mq: make qsave implementation more explicit
It wasn't obvious from the code how qsave mocked around with .hg/patches and
.hg/patches.? and what was going on.
This makes it more explicit so it will survive future refactorings.
This test tries to exercise the ssh functionality with a dummy script
creating 'remote' repo
$ hg init remote
$ cd remote
$ echo this > foo
$ echo this > fooO
$ hg ci -A -m "init" foo fooO
$ cat <<EOF > .hg/hgrc
> [server]
> uncompressed = True
>
> [hooks]
> changegroup = python "$TESTDIR"/printenv.py changegroup-in-remote 0 ../dummylog
> EOF
$ cd ..
repo not found error
$ hg clone -e "python $TESTDIR/dummyssh" ssh://user@dummy/nonexistent local
remote: abort: There is no Mercurial repository here (.hg not found)!
abort: no suitable response from remote hg!
[255]
non-existent absolute path
$ hg clone -e "python $TESTDIR/dummyssh" ssh://user@dummy//`pwd`/nonexistent local
remote: abort: There is no Mercurial repository here (.hg not found)!
abort: no suitable response from remote hg!
[255]
clone remote via stream
$ hg clone -e "python $TESTDIR/dummyssh" --uncompressed ssh://user@dummy/remote local-stream
streaming all changes
4 files to transfer, 392 bytes of data
transferred 392 bytes in * seconds (*/sec) (glob)
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd local-stream
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
2 files, 1 changesets, 2 total revisions
$ cd ..
clone remote via pull
$ hg clone -e "python $TESTDIR/dummyssh" ssh://user@dummy/remote local
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
verify
$ cd local
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
2 files, 1 changesets, 2 total revisions
$ echo '[hooks]' >> .hg/hgrc
$ echo 'changegroup = python "$TESTDIR"/printenv.py changegroup-in-local 0 ../dummylog' >> .hg/hgrc
empty default pull
$ hg paths
default = ssh://user@dummy/remote
$ hg pull -e "python $TESTDIR/dummyssh"
pulling from ssh://user@dummy/remote
searching for changes
no changes found
local change
$ echo bleah > foo
$ hg ci -m "add"
updating rc
$ echo "default-push = ssh://user@dummy/remote" >> .hg/hgrc
$ echo "[ui]" >> .hg/hgrc
$ echo "ssh = python $TESTDIR/dummyssh" >> .hg/hgrc
find outgoing
$ hg out ssh://user@dummy/remote
comparing with ssh://user@dummy/remote
searching for changes
changeset: 1:a28a9d1a809c
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: add
find incoming on the remote side
$ hg incoming -R ../remote -e "python $TESTDIR/dummyssh" ssh://user@dummy/local
comparing with ssh://user@dummy/local
searching for changes
changeset: 1:a28a9d1a809c
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: add
find incoming on the remote side (using absolute path)
$ hg incoming -R ../remote -e "python $TESTDIR/dummyssh" "ssh://user@dummy/`pwd`"
comparing with ssh://user@dummy/$TESTTMP/local
searching for changes
changeset: 1:a28a9d1a809c
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: add
push
$ hg push
pushing to ssh://user@dummy/remote
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
$ cd ../remote
check remote tip
$ hg tip
changeset: 1:a28a9d1a809c
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: add
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
2 files, 2 changesets, 3 total revisions
$ hg cat -r tip foo
bleah
$ echo z > z
$ hg ci -A -m z z
created new head
test pushkeys and bookmarks
$ cd ../local
$ hg debugpushkey --config ui.ssh="python $TESTDIR/dummyssh" ssh://user@dummy/remote namespaces
bookmarks
phases
namespaces
$ hg book foo -r 0
$ hg out -B
comparing with ssh://user@dummy/remote
searching for changed bookmarks
foo 1160648e36ce
$ hg push -B foo
pushing to ssh://user@dummy/remote
searching for changes
no changes found
exporting bookmark foo
$ hg debugpushkey --config ui.ssh="python $TESTDIR/dummyssh" ssh://user@dummy/remote bookmarks
foo 1160648e36cec0054048a7edc4110c6f84fde594
$ hg book -f foo
$ hg push --traceback
pushing to ssh://user@dummy/remote
searching for changes
no changes found
updating bookmark foo
$ hg book -d foo
$ hg in -B
comparing with ssh://user@dummy/remote
searching for changed bookmarks
foo a28a9d1a809c
$ hg book -f -r 0 foo
$ hg pull -B foo
pulling from ssh://user@dummy/remote
no changes found
updating bookmark foo
importing bookmark foo
$ hg book -d foo
$ hg push -B foo
pushing to ssh://user@dummy/remote
searching for changes
no changes found
deleting remote bookmark foo
a bad, evil hook that prints to stdout
$ cat <<EOF > $TESTTMP/badhook
> import sys
> sys.stdout.write("KABOOM\n")
> EOF
$ echo '[hooks]' >> ../remote/.hg/hgrc
$ echo "changegroup.stdout = python $TESTTMP/badhook" >> ../remote/.hg/hgrc
$ echo r > r
$ hg ci -A -m z r
push should succeed even though it has an unexpected response
$ hg push
pushing to ssh://user@dummy/remote
searching for changes
note: unsynced remote changes!
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: KABOOM
$ hg -R ../remote heads
changeset: 3:1383141674ec
tag: tip
parent: 1:a28a9d1a809c
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: z
changeset: 2:6c0482d977a3
parent: 0:1160648e36ce
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: z
clone bookmarks
$ hg -R ../remote bookmark test
$ hg -R ../remote bookmarks
* test 2:6c0482d977a3
$ hg clone -e "python $TESTDIR/dummyssh" ssh://user@dummy/remote local-bookmarks
requesting all changes
adding changesets
adding manifests
adding file changes
added 4 changesets with 5 changes to 4 files (+1 heads)
updating to branch default
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg -R local-bookmarks bookmarks
test 2:6c0482d977a3
passwords in ssh urls are not supported
(we use a glob here because different Python versions give different
results here)
$ hg push ssh://user:erroneouspwd@dummy/remote
pushing to ssh://user:*@dummy/remote (glob)
abort: password in URL not supported!
[255]
$ cd ..
Test remote paths with spaces (issue2983):
$ hg init --ssh "python $TESTDIR/dummyssh" "ssh://user@dummy/a repo"
$ hg -R 'a repo' tag tag
$ hg id --ssh "python $TESTDIR/dummyssh" "ssh://user@dummy/a repo"
3fb238f49e8c
$ cat dummylog
Got arguments 1:user@dummy 2:hg -R nonexistent serve --stdio
Got arguments 1:user@dummy 2:hg -R /$TESTTMP/nonexistent serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R local serve --stdio
Got arguments 1:user@dummy 2:hg -R $TESTTMP/local serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
changegroup-in-remote hook: HG_NODE=a28a9d1a809cab7d4e2fde4bee738a9ede948b60 HG_SOURCE=serve HG_URL=remote:ssh:127.0.0.1
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
changegroup-in-remote hook: HG_NODE=1383141674ec756a6056f6a9097618482fe0f4a6 HG_SOURCE=serve HG_URL=remote:ssh:127.0.0.1
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg init 'a repo'
Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio
Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio