annotate tests/test-audit-path.t @ 36755:ff4bc0ab6740 stable

wireproto: check permissions when executing "batch" command (BC) (SEC)

For as long as the "batch" command has existed (introduced by
bd88561afb4b and first released as part of Mercurial 1.9), that command
(like most wire commands introduced after 2008) lacked an entry in
the hgweb permissions table. And since we don't verify permissions if
an entry is missing from the permissions table, this meant that
executing a command via "batch" would bypass all permissions
checks.

The security implications are significant: a Mercurial HTTP server
would allow writes via "batch" wire protocol commands as long as
the HTTP request were processed by Mercurial and the process running
the Mercurial HTTP server had write access to the repository. The
Mercurial defaults of servers being read-only and the various web.*
config options to define access control were bypassed.

In addition, "batch" could be used to exfiltrate data from servers
that were configured to not allow read access.

Both forms of permissions bypass could be mitigated to some extent
by using HTTP authentication. This would prevent HTTP requests from
hitting Mercurial's server logic. However, any authenticated request
would still be able to bypass permissions checks via "batch" commands.

The easiest exploit was to send "pushkey" commands via "batch" and
modify the state of bookmarks, phases, and obsolescence markers.
However, I suspect a well-crafted HTTP request could trick the server
into running the "unbundle" wire protocol command, effectively
performing a full `hg push` to create new changesets on the remote.

This commit plugs this gaping security hole by having the "batch"
command perform permissions checking on each sub-command that is
being batched. We do this by threading a permissions checking
callable all the way to the protocol handler. The threading is a
bit hacky from a code perspective. But it preserves API compatibility,
which is the proper thing to do on the stable branch.

One of the subtle things we do is assume that a command with an
undefined permission is a "push" command. This is the safest thing to
do from a security perspective: we don't want to take chances that
a command could perform a write even though the server is configured
to not allow writes.

As the test changes demonstrate, it is no longer possible to bypass
permissions via the "batch" wire protocol command.

.. bc::

   The "batch" wire protocol command now enforces permissions of
   each invoked sub-command. Wire protocol commands must define
   their operation type or the "batch" command will assume they
   can write data and will prevent their execution on HTTP servers
   unless the HTTP request method is POST, the server is configured
   to allow pushes, and the (possibly authenticated) HTTP user is
   authorized to perform a push.

  $ hg init

audit of .hg

  $ hg add .hg/00changelog.i
  abort: path contains illegal component: .hg/00changelog.i
  [255]

#if symlink

Symlinks

  $ mkdir a
  $ echo a > a/a
  $ hg ci -Ama
  adding a/a
  $ ln -s a b
  $ echo b > a/b
  $ hg add b/b
  abort: path 'b/b' traverses symbolic link 'b'
  [255]
  $ hg add b

should still fail - maybe

  $ hg add b/b
  abort: path 'b/b' traverses symbolic link 'b'
  [255]

  $ hg commit -m 'add symlink b'


Test symlink traversing when accessing history:
-----------------------------------------------

(build a changeset where the path exists as a directory)

  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ mkdir b
  $ echo c > b/a
  $ hg add b/a
  $ hg ci -m 'add directory b'
  created new head

Test that hg cat does not do anything wrong the working copy has 'b' as directory

  $ hg cat b/a
  c
  $ hg cat -r "desc(directory)" b/a
  c
  $ hg cat -r "desc(symlink)" b/a
  b/a: no such file in rev bc151a1f53bd
  [1]

Test that hg cat does not do anything wrong the working copy has 'b' as a symlink (issue4749)

  $ hg up 'desc(symlink)'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg cat b/a
  b/a: no such file in rev bc151a1f53bd
  [1]
  $ hg cat -r "desc(directory)" b/a
  c
  $ hg cat -r "desc(symlink)" b/a
  b/a: no such file in rev bc151a1f53bd
  [1]

#endif


unbundle tampered bundle

  $ hg init target
  $ cd target
  $ hg unbundle "$TESTDIR/bundles/tampered.hg"
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 6 changes to 6 files (+4 heads)
  new changesets b7da9bf6b037:fc1393d727bc
  (run 'hg heads' to see heads, 'hg merge' to merge)

attack .hg/test

  $ hg manifest -r0
  .hg/test
  $ hg update -Cr0
  abort: path contains illegal component: .hg/test
  [255]

attack foo/.hg/test

  $ hg manifest -r1
  foo/.hg/test
  $ hg update -Cr1
  abort: path 'foo/.hg/test' is inside nested repo 'foo'
  [255]

attack back/test where back symlinks to ..

  $ hg manifest -r2
  back
  back/test
#if symlink
  $ hg update -Cr2
  abort: path 'back/test' traverses symbolic link 'back'
  [255]
#else
('back' will be a file and cause some other system specific error)
  $ hg update -Cr2
  back: is both a file and a directory
  abort: * (glob)
  [255]
#endif

attack ../test

  $ hg manifest -r3
  ../test
  $ mkdir ../test
  $ echo data > ../test/file
  $ hg update -Cr3
  abort: path contains illegal component: ../test
  [255]
  $ cat ../test/file
  data

attack /tmp/test

  $ hg manifest -r4
  /tmp/test
  $ hg update -Cr4
  abort: path contains illegal component: /tmp/test
  [255]

  $ cd ..

Test symlink traversal on merge:
--------------------------------

#if symlink

set up symlink hell

  $ mkdir merge-symlink-out
  $ hg init merge-symlink
  $ cd merge-symlink
  $ touch base
  $ hg commit -qAm base
  $ ln -s ../merge-symlink-out a
  $ hg commit -qAm 'symlink a -> ../merge-symlink-out'
  $ hg up -q 0
  $ mkdir a
  $ touch a/poisoned
  $ hg commit -qAm 'file a/poisoned'
  $ hg log -G -T '{rev}: {desc}\n'
  @  2: file a/poisoned
  |
  | o  1: symlink a -> ../merge-symlink-out
  |/
  o  0: base
  

try trivial merge

  $ hg up -qC 1
  $ hg merge 2
  abort: path 'a/poisoned' traverses symbolic link 'a'
  [255]

try rebase onto other revision: cache of audited paths should be discarded,
and the rebase should fail (issue5628)

  $ hg up -qC 2
  $ hg rebase -s 2 -d 1 --config extensions.rebase=
  rebasing 2:e73c21d6b244 "file a/poisoned" (tip)
  abort: path 'a/poisoned' traverses symbolic link 'a'
  [255]
  $ ls ../merge-symlink-out

  $ cd ..

Test symlink traversal on update:
---------------------------------

  $ mkdir update-symlink-out
  $ hg init update-symlink
  $ cd update-symlink
  $ ln -s ../update-symlink-out a
  $ hg commit -qAm 'symlink a -> ../update-symlink-out'
  $ hg rm a
  $ mkdir a && touch a/b
  $ hg ci -qAm 'file a/b' a/b
  $ hg up -qC 0
  $ hg rm a
  $ mkdir a && touch a/c
  $ hg ci -qAm 'rm a, file a/c'
  $ hg log -G -T '{rev}: {desc}\n'
  @  2: rm a, file a/c
  |
  | o  1: file a/b
  |/
  o  0: symlink a -> ../update-symlink-out
  

try linear update where symlink already exists:

  $ hg up -qC 0
  $ hg up 1
  abort: path 'a/b' traverses symbolic link 'a'
  [255]

try linear update including symlinked directory and its content: paths are
audited first by calculateupdates(), where no symlink is created so both
'a' and 'a/b' are taken as good paths. still applyupdates() should fail.

  $ hg up -qC null
  $ hg up 1
  abort: path 'a/b' traverses symbolic link 'a'
  [255]
  $ ls ../update-symlink-out

try branch update replacing directory with symlink, and its content: the
path 'a' is audited as a directory first, which should be audited again as
a symlink.

  $ rm -f a
  $ hg up -qC 2
  $ hg up 1
  abort: path 'a/b' traverses symbolic link 'a'
  [255]
  $ ls ../update-symlink-out

  $ cd ..

#endif