tests/badserverext.py

py3: make stdout line-buffered if connected to a TTY

Status messages that are to be shown on the terminal should be written to the
file descriptor before anything further is done, to keep the user updated.

One common way to achieve this is to make stdout line-buffered if it is
connected to a TTY. This is done on Python 2 (except on Windows, where libc,
which the CPython 2 streams depend on, does not properly support this).

Python 3 rolls it own I/O streams. On Python 3, buffered binary streams can't be
set line-buffered. The previous code (added in 227ba1afcb65) incorrectly
assumed that on Python 3, pycompat.stdout (sys.stdout.buffer) is already
line-buffered. However the interpreter initializes it with a block-buffered
stream or an unbuffered stream (when the -u option or the PYTHONUNBUFFERED
environment variable is set), never with a line-buffered stream.

One example where the current behavior is unacceptable is when running
`hg pull https://www.mercurial-scm.org/repo/hg` on Python 3, where the line
"pulling from https://www.mercurial-scm.org/repo/hg" does not appear on the
terminal before the hg process blocks while waiting for the server.

Various approaches to fix this problem are possible, including:

1. Weaken the contract of procutil.stdout to not give any guarantees about
   buffering behavior. In this case, users of procutil.stdout need to be
   changed to do enough flushes. In particular,
  1. either ui must insert enough flushes for ui.write() and friends, or
  2. ui.write() and friends get split into flushing and fully buffered
     methods, or
  3. users of ui.write() and friends must flush explicitly.
2. Make stdout unbuffered.
3. Make stdout line-buffered. Since Python 3 does not natively support that for
   binary streams, we must implement it ourselves.

(2.) is problematic because using unbuffered I/O changes the performance
characteristics significantly compared to line-buffered (which is used on
Python 2) and this would be a regression.

(1.2.) and (1.3) are a substantial amount of work. It’s unclear whether the
added complexity would be justified, given that raw performance doesn’t matter
that much when writing to a terminal much faster than the user could read it.

(1.1.) pushes complexity into the ui class instead of separating the concern of
how stdout is buffered. Other users of procutil.stdout would still need to take
care of the flushes.

This patch implements (3.). The general performance considerations are very
similar to (1.1.). The extra method invocation and method forwarding add a
little more overhead if the class is used. In exchange, it doesn’t add overhead
if not used.


For the benchmarks, I compared the previous implementation (incorrect on Python
3), (1.1.), (3.) and (2.). The command was chosen so that the streams were
configured as if they were writing to a TTY, but actually write to a pager,
which is also the default:
HGRCPATH=/dev/null python3 ./hg --cwd ~/vcs/mozilla-central --time --pager yes --config pager.pager='cat > /dev/null' status --all

previous:
time: real 7.880 secs (user 7.290+0.050 sys 0.580+0.170)
time: real 7.830 secs (user 7.220+0.070 sys 0.590+0.140)
time: real 7.800 secs (user 7.210+0.050 sys 0.570+0.170)

(1.1.) using Yuya Nishihara’s patch:
time: real 9.860 secs (user 8.670+0.350 sys 1.160+0.830)
time: real 9.540 secs (user 8.430+0.370 sys 1.100+0.770)
time: real 9.830 secs (user 8.630+0.370 sys 1.180+0.840)

(3.) using this patch:
time: real 9.580 secs (user 8.480+0.350 sys 1.090+0.770)
time: real 9.670 secs (user 8.480+0.330 sys 1.170+0.860)
time: real 9.640 secs (user 8.500+0.350 sys 1.130+0.810)

(2.) using a previous patch by me:
time: real 10.480 secs (user 8.850+0.720 sys 1.590+1.500)
time: real 10.490 secs (user 8.750+0.750 sys 1.710+1.470)
time: real 10.240 secs (user 8.600+0.700 sys 1.590+1.510)


As expected, there’s no difference on Python 2, as exactly the same code paths
are used:

previous:
time: real 6.950 secs (user 5.870+0.330 sys 1.070+0.770)
time: real 7.040 secs (user 6.040+0.360 sys 0.980+0.750)
time: real 7.070 secs (user 5.950+0.360 sys 1.100+0.760)

this patch:
time: real 7.010 secs (user 5.900+0.390 sys 1.070+0.730)
time: real 7.000 secs (user 5.850+0.350 sys 1.120+0.760)
time: real 7.000 secs (user 5.790+0.380 sys 1.170+0.710)

# badserverext.py - Extension making servers behave badly
#
# Copyright 2017 Gregory Szorc <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

# no-check-code

"""Extension to make servers behave badly.

This extension is useful for testing Mercurial behavior when various network
events occur.

Various config options in the [badserver] section influence behavior:

closebeforeaccept
   If true, close() the server socket when a new connection arrives before
   accept() is called. The server will then exit.

closeafteraccept
   If true, the server will close() the client socket immediately after
   accept().

closeafterrecvbytes
   If defined, close the client socket after receiving this many bytes.

closeaftersendbytes
   If defined, close the client socket after sending this many bytes.
"""

from __future__ import absolute_import

import socket

from mercurial import (
    pycompat,
    registrar,
)

from mercurial.hgweb import server

configtable = {}
configitem = registrar.configitem(configtable)

configitem(
    b'badserver', b'closeafteraccept', default=False,
)
configitem(
    b'badserver', b'closeafterrecvbytes', default=b'0',
)
configitem(
    b'badserver', b'closeaftersendbytes', default=b'0',
)
configitem(
    b'badserver', b'closebeforeaccept', default=False,
)

# We can't adjust __class__ on a socket instance. So we define a proxy type.
class socketproxy(object):
    __slots__ = (
        '_orig',
        '_logfp',
        '_closeafterrecvbytes',
        '_closeaftersendbytes',
    )

    def __init__(
        self, obj, logfp, closeafterrecvbytes=0, closeaftersendbytes=0
    ):
        object.__setattr__(self, '_orig', obj)
        object.__setattr__(self, '_logfp', logfp)
        object.__setattr__(self, '_closeafterrecvbytes', closeafterrecvbytes)
        object.__setattr__(self, '_closeaftersendbytes', closeaftersendbytes)

    def __getattribute__(self, name):
        if name in ('makefile', 'sendall', '_writelog'):
            return object.__getattribute__(self, name)

        return getattr(object.__getattribute__(self, '_orig'), name)

    def __delattr__(self, name):
        delattr(object.__getattribute__(self, '_orig'), name)

    def __setattr__(self, name, value):
        setattr(object.__getattribute__(self, '_orig'), name, value)

    def _writelog(self, msg):
        msg = msg.replace(b'\r', b'\\r').replace(b'\n', b'\\n')

        object.__getattribute__(self, '_logfp').write(msg)
        object.__getattribute__(self, '_logfp').write(b'\n')
        object.__getattribute__(self, '_logfp').flush()

    def makefile(self, mode, bufsize):
        f = object.__getattribute__(self, '_orig').makefile(mode, bufsize)

        logfp = object.__getattribute__(self, '_logfp')
        closeafterrecvbytes = object.__getattribute__(
            self, '_closeafterrecvbytes'
        )
        closeaftersendbytes = object.__getattribute__(
            self, '_closeaftersendbytes'
        )

        return fileobjectproxy(
            f,
            logfp,
            closeafterrecvbytes=closeafterrecvbytes,
            closeaftersendbytes=closeaftersendbytes,
        )

    def sendall(self, data, flags=0):
        remaining = object.__getattribute__(self, '_closeaftersendbytes')

        # No read limit. Call original function.
        if not remaining:
            result = object.__getattribute__(self, '_orig').sendall(data, flags)
            self._writelog(b'sendall(%d) -> %s' % (len(data), data))
            return result

        if len(data) > remaining:
            newdata = data[0:remaining]
        else:
            newdata = data

        remaining -= len(newdata)

        result = object.__getattribute__(self, '_orig').sendall(newdata, flags)

        self._writelog(
            b'sendall(%d from %d) -> (%d) %s'
            % (len(newdata), len(data), remaining, newdata)
        )

        object.__setattr__(self, '_closeaftersendbytes', remaining)

        if remaining <= 0:
            self._writelog(b'write limit reached; closing socket')
            object.__getattribute__(self, '_orig').shutdown(socket.SHUT_RDWR)

            raise Exception('connection closed after sending N bytes')

        return result


# We can't adjust __class__ on socket._fileobject, so define a proxy.
class fileobjectproxy(object):
    __slots__ = (
        '_orig',
        '_logfp',
        '_closeafterrecvbytes',
        '_closeaftersendbytes',
    )

    def __init__(
        self, obj, logfp, closeafterrecvbytes=0, closeaftersendbytes=0
    ):
        object.__setattr__(self, '_orig', obj)
        object.__setattr__(self, '_logfp', logfp)
        object.__setattr__(self, '_closeafterrecvbytes', closeafterrecvbytes)
        object.__setattr__(self, '_closeaftersendbytes', closeaftersendbytes)

    def __getattribute__(self, name):
        if name in ('_close', 'read', 'readline', 'write', '_writelog'):
            return object.__getattribute__(self, name)

        return getattr(object.__getattribute__(self, '_orig'), name)

    def __delattr__(self, name):
        delattr(object.__getattribute__(self, '_orig'), name)

    def __setattr__(self, name, value):
        setattr(object.__getattribute__(self, '_orig'), name, value)

    def _writelog(self, msg):
        msg = msg.replace(b'\r', b'\\r').replace(b'\n', b'\\n')

        object.__getattribute__(self, '_logfp').write(msg)
        object.__getattribute__(self, '_logfp').write(b'\n')
        object.__getattribute__(self, '_logfp').flush()

    def _close(self):
        # Python 3 uses an io.BufferedIO instance. Python 2 uses some file
        # object wrapper.
        if pycompat.ispy3:
            orig = object.__getattribute__(self, '_orig')

            if hasattr(orig, 'raw'):
                orig.raw._sock.shutdown(socket.SHUT_RDWR)
            else:
                self.close()
        else:
            self._sock.shutdown(socket.SHUT_RDWR)

    def read(self, size=-1):
        remaining = object.__getattribute__(self, '_closeafterrecvbytes')

        # No read limit. Call original function.
        if not remaining:
            result = object.__getattribute__(self, '_orig').read(size)
            self._writelog(
                b'read(%d) -> (%d) (%s) %s' % (size, len(result), result)
            )
            return result

        origsize = size

        if size < 0:
            size = remaining
        else:
            size = min(remaining, size)

        result = object.__getattribute__(self, '_orig').read(size)
        remaining -= len(result)

        self._writelog(
            b'read(%d from %d) -> (%d) %s'
            % (size, origsize, len(result), result)
        )

        object.__setattr__(self, '_closeafterrecvbytes', remaining)

        if remaining <= 0:
            self._writelog(b'read limit reached, closing socket')
            self._close()

            # This is the easiest way to abort the current request.
            raise Exception('connection closed after receiving N bytes')

        return result

    def readline(self, size=-1):
        remaining = object.__getattribute__(self, '_closeafterrecvbytes')

        # No read limit. Call original function.
        if not remaining:
            result = object.__getattribute__(self, '_orig').readline(size)
            self._writelog(
                b'readline(%d) -> (%d) %s' % (size, len(result), result)
            )
            return result

        origsize = size

        if size < 0:
            size = remaining
        else:
            size = min(remaining, size)

        result = object.__getattribute__(self, '_orig').readline(size)
        remaining -= len(result)

        self._writelog(
            b'readline(%d from %d) -> (%d) %s'
            % (size, origsize, len(result), result)
        )

        object.__setattr__(self, '_closeafterrecvbytes', remaining)

        if remaining <= 0:
            self._writelog(b'read limit reached; closing socket')
            self._close()

            # This is the easiest way to abort the current request.
            raise Exception('connection closed after receiving N bytes')

        return result

    def write(self, data):
        remaining = object.__getattribute__(self, '_closeaftersendbytes')

        # No byte limit on this operation. Call original function.
        if not remaining:
            self._writelog(b'write(%d) -> %s' % (len(data), data))
            result = object.__getattribute__(self, '_orig').write(data)
            return result

        if len(data) > remaining:
            newdata = data[0:remaining]
        else:
            newdata = data

        remaining -= len(newdata)

        self._writelog(
            b'write(%d from %d) -> (%d) %s'
            % (len(newdata), len(data), remaining, newdata)
        )

        result = object.__getattribute__(self, '_orig').write(newdata)

        object.__setattr__(self, '_closeaftersendbytes', remaining)

        if remaining <= 0:
            self._writelog(b'write limit reached; closing socket')
            self._close()

            raise Exception('connection closed after sending N bytes')

        return result


def extsetup(ui):
    # Change the base HTTP server class so various events can be performed.
    # See SocketServer.BaseServer for how the specially named methods work.
    class badserver(server.MercurialHTTPServer):
        def __init__(self, ui, *args, **kwargs):
            self._ui = ui
            super(badserver, self).__init__(ui, *args, **kwargs)

            recvbytes = self._ui.config(b'badserver', b'closeafterrecvbytes')
            recvbytes = recvbytes.split(b',')
            self.closeafterrecvbytes = [int(v) for v in recvbytes if v]
            sendbytes = self._ui.config(b'badserver', b'closeaftersendbytes')
            sendbytes = sendbytes.split(b',')
            self.closeaftersendbytes = [int(v) for v in sendbytes if v]

            # Need to inherit object so super() works.
            class badrequesthandler(self.RequestHandlerClass, object):
                def send_header(self, name, value):
                    # Make headers deterministic to facilitate testing.
                    if name.lower() == 'date':
                        value = 'Fri, 14 Apr 2017 00:00:00 GMT'
                    elif name.lower() == 'server':
                        value = 'badhttpserver'

                    return super(badrequesthandler, self).send_header(
                        name, value
                    )

            self.RequestHandlerClass = badrequesthandler

        # Called to accept() a pending socket.
        def get_request(self):
            if self._ui.configbool(b'badserver', b'closebeforeaccept'):
                self.socket.close()

                # Tells the server to stop processing more requests.
                self.__shutdown_request = True

                # Simulate failure to stop processing this request.
                raise socket.error('close before accept')

            if self._ui.configbool(b'badserver', b'closeafteraccept'):
                request, client_address = super(badserver, self).get_request()
                request.close()
                raise socket.error('close after accept')

            return super(badserver, self).get_request()

        # Does heavy lifting of processing a request. Invokes
        # self.finish_request() which calls self.RequestHandlerClass() which
        # is a hgweb.server._httprequesthandler.
        def process_request(self, socket, address):
            # Wrap socket in a proxy if we need to count bytes.
            if self.closeafterrecvbytes:
                closeafterrecvbytes = self.closeafterrecvbytes.pop(0)
            else:
                closeafterrecvbytes = 0
            if self.closeaftersendbytes:
                closeaftersendbytes = self.closeaftersendbytes.pop(0)
            else:
                closeaftersendbytes = 0

            if closeafterrecvbytes or closeaftersendbytes:
                socket = socketproxy(
                    socket,
                    self.errorlog,
                    closeafterrecvbytes=closeafterrecvbytes,
                    closeaftersendbytes=closeaftersendbytes,
                )

            return super(badserver, self).process_request(socket, address)

    server.MercurialHTTPServer = badserver