tests/test-mq-pull-from-bundle.t

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

#require repobundlerepo

  $ cat <<EOF >> $HGRCPATH
  > [extensions]
  > mq=
  > [alias]
  > tlog = log --template "{rev}: {node|short} {desc}\\n"
  > theads = heads --template "{rev}: {desc}\\n"
  > tincoming = incoming --template "{rev}: {desc}\\n"
  > EOF

Setup main:

  $ hg init base
  $ cd base
  $ echo "One" > one
  $ hg add
  adding one
  $ hg ci -m "main: one added"
  $ echo "++" >> one
  $ hg ci -m "main: one updated"

Bundle main:

  $ hg bundle --base=null ../main.hg
  2 changesets found

  $ cd ..

Incoming to fresh repo:

  $ hg init fresh

  $ hg -R fresh tincoming main.hg
  comparing with main.hg
  0: main: one added
  1: main: one updated
  $ test -f ./fresh/.hg/hg-bundle* && echo 'temp. bundle file remained' || true

  $ hg -R fresh tincoming bundle:fresh+main.hg
  comparing with bundle:fresh+main.hg
  0: main: one added
  1: main: one updated


Setup queue:

  $ cd base
  $ hg qinit -c
  $ hg qnew -m "patch: two added" two.patch
  $ echo two > two
  $ hg add
  adding two
  $ hg qrefresh
  $ hg qcommit -m "queue: two.patch added"
  $ hg qpop -a
  popping two.patch
  patch queue now empty

Bundle queue:

  $ hg -R .hg/patches bundle --base=null ../queue.hgq
  1 changesets found
  $ test -f ./fresh/.hg/hg-bundle* && echo 'temp. bundle file remained' || true

  $ cd ..


Clone base:

  $ hg clone base copy
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd copy
  $ hg qinit -c

Incoming queue bundle:

  $ hg -R .hg/patches tincoming ../queue.hgq
  comparing with ../queue.hgq
  0: queue: two.patch added
  $ test -f .hg/hg-bundle* && echo 'temp. bundle file remained' || true

Pull queue bundle:

  $ hg -R .hg/patches pull --update ../queue.hgq
  pulling from ../queue.hgq
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 3 changes to 3 files
  new changesets d7553909353d (1 drafts)
  merging series
  2 files updated, 1 files merged, 0 files removed, 0 files unresolved
  $ test -f .hg/patches/hg-bundle* && echo 'temp. bundle file remained' || true

  $ hg -R .hg/patches theads
  0: queue: two.patch added

  $ hg -R .hg/patches tlog
  0: d7553909353d queue: two.patch added

  $ hg qseries
  two.patch

  $ cd ..


Clone base again:

  $ hg clone base copy2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd copy2
  $ hg qinit -c

Unbundle queue bundle:

  $ hg -R .hg/patches unbundle --update ../queue.hgq
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 3 changes to 3 files
  new changesets d7553909353d (1 drafts)
  merging series
  2 files updated, 1 files merged, 0 files removed, 0 files unresolved

  $ hg -R .hg/patches theads
  0: queue: two.patch added

  $ hg -R .hg/patches tlog
  0: d7553909353d queue: two.patch added

  $ hg qseries
  two.patch

  $ cd ..