bisect.t
  >     pass
  > EOF
  $ hg commit -Am dependent test-bisect-dependent.t

  $ rt --known-good-rev=0 test-bisect-dependent.t
  running 1 tests using 1 parallel processes 
  
  --- $TESTTMP/anothertests/bisect-dependent/test-bisect-dependent.t
  +++ $TESTTMP/anothertests/bisect-dependent/test-bisect-dependent.t.err
  @@ -1,2 +1,2 @@
     $ tail -1 $TESTDIR/../bisect/test-bisect.t
  -    pass
  +    fail
  
  ERROR: test-bisect-dependent.t output changed
  !
  Failed test-bisect-dependent.t: output changed
  Failed to identify failure point for test-bisect-dependent.t
  # Ran 1 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

  $ rt --bisect-repo=../test-bisect test-bisect-dependent.t
  usage: run-tests.py [options] [tests]
  run-tests.py: error: --bisect-repo cannot be used without --known-good-rev
  [2]

  $ rt --known-good-rev=0 --bisect-repo=../bisect test-bisect-dependent.t
  running 1 tests using 1 parallel processes 
  
  --- $TESTTMP/anothertests/bisect-dependent/test-bisect-dependent.t
  +++ $TESTTMP/anothertests/bisect-dependent/test-bisect-dependent.t.err
  @@ -1,2 +1,2 @@
     $ tail -1 $TESTDIR/../bisect/test-bisect.t
  -    pass
  +    fail
  
  ERROR: test-bisect-dependent.t output changed
  !
  Failed test-bisect-dependent.t: output changed
  test-bisect-dependent.t broken by 72cbf122d116 (bad)
  # Ran 1 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

  $ cd ..

Test a broken #if statement doesn't break run-tests threading.
==============================================================
  $ mkdir broken
  $ cd broken
  $ cat > test-broken.t <<EOF
  > true
  > #if notarealhghavefeature
  >   $ false
  > #endif
  > EOF
  $ for f in 1 2 3 4 ; do
  > cat > test-works-$f.t <<EOF
  > This is test case $f
  >   $ sleep 1
  > EOF
  > done
  $ rt -j 2
  running 5 tests using 2 parallel processes 
  ....
  # Ran 5 tests, 0 skipped, 0 failed.
  skipped: unknown feature: notarealhghavefeature
  
  $ cd ..
  $ rm -rf broken

Test cases in .t files
======================
  $ mkdir cases
  $ cd cases
  $ cat > test-cases-abc.t <<'EOF'
  > #testcases A B C
  >   $ V=B
  > #if A
  >   $ V=A
  > #endif
  > #if C
  >   $ V=C
  > #endif
  >   $ echo $V | sed 's/A/C/'
  >   C
  > #if C
  >   $ [ $V = C ]
  > #endif
  > #if A
  >   $ [ $V = C ]
  >   [1]
  > #endif
  > #if no-C
  >   $ [ $V = C ]
  >   [1]
  > #endif
  >   $ [ $V = D ]
  >   [1]
  > EOF
  $ rt
  running 3 tests using 1 parallel processes 
  .
  --- $TESTTMP/anothertests/cases/test-cases-abc.t
  +++ $TESTTMP/anothertests/cases/test-cases-abc.t#B.err
  @@ -7,7 +7,7 @@
     $ V=C
   #endif
     $ echo $V | sed 's/A/C/'
  -  C
  +  B
   #if C
     $ [ $V = C ]
   #endif
  
  ERROR: test-cases-abc.t#B output changed
  !.
  Failed test-cases-abc.t#B: output changed
  # Ran 3 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

--restart works

  $ rt --restart
  running 2 tests using 1 parallel processes 
  
  --- $TESTTMP/anothertests/cases/test-cases-abc.t
  +++ $TESTTMP/anothertests/cases/test-cases-abc.t#B.err
  @@ -7,7 +7,7 @@
     $ V=C
   #endif
     $ echo $V | sed 's/A/C/'
  -  C
  +  B
   #if C
     $ [ $V = C ]
   #endif
  
  ERROR: test-cases-abc.t#B output changed
  !.
  Failed test-cases-abc.t#B: output changed
  # Ran 2 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

--restart works with outputdir

  $ mkdir output
  $ mv test-cases-abc.t#B.err output
  $ rt --restart --outputdir output
  running 2 tests using 1 parallel processes 
  
  --- $TESTTMP/anothertests/cases/test-cases-abc.t
  +++ $TESTTMP/anothertests/cases/output/test-cases-abc.t#B.err
  @@ -7,7 +7,7 @@
     $ V=C
   #endif
     $ echo $V | sed 's/A/C/'
  -  C
  +  B
   #if C
     $ [ $V = C ]
   #endif
  
  ERROR: test-cases-abc.t#B output changed
  !.
  Failed test-cases-abc.t#B: output changed
  # Ran 2 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

Test TESTCASE variable

  $ cat > test-cases-ab.t <<'EOF'
  >   $ dostuff() {
  >   >   echo "In case $TESTCASE"
  >   > }
  > #testcases A B
  > #if A
  >   $ dostuff
  >   In case A
  > #endif
  > #if B
  >   $ dostuff
  >   In case B
  > #endif
  > EOF
  $ rt test-cases-ab.t
  running 2 tests using 1 parallel processes 
  ..
  # Ran 2 tests, 0 skipped, 0 failed.

Support running a specific test case

  $ rt "test-cases-abc.t#B"
  running 1 tests using 1 parallel processes 
  
  --- $TESTTMP/anothertests/cases/test-cases-abc.t
  +++ $TESTTMP/anothertests/cases/test-cases-abc.t#B.err
  @@ -7,7 +7,7 @@
     $ V=C
   #endif
     $ echo $V | sed 's/A/C/'
  -  C
  +  B
   #if C
     $ [ $V = C ]
   #endif
  
  ERROR: test-cases-abc.t#B output changed
  !
  Failed test-cases-abc.t#B: output changed
  # Ran 1 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

Support running multiple test cases in the same file

  $ rt test-cases-abc.t#B test-cases-abc.t#C
  running 2 tests using 1 parallel processes 
  
  --- $TESTTMP/anothertests/cases/test-cases-abc.t
  +++ $TESTTMP/anothertests/cases/test-cases-abc.t#B.err
  @@ -7,7 +7,7 @@
     $ V=C
   #endif
     $ echo $V | sed 's/A/C/'
  -  C
  +  B
   #if C
     $ [ $V = C ]
   #endif
  
  ERROR: test-cases-abc.t#B output changed
  !.
  Failed test-cases-abc.t#B: output changed
  # Ran 2 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

Support ignoring invalid test cases

  $ rt test-cases-abc.t#B test-cases-abc.t#D
  running 1 tests using 1 parallel processes 
  
  --- $TESTTMP/anothertests/cases/test-cases-abc.t
  +++ $TESTTMP/anothertests/cases/test-cases-abc.t#B.err
  @@ -7,7 +7,7 @@
     $ V=C
   #endif
     $ echo $V | sed 's/A/C/'
  -  C
  +  B
   #if C
     $ [ $V = C ]
   #endif
  
  ERROR: test-cases-abc.t#B output changed
  !
  Failed test-cases-abc.t#B: output changed
  # Ran 1 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

Support running complex test cases names

  $ cat > test-cases-advanced-cases.t <<'EOF'
  > #testcases simple case-with-dashes casewith_-.chars
  >   $ echo $TESTCASE
  >   simple
  > EOF

  $ cat test-cases-advanced-cases.t
  #testcases simple case-with-dashes casewith_-.chars
    $ echo $TESTCASE
    simple

  $ rt test-cases-advanced-cases.t
  running 3 tests using 1 parallel processes 
  
  --- $TESTTMP/anothertests/cases/test-cases-advanced-cases.t
  +++ $TESTTMP/anothertests/cases/test-cases-advanced-cases.t#case-with-dashes.err
  @@ -1,3 +1,3 @@
   #testcases simple case-with-dashes casewith_-.chars
     $ echo $TESTCASE
  -  simple
  +  case-with-dashes
  
  ERROR: test-cases-advanced-cases.t#case-with-dashes output changed
  !
  --- $TESTTMP/anothertests/cases/test-cases-advanced-cases.t
  +++ $TESTTMP/anothertests/cases/test-cases-advanced-cases.t#casewith_-.chars.err
  @@ -1,3 +1,3 @@
   #testcases simple case-with-dashes casewith_-.chars
     $ echo $TESTCASE
  -  simple
  +  casewith_-.chars
  
  ERROR: test-cases-advanced-cases.t#casewith_-.chars output changed
  !.
  Failed test-cases-advanced-cases.t#case-with-dashes: output changed
  Failed test-cases-advanced-cases.t#casewith_-.chars: output changed
  # Ran 3 tests, 0 skipped, 2 failed.
  python hash seed: * (glob)
  [1]

  $ rt "test-cases-advanced-cases.t#case-with-dashes"
  running 1 tests using 1 parallel processes 
  
  --- $TESTTMP/anothertests/cases/test-cases-advanced-cases.t
  +++ $TESTTMP/anothertests/cases/test-cases-advanced-cases.t#case-with-dashes.err
  @@ -1,3 +1,3 @@
   #testcases simple case-with-dashes casewith_-.chars
     $ echo $TESTCASE
  -  simple
  +  case-with-dashes
  
  ERROR: test-cases-advanced-cases.t#case-with-dashes output changed
  !
  Failed test-cases-advanced-cases.t#case-with-dashes: output changed
  # Ran 1 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

  $ rt "test-cases-advanced-cases.t#casewith_-.chars"
  running 1 tests using 1 parallel processes 
  
  --- $TESTTMP/anothertests/cases/test-cases-advanced-cases.t
  +++ $TESTTMP/anothertests/cases/test-cases-advanced-cases.t#casewith_-.chars.err
  @@ -1,3 +1,3 @@
   #testcases simple case-with-dashes casewith_-.chars
     $ echo $TESTCASE
  -  simple
  +  casewith_-.chars
  
  ERROR: test-cases-advanced-cases.t#casewith_-.chars output changed
  !
  Failed test-cases-advanced-cases.t#casewith_-.chars: output changed
  # Ran 1 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

Test automatic pattern replacement
==================================

  $ cat << EOF >> common-pattern.py
  > substitutions = [
  >     (br'foo-(.*)\\b',
  >      br'\$XXX=\\1\$'),
  >     (br'bar\\n',
  >      br'\$YYY$\\n'),
  > ]
  > EOF

  $ cat << EOF >> test-substitution.t
  >   $ echo foo-12
  >   \$XXX=12$
  >   $ echo foo-42
  >   \$XXX=42$
  >   $ echo bar prior
  >   bar prior
  >   $ echo lastbar
  >   last\$YYY$
  >   $ echo foo-bar foo-baz
  > EOF

  $ rt test-substitution.t
  running 1 tests using 1 parallel processes 
  
  --- $TESTTMP/anothertests/cases/test-substitution.t
  +++ $TESTTMP/anothertests/cases/test-substitution.t.err
  @@ -7,3 +7,4 @@
     $ echo lastbar
     last$YYY$
     $ echo foo-bar foo-baz
  +  $XXX=bar foo-baz$
  
  ERROR: test-substitution.t output changed
  !
  Failed test-substitution.t: output changed
  # Ran 1 tests, 0 skipped, 1 failed.
  python hash seed: * (glob)
  [1]

--extra-config-opt works

  $ cat << EOF >> test-config-opt.t
  >   $ hg init test-config-opt
  >   $ hg -R test-config-opt purge
  > EOF

  $ rt --extra-config-opt extensions.purge= test-config-opt.t
  running 1 tests using 1 parallel processes 
  .
  # Ran 1 tests, 0 skipped, 0 failed.

Test conditional output matching
================================

  $ cat << EOF >> test-conditional-matching.t
  > #testcases foo bar
  >   $ echo richtig
  >   richtig (true !)
  >   $ echo falsch
  >   falsch (false !)
  > #if foo
  >   $ echo arthur
  >   arthur (bar !)
  > #endif
  >   $ echo celeste
  >   celeste (foo !)
  >   $ echo zephir
  >   zephir (bar !)
  > EOF

  $ rt test-conditional-matching.t
  running 2 tests using 1 parallel processes 
  
  --- $TESTTMP/anothertests/cases/test-conditional-matching.t
  +++ $TESTTMP/anothertests/cases/test-conditional-matching.t#bar.err
  @@ -3,11 +3,13 @@
     richtig (true !)
     $ echo falsch
     falsch (false !)
  +  falsch
   #if foo
     $ echo arthur
     arthur \(bar !\) (re)
   #endif
     $ echo celeste
     celeste \(foo !\) (re)
  +  celeste
     $ echo zephir
     zephir \(bar !\) (re)
  
  ERROR: test-conditional-matching.t#bar output changed
  !
  --- $TESTTMP/anothertests/cases/test-conditional-matching.t
  +++ $TESTTMP/anothertests/cases/test-conditional-matching.t#foo.err
  @@ -3,11 +3,14 @@
     richtig (true !)
     $ echo falsch
     falsch (false !)
  +  falsch
   #if foo
     $ echo arthur
     arthur \(bar !\) (re)
  +  arthur
   #endif
     $ echo celeste
     celeste \(foo !\) (re)
     $ echo zephir
     zephir \(bar !\) (re)
  +  zephir
  
  ERROR: test-conditional-matching.t#foo output changed
  !
  Failed test-conditional-matching.t#bar: output changed
  Failed test-conditional-matching.t#foo: output changed
  # Ran 2 tests, 0 skipped, 2 failed.
  python hash seed: * (glob)
  [1]