Mercurial > hg
view tests/test-exchange-obsmarkers-case-A3.t @ 41163:0101a35deae2
phabricator: warn if unable to amend, instead of aborting after posting
There was a divergence in behavior here between obsolete and strip based
amending. I first noticed the abort when testing outside of the test harness,
but then had trouble recreating it here after reverting the code changes. It
turns out, strip based amend was successfully amending the public commit after
it was posted! It looks like the protection is in the `commit --amend` command,
not in the underlying code that it calls.
I considered doing a preflight check and aborting. But the locks are only
acquired at the end, if amending, and this is too large a section of code to be
wrapped in a maybe-it's-held-or-not context manager for my tastes.
Additionally, some people do post-push reviews, and amending is the default
behavior, so they shouldn't see a misleading error message.
The lack of a 'Differential Revision' entry in the commit message breaks a
{phabreview} test, so it had to be partially conditionalized.
author | Matt Harbison <matt_harbison@yahoo.com> |
---|---|
date | Sat, 05 Jan 2019 15:20:33 -0500 |
parents | 89630d0b3e23 |
children | 34a46d48d24e |
line wrap: on
line source
============================================ Testing obsolescence markers push: Cases A.3 ============================================ Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of all changesets that requested to be "in sync" after the push (even if they are already on both side). This test belongs to a series of tests checking such set is properly computed and applied. This does not tests "obsmarkers" discovery capabilities. Category A: simple cases TestCase 3: old branch split in two, only one of the new one pushed Variants: # a: changesets are known on remote # b: changesets are known on remote (push needs -f) A.3 new branchs created, one pushed. ==================================== .. {{{ .. B' ○⇢ø B .. | | .. \Aø⇠◔ A' .. \|/ .. ● O .. }}} .. .. Markers exist from: .. .. * `A ø⇠○ A'` .. * `B ø⇠○ B'` .. .. Command runs: .. .. * hg push -r A .. .. Expected exchange: .. .. * chain from A .. .. Expected exclude: .. .. * chain from B .. .. Extra note: .. .. If A and B are remontly known, we should expect: .. .. * `hg push` will complain about the new head .. * `hg push` should complain about unstable history creation Setup ----- $ . $TESTDIR/testlib/exchange-obsmarker-util.sh initial $ setuprepos A.3.a creating test repo for test case A.3.a - pulldest - main - pushdest cd into `main` and proceed with env setup $ cd main $ mkcommit A0 $ mkcommit B0 $ hg update -q 0 $ mkcommit A1 created new head $ hg update -q 0 $ mkcommit B1 created new head $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'` obsoleted 1 changesets 1 new orphan changesets $ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'` obsoleted 1 changesets $ hg log -G --hidden @ f6298a8ac3a4 (draft): B1 | | o e5ea8f9c7314 (draft): A1 |/ | x 6e72f0a95b5e (draft): B0 | | | x 28b51eb45704 (draft): A0 |/ o a9bdc8b26820 (public): O $ inspect_obsmarkers obsstore content ================ 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} $ cd .. $ cd .. Actual Test for first version (changeset unknown in remote) ----------------------------------------------------------- $ dotest A.3.a A1 ## Running testcase A.3.a # testing echange of "A1" (e5ea8f9c7314) ## initial state # obstore: main 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest # obstore: pulldest ## pushing "A1" from main to pushdest pushing to pushdest searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files remote: 1 new obsolescence markers ## post push state # obstore: main 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pulldest ## pulling "e5ea8f9c7314" from main into pulldest pulling from main searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files 1 new obsolescence markers new changesets e5ea8f9c7314 (1 drafts) (run 'hg update' to get a working copy) ## post pull state # obstore: main 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pulldest 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} other variant: changeset known in remote ---------------------------------------- $ setuprepos A.3.b creating test repo for test case A.3.b - pulldest - main - pushdest cd into `main` and proceed with env setup $ cd main $ mkcommit A0 $ mkcommit B0 $ hg push -q ../pushdest $ hg push -q ../pulldest $ hg update -q 0 $ mkcommit A1 created new head $ hg update -q 0 $ mkcommit B1 created new head $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'` obsoleted 1 changesets 1 new orphan changesets $ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'` obsoleted 1 changesets $ hg log -G --hidden @ f6298a8ac3a4 (draft): B1 | | o e5ea8f9c7314 (draft): A1 |/ | x 6e72f0a95b5e (draft): B0 | | | x 28b51eb45704 (draft): A0 |/ o a9bdc8b26820 (public): O $ inspect_obsmarkers obsstore content ================ 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} $ cd .. $ cd .. Actual Test for first version (changeset known in remote) ----------------------------------------------------------- check it complains about multiple heads $ cd A.3.b $ hg push -R main -r 'desc(A1)' pushdest pushing to pushdest searching for changes abort: push creates new remote head e5ea8f9c7314! (merge or see 'hg help push' for details about pushing new heads) [255] $ cd .. test obsmarkers exchange. $ dotest A.3.b A1 -f ## Running testcase A.3.b # testing echange of "A1" (e5ea8f9c7314) ## initial state # obstore: main 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest # obstore: pulldest ## pushing "A1" from main to pushdest pushing to pushdest searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files (+1 heads) remote: 1 new obsolescence markers remote: obsoleted 1 changesets remote: 1 new orphan changesets ## post push state # obstore: main 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pulldest ## pulling "e5ea8f9c7314" from main into pulldest pulling from main searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) 1 new obsolescence markers obsoleted 1 changesets 1 new orphan changesets new changesets e5ea8f9c7314 (1 drafts) (run 'hg heads' to see heads, 'hg merge' to merge) ## post pull state # obstore: main 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pulldest 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}