annotate hgext/gpg.py @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

# Copyright 2005, 2006 Benoit Boissinot <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''commands to sign and verify changesets'''

from __future__ import absolute_import

import binascii
import os

from mercurial.i18n import _
from mercurial import (
    cmdutil,
    error,
    help,
    match,
    node as hgnode,
    pycompat,
    registrar,
)
from mercurial.utils import (
    dateutil,
    procutil,
)

cmdtable = {}
command = registrar.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = b'ships-with-hg-core'

configtable = {}
configitem = registrar.configitem(configtable)

configitem(
    b'gpg', b'cmd', default=b'gpg',
)
configitem(
    b'gpg', b'key', default=None,
)
configitem(
    b'gpg', b'.*', default=None, generic=True,
)

# Custom help category
_HELP_CATEGORY = b'gpg'
help.CATEGORY_ORDER.insert(
    help.CATEGORY_ORDER.index(registrar.command.CATEGORY_HELP), _HELP_CATEGORY
)
help.CATEGORY_NAMES[_HELP_CATEGORY] = b'Signing changes (GPG)'


class gpg(object):
    def __init__(self, path, key=None):
        self.path = path
        self.key = (key and b" --local-user \"%s\"" % key) or b""

    def sign(self, data):
        gpgcmd = b"%s --sign --detach-sign%s" % (self.path, self.key)
        return procutil.filter(data, gpgcmd)

    def verify(self, data, sig):
        """ returns of the good and bad signatures"""
        sigfile = datafile = None
        try:
            # create temporary files
            fd, sigfile = pycompat.mkstemp(prefix=b"hg-gpg-", suffix=b".sig")
            fp = os.fdopen(fd, 'wb')
            fp.write(sig)
            fp.close()
            fd, datafile = pycompat.mkstemp(prefix=b"hg-gpg-", suffix=b".txt")
            fp = os.fdopen(fd, 'wb')
            fp.write(data)
            fp.close()
            gpgcmd = (
                b"%s --logger-fd 1 --status-fd 1 --verify \"%s\" \"%s\""
                % (self.path, sigfile, datafile,)
            )
            ret = procutil.filter(b"", gpgcmd)
        finally:
            for f in (sigfile, datafile):
                try:
                    if f:
                        os.unlink(f)
                except OSError:
                    pass
        keys = []
        key, fingerprint = None, None
        for l in ret.splitlines():
            # see DETAILS in the gnupg documentation
            # filter the logger output
            if not l.startswith(b"[GNUPG:]"):
                continue
            l = l[9:]
            if l.startswith(b"VALIDSIG"):
                # fingerprint of the primary key
                fingerprint = l.split()[10]
            elif l.startswith(b"ERRSIG"):
                key = l.split(b" ", 3)[:2]
                key.append(b"")
                fingerprint = None
            elif (
                l.startswith(b"GOODSIG")
                or l.startswith(b"EXPSIG")
                or l.startswith(b"EXPKEYSIG")
                or l.startswith(b"BADSIG")
            ):
                if key is not None:
                    keys.append(key + [fingerprint])
                key = l.split(b" ", 2)
                fingerprint = None
        if key is not None:
            keys.append(key + [fingerprint])
        return keys


def newgpg(ui, **opts):
    """create a new gpg instance"""
    gpgpath = ui.config(b"gpg", b"cmd")
    gpgkey = opts.get('key')
    if not gpgkey:
        gpgkey = ui.config(b"gpg", b"key")
    return gpg(gpgpath, gpgkey)


def sigwalk(repo):
    """
    walk over every sigs, yields a couple
    ((node, version, sig), (filename, linenumber))
    """

    def parsefile(fileiter, context):
        ln = 1
        for l in fileiter:
            if not l:
                continue
            yield (l.split(b" ", 2), (context, ln))
            ln += 1

    # read the heads
    fl = repo.file(b".hgsigs")
    for r in reversed(fl.heads()):
        fn = b".hgsigs|%s" % hgnode.short(r)
        for item in parsefile(fl.read(r).splitlines(), fn):
            yield item
    try:
        # read local signatures
        fn = b"localsigs"
        for item in parsefile(repo.vfs(fn), fn):
            yield item
    except IOError:
        pass


def getkeys(ui, repo, mygpg, sigdata, context):
    """get the keys who signed a data"""
    fn, ln = context
    node, version, sig = sigdata
    prefix = b"%s:%d" % (fn, ln)
    node = hgnode.bin(node)

    data = node2txt(repo, node, version)
    sig = binascii.a2b_base64(sig)
    keys = mygpg.verify(data, sig)

    validkeys = []
    # warn for expired key and/or sigs
    for key in keys:
        if key[0] == b"ERRSIG":
            ui.write(_(b"%s Unknown key ID \"%s\"\n") % (prefix, key[1]))
            continue
        if key[0] == b"BADSIG":
            ui.write(_(b"%s Bad signature from \"%s\"\n") % (prefix, key[2]))
            continue
        if key[0] == b"EXPSIG":
            ui.write(
                _(b"%s Note: Signature has expired (signed by: \"%s\")\n")
                % (prefix, key[2])
            )
        elif key[0] == b"EXPKEYSIG":
            ui.write(
                _(b"%s Note: This key has expired (signed by: \"%s\")\n")
                % (prefix, key[2])
            )
        validkeys.append((key[1], key[2], key[3]))
    return validkeys


@command(b"sigs", [], _(b'hg sigs'), helpcategory=_HELP_CATEGORY)
def sigs(ui, repo):
    """list signed changesets"""
    mygpg = newgpg(ui)
    revs = {}

    for data, context in sigwalk(repo):
        node, version, sig = data
        fn, ln = context
        try:
            n = repo.lookup(node)
        except KeyError:
            ui.warn(_(b"%s:%d node does not exist\n") % (fn, ln))
            continue
        r = repo.changelog.rev(n)
        keys = getkeys(ui, repo, mygpg, data, context)
        if not keys:
            continue
        revs.setdefault(r, [])
        revs[r].extend(keys)
    for rev in sorted(revs, reverse=True):
        for k in revs[rev]:
            r = b"%5d:%s" % (rev, hgnode.hex(repo.changelog.node(rev)))
            ui.write(b"%-30s %s\n" % (keystr(ui, k), r))


@command(b"sigcheck", [], _(b'hg sigcheck REV'), helpcategory=_HELP_CATEGORY)
def sigcheck(ui, repo, rev):
    """verify all the signatures there may be for a particular revision"""
    mygpg = newgpg(ui)
    rev = repo.lookup(rev)
    hexrev = hgnode.hex(rev)
    keys = []

    for data, context in sigwalk(repo):
        node, version, sig = data
        if node == hexrev:
            k = getkeys(ui, repo, mygpg, data, context)
            if k:
                keys.extend(k)

    if not keys:
        ui.write(_(b"no valid signature for %s\n") % hgnode.short(rev))
        return

    # print summary
    ui.write(_(b"%s is signed by:\n") % hgnode.short(rev))
    for key in keys:
        ui.write(b" %s\n" % keystr(ui, key))


def keystr(ui, key):
    """associate a string to a key (username, comment)"""
    keyid, user, fingerprint = key
    comment = ui.config(b"gpg", fingerprint)
    if comment:
        return b"%s (%s)" % (user, comment)
    else:
        return user


@command(
    b"sign",
    [
        (b'l', b'local', None, _(b'make the signature local')),
        (b'f', b'force', None, _(b'sign even if the sigfile is modified')),
        (
            b'',
            b'no-commit',
            None,
            _(b'do not commit the sigfile after signing'),
        ),
        (b'k', b'key', b'', _(b'the key id to sign with'), _(b'ID')),
        (b'm', b'message', b'', _(b'use text as commit message'), _(b'TEXT')),
        (b'e', b'edit', False, _(b'invoke editor on commit messages')),
    ]
    + cmdutil.commitopts2,
    _(b'hg sign [OPTION]... [REV]...'),
    helpcategory=_HELP_CATEGORY,
)
def sign(ui, repo, *revs, **opts):
    """add a signature for the current or given revision

    If no revision is given, the parent of the working directory is used,
    or tip if no revision is checked out.

    The ``gpg.cmd`` config setting can be used to specify the command
    to run. A default key can be specified with ``gpg.key``.

    See :hg:`help dates` for a list of formats valid for -d/--date.
    """
    with repo.wlock():
        return _dosign(ui, repo, *revs, **opts)


def _dosign(ui, repo, *revs, **opts):
    mygpg = newgpg(ui, **opts)
    opts = pycompat.byteskwargs(opts)
    sigver = b"0"
    sigmessage = b""

    date = opts.get(b'date')
    if date:
        opts[b'date'] = dateutil.parsedate(date)

    if revs:
        nodes = [repo.lookup(n) for n in revs]
    else:
        nodes = [
            node for node in repo.dirstate.parents() if node != hgnode.nullid
        ]
        if len(nodes) > 1:
            raise error.Abort(
                _(b'uncommitted merge - please provide a specific revision')
            )
        if not nodes:
            nodes = [repo.changelog.tip()]

    for n in nodes:
        hexnode = hgnode.hex(n)
        ui.write(
            _(b"signing %d:%s\n") % (repo.changelog.rev(n), hgnode.short(n))
        )
        # build data
        data = node2txt(repo, n, sigver)
        sig = mygpg.sign(data)
        if not sig:
            raise error.Abort(_(b"error while signing"))
        sig = binascii.b2a_base64(sig)
        sig = sig.replace(b"\n", b"")
        sigmessage += b"%s %s %s\n" % (hexnode, sigver, sig)

    # write it
    if opts[b'local']:
        repo.vfs.append(b"localsigs", sigmessage)
        return

    if not opts[b"force"]:
        msigs = match.exact([b'.hgsigs'])
        if any(repo.status(match=msigs, unknown=True, ignored=True)):
            raise error.Abort(
                _(b"working copy of .hgsigs is changed "),
                hint=_(b"please commit .hgsigs manually"),
            )

    sigsfile = repo.wvfs(b".hgsigs", b"ab")
    sigsfile.write(sigmessage)
    sigsfile.close()

    if b'.hgsigs' not in repo.dirstate:
        repo[None].add([b".hgsigs"])

    if opts[b"no_commit"]:
        return

    message = opts[b'message']
    if not message:
        # we don't translate commit messages
        message = b"\n".join(
            [
                b"Added signature for changeset %s" % hgnode.short(n)
                for n in nodes
            ]
        )
    try:
        editor = cmdutil.getcommiteditor(
            editform=b'gpg.sign', **pycompat.strkwargs(opts)
        )
        repo.commit(
            message, opts[b'user'], opts[b'date'], match=msigs, editor=editor
        )
    except ValueError as inst:
        raise error.Abort(pycompat.bytestr(inst))


def node2txt(repo, node, ver):
    """map a manifest into some text"""
    if ver == b"0":
        return b"%s\n" % hgnode.hex(node)
    else:
        raise error.Abort(_(b"unknown signature version"))


def extsetup(ui):
    # Add our category before "Repository maintenance".
    help.CATEGORY_ORDER.insert(
        help.CATEGORY_ORDER.index(command.CATEGORY_MAINTENANCE), _HELP_CATEGORY
    )
    help.CATEGORY_NAMES[_HELP_CATEGORY] = b'GPG signing'