view tests/test-exchange-obsmarkers-case-A6.t @ 44805:02bf61bb4a70

copy: to find copy source, walk parent of revision we're marking copies in

As shown in the previous patch, `hg cp --after --at-rev . src dst`
fails if `src` is not in `.`. It seems obvious that you should always
walk the *parent* of the revision you're marking copies in, but that's
not how it was done for the working copy, and I didn't think to change
it when marking copies in a non-working-copy commit.

This patch fixes that by walking the parent commit instead, but only
if we're marking copies for a non-working-copy commit. We need to
leave the working-copy code unchanged because it depends on the weird
behavior of `workingctx.walk()`. With these changes, there's very
little overlap between the working-copy version and the
non-working-copy version of `walkpats()`, but I've refrained from
cleaning that up on the stable branch.

Differential Revision: https://phab.mercurial-scm.org/D8494

============================================
Testing obsolescence markers push: Cases A.6
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category A: simple cases
TestCase 6: new markers between changesets already known on both side
Variants:
# a: explicit push
# b: bare push

A.6  new markers between changesets already known on both side
==============================================================

.. {{{
..   A ◕⇠● B
..     |/
..     ● O
.. }}}
..
.. Marker exist from:
..
..  * `A◕⇠● B`
..
.. Command runs:
..
..  * hg push -r B
..  * hg push
..
.. Expected exchange:
..
..  * `A◕⇠● B`

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

initial

  $ setuprepos A.6
  creating test repo for test case A.6
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A0
  $ hg update -q 0
  $ mkcommit A1
  created new head

make both changeset known in remote

  $ hg push -qf ../pushdest
  $ hg push -qf ../pulldest

create a marker after this

  $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
  1 new obsolescence markers
  obsoleted 1 changesets
  $ hg log -G --hidden
  @  e5ea8f9c7314 (draft): A1
  |
  | x  28b51eb45704 (draft): A0
  |/
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

  $ cp -R A.6 A.6.a
  $ cp -R A.6 A.6.b

Actual Test (explicit push version)
-----------------------------------

  $ dotest A.6.a A1
  ## Running testcase A.6.a
  # testing echange of "A1" (e5ea8f9c7314)
  ## initial state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "A1" from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 1 new obsolescence markers
  remote: obsoleted 1 changesets
  ## post push state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "e5ea8f9c7314" from main into pulldest
  pulling from main
  no changes found
  1 new obsolescence markers
  obsoleted 1 changesets
  ## post pull state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

Actual Test (bare push version)
-------------------------------

  $ dotest A.6.b
  ## Running testcase A.6.b
  ## initial state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 1 new obsolescence markers
  remote: obsoleted 1 changesets
  ## post push state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling from main into pulldest
  pulling from main
  searching for changes
  no changes found
  1 new obsolescence markers
  obsoleted 1 changesets
  ## post pull state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}