view tests/test-exchange-obsmarkers-case-B4.t @ 44805:02bf61bb4a70

copy: to find copy source, walk parent of revision we're marking copies in

As shown in the previous patch, `hg cp --after --at-rev . src dst`
fails if `src` is not in `.`. It seems obvious that you should always
walk the *parent* of the revision you're marking copies in, but that's
not how it was done for the working copy, and I didn't think to change
it when marking copies in a non-working-copy commit.

This patch fixes that by walking the parent commit instead, but only
if we're marking copies for a non-working-copy commit. We need to
leave the working-copy code unchanged because it depends on the weird
behavior of `workingctx.walk()`. With these changes, there's very
little overlap between the working-copy version and the
non-working-copy version of `walkpats()`, but I've refrained from
cleaning that up on the stable branch.

Differential Revision: https://phab.mercurial-scm.org/D8494

============================================
Testing obsolescence markers push: Cases B.4
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category B: pruning case
TestCase 4: Pruned changeset on common part of the history
Variants:
# a: explicite push
# b: bare push

B.4 Pruned changeset on common part of history
=============================================

.. {{{
..   ⊗ C
..   | ● B
..   | |
..   | ● A
..   |/
..   ● O
.. }}}
..
.. Marker exist from:
..
..  * C (prune)
..
.. Command run:
..
..  * hg push -r B
..  * hg push
..
.. Expected exchange:
..
..  * prune for C

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

initial

  $ setuprepos B.4
  creating test repo for test case B.4
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A
  $ mkcommit B
  $ hg phase --public .
  $ hg push ../pushdest
  pushing to ../pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 2 changesets with 2 changes to 2 files
  $ hg push ../pulldest
  pushing to ../pulldest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 2 changesets with 2 changes to 2 files
  $ hg update -q 0
  $ mkcommit C
  created new head
  $ hg prune -qd '0 0' .
  $ hg log -G --hidden
  x  7f7f229b13a6 (draft): C
  |
  | o  f6fbb35d8ac9 (public): B
  | |
  | o  f5bc6836db60 (public): A
  |/
  @  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

  $ cp -R B.4 B.4.a
  $ cp -R B.4 B.4.b

Actual Test (explicit push version)
-----------------------------------

  $ dotest B.4.a O
  ## Running testcase B.4.a
  # testing echange of "O" (a9bdc8b26820)
  ## initial state
  # obstore: main
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "O" from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "a9bdc8b26820" from main into pulldest
  pulling from main
  no changes found
  1 new obsolescence markers
  ## post pull state
  # obstore: main
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

Actual Test (bare push version)
-----------------------------------

  $ dotest B.4.b
  ## Running testcase B.4.b
  ## initial state
  # obstore: main
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling from main into pulldest
  pulling from main
  searching for changes
  no changes found
  1 new obsolescence markers
  ## post pull state
  # obstore: main
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}