exchangev2: fetch file revisions
Now that the server has an API for fetching file data, we can call into
it to fetch file revisions.
The implementation is relatively straightforward: we examine the
manifests that we fetched and find all new file revisions referenced
by them. We build up a mapping from file path to file nodes to
manifest node. (The mapping to first manifest node allows us to
map back to first changelog node/revision, which is used for the
linkrev.)
Once that map is built up, we iterate over it in a deterministic
manner and fetch and store file data. The code is very similar
to manifest fetching. So similar that we could probably extract the
common bits into a generic function.
With file data retrieval implemented, `hg clone` and `hg pull` are
effectively feature complete, at least as far as the completeness
of data transfer for essential repository data (changesets, manifests,
files, phases, and bookmarks). We're still missing support for
obsolescence markers, the hgtags fnodes cache, and the branchmap
cache. But these are non-essential for the moment (and will be
implemented later).
This is a good point to assess the state of exchangev2 in terms of
performance. I ran a local `hg clone` for the mozilla-unified
repository using both version 1 and version 2 of the wire protocols
and exchange methods. This is effectively comparing the performance
of the wire protocol overhead and "getbundle" versus domain-specific
commands. Wire protocol version 2 doesn't have compression implemented
yet. So I tested version 1 with `server.compressionengines=none` to
remove compression overhead from the equation.
server
before: user 220.420+0.000 sys 14.420+0.000
after: user 321.980+0.000 sys 18.990+0.000
client
before: real 561.650 secs (user 497.670+0.000 sys 28.160+0.000)
after: real 1226.260 secs (user 944.240+0.000 sys 354.150+0.000)
We have substantial regressions on both client and server. This
is obviously not desirable. I'm aware of some reasons:
* Lack of hgtagsfnodes transfer (contributes significant CPU to
client).
* Lack of branch cache transfer (contributes significant CPU to
client).
* Little to no profiling / optimization performed on wire protocol
version 2 code.
* There appears to be a memory leak on the client and that is likely
causing swapping on my machine.
* Using multiple threads on the client may be counter-productive because
Python.
* We're not compressing on the server.
* We're tracking file nodes on the client via manifest diffing
rather than using linkrev shortcuts on the server.
I'm pretty confident that most of these issues are addressable.
But even if we can't get wire protocol version 2 on performance parity
with "getbundle," I still think it is important to have the set of low
level data-specific retrieval commands that we have implemented so
far. This is because the existence of such commands allows flexibility
in how clients access server data.
Differential Revision: https://phab.mercurial-scm.org/D4491
# server.py - utility and factory of server
#
# Copyright 2005-2007 Matt Mackall <mpm@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
import os
from .i18n import _
from . import (
chgserver,
cmdutil,
commandserver,
error,
hgweb,
pycompat,
util,
)
from .utils import (
procutil,
)
def runservice(opts, parentfn=None, initfn=None, runfn=None, logfile=None,
runargs=None, appendpid=False):
'''Run a command as a service.'''
postexecargs = {}
if opts['daemon_postexec']:
for inst in opts['daemon_postexec']:
if inst.startswith('unlink:'):
postexecargs['unlink'] = inst[7:]
elif inst.startswith('chdir:'):
postexecargs['chdir'] = inst[6:]
elif inst != 'none':
raise error.Abort(_('invalid value for --daemon-postexec: %s')
% inst)
# When daemonized on Windows, redirect stdout/stderr to the lockfile (which
# gets cleaned up after the child is up and running), so that the parent can
# read and print the error if this child dies early. See 594dd384803c. On
# other platforms, the child can write to the parent's stdio directly, until
# it is redirected prior to runfn().
if pycompat.iswindows and opts['daemon_postexec']:
if 'unlink' in postexecargs and os.path.exists(postexecargs['unlink']):
procutil.stdout.flush()
procutil.stderr.flush()
fd = os.open(postexecargs['unlink'],
os.O_WRONLY | os.O_APPEND | os.O_BINARY)
try:
os.dup2(fd, procutil.stdout.fileno())
os.dup2(fd, procutil.stderr.fileno())
finally:
os.close(fd)
def writepid(pid):
if opts['pid_file']:
if appendpid:
mode = 'ab'
else:
mode = 'wb'
fp = open(opts['pid_file'], mode)
fp.write('%d\n' % pid)
fp.close()
if opts['daemon'] and not opts['daemon_postexec']:
# Signal child process startup with file removal
lockfd, lockpath = pycompat.mkstemp(prefix='hg-service-')
os.close(lockfd)
try:
if not runargs:
runargs = procutil.hgcmd() + pycompat.sysargv[1:]
runargs.append('--daemon-postexec=unlink:%s' % lockpath)
# Don't pass --cwd to the child process, because we've already
# changed directory.
for i in pycompat.xrange(1, len(runargs)):
if runargs[i].startswith('--cwd='):
del runargs[i]
break
elif runargs[i].startswith('--cwd'):
del runargs[i:i + 2]
break
def condfn():
return not os.path.exists(lockpath)
pid = procutil.rundetached(runargs, condfn)
if pid < 0:
# If the daemonized process managed to write out an error msg,
# report it.
if pycompat.iswindows and os.path.exists(lockpath):
with open(lockpath, 'rb') as log:
for line in log:
procutil.stderr.write(line)
raise error.Abort(_('child process failed to start'))
writepid(pid)
finally:
util.tryunlink(lockpath)
if parentfn:
return parentfn(pid)
else:
return
if initfn:
initfn()
if not opts['daemon']:
writepid(procutil.getpid())
if opts['daemon_postexec']:
try:
os.setsid()
except AttributeError:
pass
if 'chdir' in postexecargs:
os.chdir(postexecargs['chdir'])
procutil.hidewindow()
procutil.stdout.flush()
procutil.stderr.flush()
nullfd = os.open(os.devnull, os.O_RDWR)
logfilefd = nullfd
if logfile:
logfilefd = os.open(logfile, os.O_RDWR | os.O_CREAT | os.O_APPEND,
0o666)
os.dup2(nullfd, procutil.stdin.fileno())
os.dup2(logfilefd, procutil.stdout.fileno())
os.dup2(logfilefd, procutil.stderr.fileno())
stdio = (procutil.stdin.fileno(), procutil.stdout.fileno(),
procutil.stderr.fileno())
if nullfd not in stdio:
os.close(nullfd)
if logfile and logfilefd not in stdio:
os.close(logfilefd)
# Only unlink after redirecting stdout/stderr, so Windows doesn't
# complain about a sharing violation.
if 'unlink' in postexecargs:
os.unlink(postexecargs['unlink'])
if runfn:
return runfn()
_cmdservicemap = {
'chgunix': chgserver.chgunixservice,
'pipe': commandserver.pipeservice,
'unix': commandserver.unixforkingservice,
}
def _createcmdservice(ui, repo, opts):
mode = opts['cmdserver']
try:
return _cmdservicemap[mode](ui, repo, opts)
except KeyError:
raise error.Abort(_('unknown mode %s') % mode)
def _createhgwebservice(ui, repo, opts):
# this way we can check if something was given in the command-line
if opts.get('port'):
opts['port'] = util.getport(opts.get('port'))
alluis = {ui}
if repo:
baseui = repo.baseui
alluis.update([repo.baseui, repo.ui])
else:
baseui = ui
webconf = opts.get('web_conf') or opts.get('webdir_conf')
if webconf:
if opts.get('subrepos'):
raise error.Abort(_('--web-conf cannot be used with --subrepos'))
# load server settings (e.g. web.port) to "copied" ui, which allows
# hgwebdir to reload webconf cleanly
servui = ui.copy()
servui.readconfig(webconf, sections=['web'])
alluis.add(servui)
elif opts.get('subrepos'):
servui = ui
# If repo is None, hgweb.createapp() already raises a proper abort
# message as long as webconf is None.
if repo:
webconf = dict()
cmdutil.addwebdirpath(repo, "", webconf)
else:
servui = ui
optlist = ("name templates style address port prefix ipv6"
" accesslog errorlog certificate encoding")
for o in optlist.split():
val = opts.get(o, '')
if val in (None, ''): # should check against default options instead
continue
for u in alluis:
u.setconfig("web", o, val, 'serve')
app = hgweb.createapp(baseui, repo, webconf)
return hgweb.httpservice(servui, app, opts)
def createservice(ui, repo, opts):
if opts["cmdserver"]:
return _createcmdservice(ui, repo, opts)
else:
return _createhgwebservice(ui, repo, opts)