Mercurial > hg
diff mercurial/help/internals/revlogs.txt @ 27631:c18292a6ff54
internals: document revlog format
It seems like a good idea to document the revlog format.
There is a lot more that could be added to this documentation.
But you have to start somewhere.
author | Gregory Szorc <gregory.szorc@gmail.com> |
---|---|
date | Wed, 30 Dec 2015 16:21:57 -0700 |
parents | |
children | b0b9f6b0a777 |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mercurial/help/internals/revlogs.txt Wed Dec 30 16:21:57 2015 -0700 @@ -0,0 +1,193 @@ +Revisions Logs +============== + +Revision logs - or *revlogs* - are an append only data structure for +storing discrete entries, or *revisions*. They are the primary storage +mechanism of repository data. + +Revlogs effectively model a directed acyclic graph (DAG). Each node +has edges to 1 or 2 *parent* nodes. Each node contains metadata and +the raw value for that node. + +Revlogs consist of entries which have metadata and revision data. +Metadata includes the hash of the revision's content, sizes, and +links to its *parent* entries. The collective metadata is referred +to as the *index* and the revision data is the *data*. + +Revision data is stored as a series of compressed deltas against previous +revisions. + +Revlogs are written in an append-only fashion. We never need to rewrite +a file to insert nor do we need to remove data. Rolling back in-progress +writes can be performed by truncating files. Read locks can be avoided +using simple techniques. This means that references to other data in +the same revlog *always* refer to a previous entry. + +Revlogs can be modeled as 0-indexed arrays. The first revision is +revision #0 and the second is revision #1. The revision -1 is typically +used to mean *does not exist* or *not defined*. + +File Format +----------- + +A revlog begins with a 32-bit big endian integer holding version info +and feature flags. + +This integer is logically divided into 2 16-bit shorts. The least +significant half of the integer is the format/version short. The other +short holds feature flags that dictate behavior of the revlog. + +Only 1 bit of the format/version short is currently used. Remaining +bits are reserved for future use. + +The following values for the format/version short are defined: + +0 + The original revlog version. +1 + RevlogNG (*next generation*). It replaced version 0 when it was + implemented in 2006. + +The feature flags short consists of bit flags. Where 0 is the least +significant bit, the following bit offsets define flags: + +0 + Store revision data inline. +1 + Generaldelta encoding. + +2-15 + Reserved for future use. + +The following header values are common: + +00 00 00 01 + RevlogNG +00 01 00 01 + RevlogNG + inline +00 02 00 01 + RevlogNG + generaldelta +00 03 00 01 + RevlogNG + inline + generaldelta + +Following the 32-bit header is *index* data. Inlined revision data is possibly +located between index entries. More on this layout is described below. + +RevlogNG Format +--------------- + +RevlogNG (version 1) begins with an index describing the revisions in +the revlog. If the ``inline`` flag is set, revision data is stored inline, +or between index entries (as opposed to in a separate container). + +Each index entry is 64 bytes. The byte layout of each entry is as +follows, with byte 0 being the first byte (all data stored as big endian): + +0-5 (6 bytes) + Absolute offset of revision data from beginning of revlog. +6-7 (2 bytes) + Bit flags impacting revision behavior. +8-11 (4 bytes) + Compressed length of revision data / chunk as stored in revlog. +12-15 (4 bytes) + Uncompressed length of revision data / chunk. +16-19 (4 bytes) + Base or previous revision this revision's delta was produced against. + -1 means this revision holds full text (as opposed to a delta). + For generaldelta repos, this is the previous revision in the delta + chain. For non-generaldelta repos, this is the base or first + revision in the delta chain. +20-23 (4 bytes) + A revision this revision is *linked* to. This allows a revision in + one revlog to be forever associated with a revision in another + revlog. For example, a file's revlog may point to the changelog + revision that introduced it. +24-27 (4 bytes) + Revision of 1st parent. -1 indicates no parent. +28-31 (4 bytes) + Revision of 2nd parent. -1 indicates no 2nd parent. +32-63 (32 bytes) + Hash of revision's full text. Currently, SHA-1 is used and only + the first 20 bytes of this field are used. The rest of the bytes + are ignored and should be stored as \0. + +If inline revision data is being stored, the compressed revision data +(of length from bytes offset 8-11 from the index entry) immediately +follows the index entry. There is no header on the revision data. There +is no padding between it and the index entries before and after. + +If revision data is not inline, then raw revision data is stored in a +separate byte container. The offsets from bytes 0-5 and the compressed +length from bytes 8-11 define how to access this data. + +Delta Chains +------------ + +Revision data is encoded as a chain of *chunks*. Each chain begins with +the compressed original full text for that revision. Each subsequent +*chunk* is a *delta* against the previous revision. We therefore call +these chains of chunks/deltas *delta chains*. + +The full text for a revision is reconstructed by loading the original +full text for the base revision of a *delta chain* and then applying +*deltas* until the target revision is reconstructed. + +*Delta chains* are limited in length so lookup time is bound. They are +limited to ~2x the length of the revision's data. The linear distance +between the base chunk and the final chunk is also limited so the +amount of read I/O to load all chunks in the delta chain is bound. + +Deltas and delta chains are either computed against the previous +revision in the revlog or another revision (almost certainly one of +the parents of the revision). Historically, deltas were computed against +the previous revision. The *generaldelta* revlog feature flag (enabled +by default in Mercurial 3.7) activates the mode where deltas are +computed against an arbitrary revision (almost certainly a parent revision). + +File Storage +------------ + +Revlogs logically consist of an index (metadata of entries) and +revision data. This data may be stored together in a single file or in +separate files. The mechanism used is indicated by the ``inline`` feature +flag on the revlog. + +Mercurial's behavior is to use inline storage until a revlog reaches a +certain size, at which point it will be converted to non-inline. The +reason there is a size limit on inline storage is to establish an upper +bound on how much data must be read to load the index. It would be a waste +to read tens or hundreds of extra megabytes of data just to access the +index data. + +The actual layout of revlog files on disk is governed by the repository's +*store format*. Typically, a ``.i`` file represents the index revlog +(possibly containing inline data) and a ``.d`` file holds the revision data. + +Revision Entries +---------------- + +Revision entries consist of an optional 1 byte header followed by an +encoding of the revision data. The headers are as follows: + +\0 (0x00) + Revision data is the entirety of the entry, including this header. +u (0x75) + Raw revision data follows. +x (0x78) + zlib (RFC 1950) data. + + The 0x78 value is actually the first byte of the zlib header (CMF byte). + +Hash Computation +---------------- + +The hash of the revision is stored in the index and is used both as a primary +key and for data integrity verification. + +Currently, SHA-1 is the only supported hashing algorithm. To obtain the SHA-1 +hash of a revision: + +1. Hash the parent nodes +2. Hash the fulltext of the revision + +The 20 byte node ids of the parents are fed into the hasher in ascending order. \ No newline at end of file